• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.339-348
• /
• 2006

The present paper described the relationship between dental anxiety and main colors of elementary student's drawing of dentists. This paper is based on the survey with 555 samples were chosen from a first, second and third grade students of the elementary school located in Chilgok-gun Gyeongsangbuk-do. During the survey, students were asked to picture a dentist by using 12 colors crayon randomly. And the survey result was summarized in three categories. Those are the main color(most frequently used color) distribution in the children's drawings, ratio differences of the main color in terms of gender and the anxiety score for the each color. 1. The order of main colors was blue, white, green, gray, yellow, purple, ocher yellow, orange, pink, red, black and brown from the top to bottom. 2. The main colors distribution in terms of gender, male mostly used green and black compare to female, and female mostly used pink, yellow and white compare to male(p<0.01). 3. The order of the anxiety score for main colors is black, brown, red, yellow, pink, orange, green, white, gray, blue, purple and ocher yellow form the top to bottom(p<0.01).

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.4
• /
• pp.17-25
• /
• 2015

Purpose: At the moment, There is a facility standard for intensive care units on the Korea medical services Act. However, the contents of regulation are so limited and difficult to apply. Therefore, it is necessary to draw up the guideline to complement the regulation for efficient operation of intensive care units. This study aims to suggest basic data for guideline of intensive care units. Methods: 2 Methods have been used in this paper. 1) Comparative analysis between the national regulation of Korea with the design standard of the United States America, the United Kingdom and Australia. 2) A literature survey about operation method for intensive care unit, focused on materials published in intensive care medicine society of each country. Results: In comparison with guideline of abroad cases, additional supplement are required, with regard to item such as operation environment, size, nursing manpower ratio, bed space area, space program of intensive care units for healing environment. Implications: This study is a basic research for guideline of intensive care unit, and need to be followed by further study using various perspectives and methods.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.449-458
• /
• 2007

The aims of this study were to investigate the intercalation of polymer chains with organoclays and improve the thermo-mechanical properties of poly(butylene terephthalate) (PBT) hybrids by comparing PBT hybrids synthesized using two different organoclays. The organoclays; dodecyltriphenylphosphonium-montmorillonite ($C_{12}PPh-MMT$) and dodecyltriphenylphosphonium-mica ($C_{12}PPh-Mica$), were used to fabricate the PBT hybrid fibers. Variations in the properties of the hybrid fibers with the organoclays within the polymer matrix, as well as the draw ratio (DR), are discussed. The thermo-mechanical properties and morphologies of the PBT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, electron microscopy and mechanical tensile properties analysis. The nanostructures of the hybrid fibers were determined using both scanning and transmission electron microscopies, which showed some of the clay layers to be well dispersed within the matrix polymer, although some clustered or agglomerated particles were also detected. The thermal properties of the hybrid fibers were found to be better than those of the pure PBT fibers at a DR = 1. The tensile mechanical properties of the $C_{12}PPh-MMT$ hybrid fibers were found to worsen with increasing DR. However, the initial moduli of the $C_{12}PPh-Mica$ hybrid fibers were found to slightly increase on increasing the DR from 1 to 18.

• Journal of Radiation Industry
• /
• v.11 no.3
• /
• pp.139-144
• /
• 2017

To evaluation of clinical usefulness for B1+RMS limits, we compared image quality of Routine, Specific absorption rate (SAR) and Root mean square (RMS) protocol. 5 volunteers underwent Magnetic Resonance Imaging (MRI) scan of the brain using three different protocols. We draw Region of interest ROI in cortex, white matter, gray matter, putamen and thalamus of axial plan. Signal to noise ratio (SNR) were evaluated in each area and Contrast to noise ration (CNR) were evaluated between white matter and gray matter. Qualitative evaluation was used to score each ROI. B1+RMS is confirmed its usefulness compared to conventional SAR standard on the aspect of improvement of image quality, reduction of scan time and easy adjusting parameter.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.70-77
• /
• 2022

Wet-spun regenerated silk fibroin (RSF) fibers have been extensively studied owing to their 1) useful properties as biomaterials, including good blood compatibility and cyto-compatibility; 2) the various methods available to control the structural characteristics and morphology of the fiber, and 3) the possibility of fabricating blended fibers and new material-embedded fibers. In this study, silk nanofibrils prepared using a new method were embedded in RSF to fabricate wet-spun silk nanofibril/RSF composite fibers. Up to 2% addition of silk nanofibril, the silk nanofibril/RSF dope solution showed slight shear thinning, and the G' and G" of the dope solution were similar. However, above 3% silk nanofibril content, the viscosity of the dope solution significantly increased. In addition, shear thinning was remarkably evident, and the G' of the dope solution was much higher than the G", indicating a very elastic state. As the silk nanofibril content was increased, the wet-spun silk nanofibril/RSF composite fiber became uneven, with a rough surface, and more beaded fibers were produced. Scanning electron microscopy observations revealed that the beaded fibers were attributed to the inhomogeneous dispersion and presence of agglomerates of the silk nanofibrils. As the silk nanofibril content and RSF concentration increased, the maximum draw ratio decreased, indicating the deterioration of the wet spinnability and post-drawing performance of silk nanofibril/RSF.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.63-67
• /
• 2015

