• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.865-874
• /
• 2020

Offshore drilling units have a very dangerous working conditions due to the harsh working environment of the ocean and the high possibility of fire or explosion. This study would identify the hazards that emerge from the marine environment in the operation and maintenance phase of offshore drilling units and show how these hazards can be reduced through risk assessment/management. Various risk reduction and management measures were first reviewed, and Job Safety Analysis (JSA) was selected as the risk assessment technique of this study. In order to understand the characteristics of offshore drilling operations, accident statistics of onshore and offshore drilling were analyzed and compared with each other, and major risk factors for offshore drilling were derived. The jobs in which offshore drilling accidents occur more frequently than onshore drilling was analyzed as the job of fastening, transporting and moving pipes and various materials. This result is due to the limited space of the ocean and the work environment that is prone to being shaken by wind, waves and ocean currents. Based on these statistical results, the job of picking and making up drill pipes was selected as a high-risk job, and JSA was performed as an example. A detailed safety check procedure is proposed so that workers can fully recognize the danger and perform work in a safe state that has been confirmed.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.37-46
• /
• 2015

In this paper, the heat transfer characteristics of PCB (Printed Circuit Board) with cabon CCL (Copper Claded Layer) were studied through experiments and numerical analysis to compare of PCBs with conventional the FR-4 core and heavy copper cores. For study, samples are producted with HDI (High Density Interconnection) PCB of mobile phone with variations of thickness of core materials and grades of carbon material to evaluate heat transfer characteristics respectively. From this research results, heat transfer characteristics of the carbon core was rather low than heavy copper, but better than FR-4 core. In addition, even though the carbon and heavy copper core contributed on the heat transfer characteristics as their thickness increases, FR-4 cores disturbed heat transfer characteristics as it's thickness increases. Therefore, carbon core is recommendable to improve the heat transfer characteristics of the PCB because heavy copper core has much disadvantages such as increasing of wear of drill, the weight of PCB, and manufacturing cost by additional insulation materials for electrical insulation.

• Steel and Composite Structures
• /
• v.36 no.4
• /
• pp.417-426
• /
• 2020

Drilling processes in fiber-reinforced polymer composites are essential for the assembly and fabrication of composite structural parts. The economic impact of rejecting the drilled part is significant considering the associated loss when it reaches the assembly stage. Therefore, this article tends to illustrate the effect of cutting conditions (feed and speed), and laminate thickness on thrust force, torque, and delamination in drilling woven E-glass fiber reinforced epoxy (GFRE) composites. Four feeds (0.025, 0.05, 0.1, and 0.2 mm/r) and three speeds (400, 800, and 1600 RPM) are exploited to drill square specimens of 36.6×36.6 mm, by using CNC machine model "Deckel Maho DMG DMC 1035 V, ecoline". The composite laminates with thicknesses of 2.6 mm, 5.3 mm, and 7.7 mm are constructed respectively from 8, 16, and 24 glass fiber layers with a fiber volume fraction of about 40%. The drilled specimen is scanned using a high-resolution flatbed color scanner, then, the image is analyzed using CorelDraw software to evaluate the delamination factor. Multi-variable regression analysis is performed to present the significant coefficients and contribution of each variable on the thrust force and delamination. Results illustrate that the drilling parameters and laminate thickness have significant effects on thrust force, torque, and delamination factor.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.1
• /
• pp.95-112
• /
• 1998

The Error Backpropagation algorithm is widely used in various areas such as associative memory, speech recognition, pattern recognition, robotics and so on. However, if and when a new leaning pattern has to be added in order to drill, it will have to accomplish a new learning with all previous learning pattern and added pattern from the very beginning. Somehow, it brings about a result which is that the more it increases the number of pattern, the longer it geometrically progress the time required by leaning. Therefore, a so-called Incremental Learning Method has to be solved the point at issue all by means in case of situation which is periodically and additionally learned by numerous data. In this study, not only the existing neural network construction is still remained, but it also suggests a method which means executing through added leaning by a model pattern. Eventually, for a efficiency of suggested technique, both Monk's data and Iris data are applied to make use of benchmark on machine learning field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.591-597
• /
• 2001

Ti alloy is used for essential parts of aircraft for high temperature environment. Although Ti alloy has excellent performance in regard to mechanical properties, it is difficult ot find fatigue cracks by nondestructive ultrasonic inspection due to its two-phase microstructure, which consists of hard alpha and beta phases. Sound energy reflected from microstructural features in the component produces a background inspection noise which is seen even when no defects are present. This noise can inhibit the detection of critical internal defects such as pores cracks or inclusions. To obtain fundamental data on ultrasonic inspection of Ti alloy, ultrasonic testing was performed using a specimen with small drill holes and ultrasonic wave propagation velocites were measured.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.5-12
• /
• 2007

Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The sliding of cut slope frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. The study in this paper shows that mudstone having enough strength in a boring stage has lost the strength after installing PRD (percussion rotary drill) steel pipe pile inducing an insufficient bearing capacity. Field test has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, confirmed by the static load test.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.18 no.1
• /
• pp.39-48
• /
• 2012

Background: This study was performed to identify what effect plyometric exercise with application of kinesio taping gives on muscle activity and power of lower limb. Methods: In order to conduct research, total 14 male students at G university located Gwangyang city were randomly assigned; 7 for experimental group (with kinesio taping application) and 7 for control groups(without kinesio taping application) were conducted with box drill, one of the plyometric exercise 5 times a week for 4 weeks. Muscle activities were measured by using electrodiagnosis equipment on quadriceps and gastrocnemius. Collected data was analyzed by using Windows SPSS version 19.0. Results: Muscle activities show statistically significant differences (p<.05) both before and after exercise in experimental and control groups in terms of vastus medialis, rectus femoris, vastus lateralis and lateral gastrocnemius. However, only medial gastrocnemius shows statistically significant differences in experimental group compared before and after exercise. Sargent jump for measuring power shows that only experimental group presents statistically significant differences (p<.05). Two groups show that vastus medialis, vastus lateralis, lateral gastrocnemius and medial gastrocnemius only in muscle activities show statistically significant differences (p<.05) after exercise. Conclusion: The result of this survey indicates that plyometric exercise is effective to improve muscle activity and power of lower limb, especially, the group who exercises with application of kinesio tape is more effective than the other group with no tape application. Therefore, it is considered that plyometric exercise with tape is more effective to improve power and muscle strength.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.101-109
• /
• 2016

PURPOSE. To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (${\mu}CT$) and regional push-out bonding strength. MATERIALS AND METHODS. Twenty-one, single and round shaped roots were enlarged with a low-speed drill following by endodontic treatment. The roots were divided into three groups (n=7) and fiber posts were cemented with Maxcem Elite, Multilink N and Superbond C&B resin cements. Specimens were scanned using ${\mu}CT$ scanner at resolution of $13.7{\mu}m$. The number, area, and volume of voids between dentin and post were evaluated. A method of analysis based on the post segmentation was used, and coronal, middle and apical thirds considered separately. After the ${\mu}CT$ analysis, roots were embedded in epoxy resin and sectioned into 2 mm thick slices (63 sections in total). Push-out testing was performed with universal testing device at 0.5 mm/min cross-head speed. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Overall, significant differences between the resin cements and the post level were observed in the void number, area, and volume (P<.05). Super-Bond C&B showed the most void formation ($44.86{\pm}22.71$). Multilink N showed the least void surface ($3.51{\pm}2.24mm^2$) and volume ($0.01{\pm}0.01mm^3$). Regional push-out bond strength of the cements was not different (P>.05). CONCLUSION. ${\mu}CT$ proved to be a powerful non-destructive 3D analysis tool for visualizing the void parameters. Multilink N had the lowest void parameters. When efficiency of all cements was evaluated, direct relationship between the post region and push-out bonding strength was not observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.387-391
• /
• 2000

Barley straw is a good source of organic matter for next crop growth following barley. This study was conducted to investigate effects of barley straw application methods (application, removal, or incineration) on growth and yield in soybean cultivation following barley. A soybean variety, Eunhakong, was sown on 12 June with drill-seeder attached to tractor after tillage. Barley straw application resulted in increase in organic matter content compared to removal and incineration of barley straw, and soil physical properties such as water content and porosity, were improved by application and incineration of barley straw. Weed occurrence was deterred by 44% in barley straw application and by 31% in barley straw incineration compared with removal of barley straw. Number and dry weight of soybean nodules were move abundant in barley straw application than the other treatments at 4 and R2 stages. Barley straw application had less for dry weight than barley straw removal but greater than incineration of barley straw about 30 days after seeding. However barley straw application caused greater top dry weight 90 days after seeding. Root dry weight was not affected by barley straw application method at all growth stage. There're no significant differences in soybean yield among barley straw application methods.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.211-218
• /
• 2018

Purpose: The purpose of this study is to find a way to use the disaster drill system that can be used in the training in the required situation in the safety training situation in the safety industry to prepare for the disaster in the energy industry field by utilizing the developed system. Method: In order to accomplish the purpose of the research, I investigated the papers, reports, statistical data, and visited the site to investigate the training situation. Results: Disaster response safety Korean training is not only responding to disasters but also cooperating activities with local governments and related organizations. The contents are complex, diverse, and multifaceted. Conclusion: The disaster training system should be applied to the self training of the organization to prepare for the disaster and the safety training for disaster response in Korea.