• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2341-2344
• /
• 1999

In $SiH_4$ + Ar mixture gas contains 0.5% and 5% monosilane, this paper calculated electron swarm parameters in E/N has ratio 1$\sim$300(Td) and P : I (Torr) by MCS and Beq method. Electron swarm parameters showed a irregularity change in Ar mixed a little monosilane. It tends that the electron drift velocity is inversely proportional to E/N. It also represented characteristics that the transverse diffusion coefficient depends on E/N.

• Earthquakes and Structures
• /
• v.1 no.3
• /
• pp.307-326
• /
• 2010

This paper is concerned with the optimal seismic design of added viscous dampers in yielding plane frames. The total added damping is minimized for allowable values of local performance indices under the excitation of an ensemble of ground motions in both regular and irregular structures. The local performance indices are taken as the maximal inter-story drift of each story and/or the normalized hysteretic energy dissipated at each of the plastic hinges. Gradients of the constraints with respect to the design variables (damping coefficients) are derived, via optimal control theory, to enable an efficient first order optimization scheme to be used for the solution of the problem. An example of a ten story three bay frame is presented. This example reveals the following 'fully stressed characteristics' of the optimal solution: damping is assigned only to stories for which the local performance index has reached the allowable value. This may enable the application of efficient and practical analysis/redesign type methods for the optimal design of viscous dampers in yielding plane frames.

• Earthquakes and Structures
• /
• v.10 no.6
• /
• pp.1291-1314
• /
• 2016

The paper presents the development of experimental fragility functions for exterior RC beam-column connections based on results obtained from extensive testing carried out in the present study. Three typical types of seismically deficient beam-column connections, which are commonly prevalent in Indian sub-continent, were considered. These specimens were tested under cyclic displacement histories with different characteristics to induce different damage states. Rehabilitation specific fragility functions for damaged specimens were developed considering drift angle as a demand parameter. Four probability distributions were fit to the data and suitability of each distribution was evaluated using standard statistical method. Specimens with different damage states were rehabilitated appropriately and rehabilitated specimens were tested under similar displacement histories. Fragility functions for rehabilitated specimens have also been developed following similar procedure. Comparison of fragility functions for both original and rehabilitated specimens for each rehabilitation method showed close agreement, which establishes the effectiveness of the adopted rehabilitation strategies and hence would provide confidence in field application.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.228-235
• /
• 1999

As a seismic damper the viscoelastic damper is known the effective method to control the drift of the flexible building. As the viscoelastic damper has the characteristics of both damping and stiffness specially when the rubber material used hysteretic damping. The behavior of the hysteretic damping is quite different from that of the viscous damping. For the evaluation of the viscoelastic damper for the seismic purpose the nonlinear response spectrum was generated based on the dynamic test of the viscoelastic damper and the results is compared to that of the typical linear response spectrum,

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1048-1064
• /
• 2005

Detection of specific compounds influencing food flavor quality is not easy. Electronic nose, comprised of electronic chemical sensors with partial specificity and appropriate pattern recognition system, is capable of recognizing simple and complex volatiles. It provides fast analysis with simple and straightforward results and is best suited for quality control and process monitoring of flavor in food industry. This review examines application of electronic nose in food analysis with brief explanation of its principle. Characteristics of different sensors and sensor drift. and solutions to related problems are reviewed. Applications of electronic nose in food industry include monitoring of fermentation process and lipid oxidation, prediction of shelf life, identification of irradiated volatile compounds, discrimination of food material origin, and quality control of food and processing by principal component analysis and neural network analysis. Electronic nose could be useful for quality control in food industry when correlating analytical instrumental data with sensory evaluation results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.75-78
• /
• 2016

This research was designed 700 level power MOSFET for smart LED driver ICs package. And we analyzed electrical characteristics of the power MOSFET as like breakdown voltage, on-resistance and threshold voltage. Because this research is important optimal design for smart LED ICs package, we designed power MOSFET with design and process parameter. As a result of this research, we obtained $60{\mu}m$ N-drift layer depth, 791.29 V breakdown voltage, $0.248{\Omega}{\cdot}cm^2$ on resistance and 3.495 V threshold voltage. We will use effectively this device for smart LED driver ICs package.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.44.1-44.1
• /
• 2009

Identification of wave characteristics during current disruption events in the near-Earth geomagnetic tail region (~ 10 RE) is important to understand the substorm onset mechanism. In this paper, linear stability analysis in the ion-cyclotron grequency range, considering temperature anisotropy and cross-field flow is presented. It is found that the ion-cyclotron drift waves propagating in a quasi-perpendicular direction with respect to the ambient magnetic field are characterized by low frequencies ($\omega$ < $0.5{\Omega}ci$), while quasi-parallel waves have frequencies close to the ion-cyclotron frequency ($\omega{\sim}{\Omega}ci$). This finding is consistent with the observation by THEMIS spacecraft of a current disruption event in which a similar high- and low-frequency band structure is also present [A. T. Y. Lui, et al., J. Geophys. Res. 113, A00C06 (2008)]. It is also found that the quasi-perpendicular mode is excited by the ion cross-field flow.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.2 no.2
• /
• pp.9-16
• /
• 1965

The characteristics of electronic multipliers and their accuracy are analyzed. From the analysis a low cost, four-quadrant timedivision electronic multiplier jis built. This multiplier produces an output voltage equal to 0.01 of the instantaneous product of two input voltage representing independent variables. Each input may either be constant or vary with time over a range of ${\pm}$100 volts. Drift and noise in this multiplier are kept at very low level and dynamic response is below 0.5 decibels up to 700 cycles per second. Methods of testing this multiplier and the results are also described. It is shown that the results agree with theoretical values satisfactorily.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.128-132
• /
• 2004

This paper presents the design, fabrication sequence and measurement results of a highly sensitive capacitive-type humidity sensor using a polyimide film without hydrophobic elements. The structure of the humidity sensor is MIM (metalinsulator-metal). For a high sensitivity, a modified aromatic polyimides as a moisture absorbing layer has been synthesized instead of using general polyimides containing hydrophobic elements. The polyimide film was obtained by synthesizing and thermally polymerizing polyamic acid composed of m-pyromellitic dianhydride, phenelenediamine and dimethylacetamide. Characteristics of fabricated sensors which include sensitivity, hysteresis and stability have been measured. The measurement result shows the percent normalized capacitance change of 0.37/%RH over a range from 10 to 90%RH, hysteresis of 0.77% over the same %RH range and maximum drift of 0.25% at 50%RH. The result shows that the developed humidity sensor can be applied to evaluate a hermeticity of various sensors and actuator systems as well as micro packages.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.492-499
• /
• 1997

Experimental research was conducted to investigate structural performance of concrete columns confined with welded reinforcement grids were tested under simulated seismic loading. The columns were subjected to constant axial compression accompanied by incrementally increasing lateral deformation reversals. The results indicate thar welded reinforcement grid can be used effectively as confinement reinforcement provided that the steel used, have sufficient ductility and the welding process employed does not alter the strength and elongation characteristics of steel. The grids improved the structural performance of columns, which developed lateral drift ratios in excess of 3% with the spacing and volumetric ratio of transverse reinforcement similar to those required by the ACI 318-95 Building Code.