In this study, we demonstrate the change of optical characteristic by thickness of metal deposition on nano metal grid polarizer film fabrication. Nano metal grid polarizer film consists of aluminium grid polarizer layer on PET (Polyethylene phthalate) substrate. We aim at metal grid layer formation for the large nano wire grid polarizer fabrication. we draw process conditions of the nano metal grid polarizer film fabrication to improve transmittance and extinction ratio and Nano wire grid polarizer film (NWGP) film is fabricated with 140 nm pitch, 70 nm width, and 70 nm depth of metal grid on optimum design conditions. As a result, we get high optical properties of nano wire grid polarizer which is the maximum transmittance of 80% and the extinction ratio of $10^6$ at 600 nm wavelength respectively.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.7-19
• /
• 1997

The purpose of the study was to investigate the shrinkage and creep behavior of PET filaments which were prepared at various spinning speeds(3,300, 4,000, 5,000, 6,000, and 7,000m/min) and anneal($120^{\circ}$, 30min & $150^{\circ}$, 40min). In order to determine the shrinkage and creep behavior with the crystallinity change, PET filaments were treated with low(12$0^{\circ}C$, 30min) and high($150^{\circ}$, 40min) temperature conditions with hot air dryer under the constant tension. The results of the study were as follows: as the spinning speed increased, the degree of shrinkage and elongation of the sample treated by wet condition decreased. The sample with 0.01g/d of load under various spinning speeds showed shrinkage behavior and highest shrinkage ratio at $76^{\circ}$ which was Tg of PET. The degree of shrinkage and elongation of the treated sample was less than those of the untreated sample by wet treatment. Especially, there was less degree of shrinkage and elongation of the sample treated by higher temperature condition. In 3,300m/min of spinning speed the draw ratio of undrawn yarn of a mixture of a-axis orientation and c-axis orientation was 2.0, which is similar to the value of the traditional drawn yarn. Finally, there was a big range of shrinkage and elongation by wet treatment in 3,300 m/min of spinning speed.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.1-10
• /
• 2014

Purpose: This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m $s^{-1}$, 0.11 m $s^{-1}$, and 0.13 m $s^{-1}$ respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s $m^{-1}$ (255 rpm based on 0.3 m $s^{-1}$) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.171-177
• /
• 2008

As the risk of traffic accidents caused by mists emerged as a social problem, recently safety facilities to be prepared for mists are being actively installed when designing roads. But in some part, the facilities are being installed imprudently without analyzing the extent of occurrences of mists that would increase the risk of traffic accidents and appropriate countermeasures against the occurrences of mists are not being suggested. For that reason, in this study, first questionnaire surveys were executed on road users in order to draw the factors affecting the traffic accidents caused by mists, a mist traffic accident predicting model was developed and an accident seriousness determining model that can determine accident seriousness was developed. In this way, by extracting major factors affecting mist traffic accidents to grasp risk factors in roads to be caused by mists, safety of roads can be enhanced and traffic accidents in road operations can be decreased. As the affecting factors influencing mist traffic accidents, were extracted sightable distances, durations of mists and whether daytime or nighttime as major factors and the plan to install the facilities for the prevention of mist traffic accidents was suggested to prevent the traffic accidents to be caused by those factors and also the plan to operate roads considering sightable distances was suggested to solve the problem of insufficient sightable distances to be caused by mists was suggested. It is judged that the road safety in the areas where mists occur can be improved through foregoing methods.

• Journal of Nutrition and Health
• /
• v.50 no.4
• /
• pp.376-382
• /
• 2017

Purpose: The consistent rise in the number of foreign students in Korea demands an accurate and detailed investigation into their dietary practices and nutritional status. For these international students, assimilation into new cultures can be stressful. The influence this process may have on dietary behaviors as well as overall health cannot be overlooked. Methods: The researchers in this study sought to investigate the nutritional status and dietary practices of Ghanaian students studying in Korea. A total of 81 Ghanaian male students with an average age of $29.4{\pm}4.0years$ were sampled between May and June 2016. Investigations were carried out on the general characteristics of the participants, their daily food and nutrient intakes using a 24-h dietary recall method, meal skipping practices, and the nutritional quality of their diets based on their meal skipping habits. Results: The study revealed that the daily nutrient intake of subjects did not fully meet the daily recommended nutrient intake (RNI) established by Ghanaian Ministry of Health and the World Health Organization (WHO) and Food and Agriculture Organization (FAO), particularly for energy, calcium, iron, zinc, and vitamin B2 requirements. The Nutrient Adequacy Ratio (NAR) for calcium was very low, posing a deficiency risk to the participants. Meal skipping practices among participants changed significantly after arriving in Korea. The study also compared the diet quality indicators (Nutrient Adequacy Ratio and Mean Adequacy Ratio) of those who skipped meals ${\geq}7times/week$ with those who skipped meals < 7 times/week. Participants who skipped meals ${\geq}7times/week$ were shown to have lower dietary intakes of vitamins B1 and B2 than those who skipped meals < 7 times/week. Conclusion: Ultimately, the study found that meal skipping among Ghanaian students was common, and their daily nutrient intakes did not meet the set dietary standards. Those who skipped meals ${\geq}7times/week$ had lower dietary intakes of vitamins B1 and B2 than those who skipped meals < 7 times/week. Based on our study findings, we recommend that nutrition education should be organized for the Ghanaian student community in Korea using our results as a template to draw up a nutrition program that is culturally appropriate.