• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.448-457
• /
• 2006

HRTF DB, including the information of the sounds which is arrived to our ears, is generally used to make a 3D sound. But it can decline some three-dimensional effects by the confusion between front and back directions due to the non-individual HRTF depending on each listener. In this paper, we propose a new method to use psychoacoustic theory that reduces the confusion of sound image localization. And we make use of an excitation energy by the sense of hearing. This method is brought HRTF spectrum characteristics into relief to draw out the energy ratio about the bark band. Informal listening tests show that the proposed method improves the front-back sound localization characteristics much better than the conventional methods.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.834-840
• /
• 2001

Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers big power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shaped curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. This paper describes a mathematical model of profile shifted involute gear. and this model is based on Camus's theory. We draw three dimensions gear have accurate mathematical function using ADS, VisualLISP. and To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• Steel and Composite Structures
• /
• v.8 no.2
• /
• pp.145-158
• /
• 2008

In slender sections there is a substantial post-buckling strength provided after the formation of local buckling waves. These waves happened due to normal stresses or shear stresses or both. In this study, a numerical investigation of the behavior of slender I-section beams in combined pure bending and shear has been described. The studied cases were assumed to be prevented from lateral torsional buckling. To achieve this aim, a finite element model that simulates the geometric and material nonlinear nature of the problem has been developed. Moreover, the initial geometric imperfections were included in the model. Different flange and web width-thickness ratios as well as web panel aspect ratios have been considered to draw complete set of interaction diagrams. Results reflect the interaction behavior between flange and web in resisting the combined action of moments and shear. In addition, the web panel aspect ratio will not significantly affect the combined ultimate shear-bending strength as well as the post local buckling strength gained by the section. Results are compared with that predicted by both the Eurocode 3 and the American Iron and Steel specifications, AISI-2001. Finally, an empirical interaction equation has been proposed.

• Economic and Environmental Geology
• /
• v.11 no.4
• /
• pp.143-167
• /
• 1978

The Sangdong tungsten (mostly scheelite) mine is located on the southern limb of a major syncline, the Hambaeg syncline, in a thick sequence of lower Paleozoic sedimentary rocks in the mideastern part of south Korea. Productive scheelite mineralization in Sangdong area is confined to one single formation, the Myobong Slate. Four major ore beds, which have an lateral extension over than 1 km and were not heavily subjected to spatial disturbance, are developed in the Myobong Formation. The original materials of the ore-comprising horizones were probably of either calcareous or silceous sediments. The four ore beds, especially in the case of Main ore bed, display both lateral and vertical zoning. Association quartz-mica-scheelite is predominant in the central, while association hornblende-quartz-diopside-scheelite, diopside-garnet and wollastonite-garnet are developed in this order towards the periphery of the ore beds. Petrologically, two phases of thermometamorphism are recognized. The first phase is represented by the association wollastonite-garnet and diopside-garnet, while the second phase by the association hornblende-quartz-diopside-scheelite and quartz-mica-scheelite. The associations of the second phase do constitute prodctive ore. The high background value of tungsten in the area surrounding the Sangdong mine reveals that the area can be considered a geochemical zone enriched in tungsten. Studies on the trace element patterns were carried out to draw useful criteria for the purpose of future geochemical exploration in the area. The increasing trend of the ratio Rb $({\times}1000)/K_2O$ of the Myobong Slate towards the known mineralization area proved to be indicative for the presence of tungsten mineralization.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.633-638
• /
• 2009

Lightweight materials were fabricated using glass abrasive sludge, bottom ash and slag powder in this study. This study tried to draw the correlation between physical properties and internal pore of lightweight material. The content of bottom ash and slag powder was from 10% to 50% and firing temperature from $760{^{\circ}C}\;to\;800{^{\circ}C}$ in rotary kiln. The lightweight material containing bottom ash or slag powder had a specific gravity of $0.21{\sim}0.70$ at particle size $2{\sim}4$ mm. Replacement ratio of the admixture increasing with specific gravity increased. Fracture strength of panel made with various lightweight materials was $32{\sim}55\;kgf/cm^2$ and flexural strength was $11{\sim}18\;kgf/cm^2$. Fracture strength increased by 72% and flexural strength was 63% compared with reference. Thermal conductivities of panel was $0.07{\sim}0.11W/m{\cdot}k$. The water absorption ratios of panel with lightweight materials containing bottom ash were $1.8{\sim}2.8$% and slag powder were $2.65{\sim}2.8$%. Excellent results on resistant of water absorption.

• Transactions of Materials Processing
• /
• v.22 no.8
• /
• pp.442-449
• /
• 2013

The solenoid valve case of an 8-speed automatic transmission plays a role in maintaining the valve seal, which prevents an inflow of foreign substances into the transmission. The seal increases the reliability of the automatic transmission's performance. As a solution to pollution-related problems and to reduce fuel consumption, transmissions are being made with more gears to work more economically and have reduced fuel consumption. These newer transmission require greater dimensional tolerances and need to be manufactured with more precision. In the current study, the design of a multistage drawing considering both the product's height and limit draw ratio (LDR) of the material was performed using both a theoretical analysis and the expertise of industrial experts. The finite element modeling (FEM) simulation was performed using the commercial software, PAM-stamp, and tests of the dimensional measurements for a prototype were performed to verify the optimal progressive process.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.436-441
• /
• 2007

In this work, the multiwalled carbon nanotubes(MWNTs) were functionalized with sodium dodecylbenzene sulfonate(SDBS) and then MWNTs/Lyocell composite fibers were prepared. The properties of MWNTs, the functionlization on the surface of MWNTs and their dispersion in the cellulose matrix were characterized by TEM, SEM, WAXD and FT-IR. The results showed that SDBS has been coated successfully onto the surface of the MWNTs by functionlization. This can improve effectively the dispersion uniformity of MWNTs in NMMO aqueous solution and is helpful to prepare a spinnable spinning dope. Moreover, the resultant MWNTs/Lyocell composite fibers still have cellulose II crystal structure, and their tensile strength and initial modulus increased with the increasing draw ratio and reached the optimal value with adding 1 wt% MWNTs. The thermal stability of the composite fiber was also improved by the addition of the MWNTs.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1651-1661
• /
• 2016

The purpose of this study is to draw up a plan for improving working conditions of distant water fishing vessel crew in order to revitalize the declining distant water fishing industry. Land-based employment has increased as the result of industrialization, which in turn created shortage in marine crew supply for distant water fishing vessels. Pressure on increasing wages for sea farers is put on the industry for this reason, making the labour market in the distant water fishing industry tougher and tighter. Multiple issues have yet to be addressed for distant water fishing vessel crew. They suffer from excessive work compared to other industries. Crew management is another issue, as sea farers face poor labour conditions, working on board vessels in a collective way where no autonomous actions are allowed. Other issues include unqualified crew supply, increasing ratio of labour costs for crew to sales, and intensified implications of labour unions, which are as well making crew supply difficult as a whole. To this end, more well-qualified workers should take part in production operations in the distant water fishery. Both wage increase and working condition improvement should be achieved in order to strengthen motivation towards qualified sea farers. Sustainable crew supply can be achieved when working environments, gender-based working conditions, welfare are prioritized and improved as a whole.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.54-60
• /
• 1997

The electrical and electromagnetic shielding properties have been investigated in polyaniline free standing films with different degrees of elongation cast from N-methyl 2-pyrrolidone(NMP) solution and camphorsulfonic acid(HCSA) doped polyaniline film. The degree of crystallinity of the crosslinked films increased with increasing the draw ratio. For the case of the oriented films doped with hydrochloric acid, we have the values of conductivities up to 173 S/cm. It is considered that the physical micro-crystalline crosslinking domains act as nucleation sites for the increase of relative crystallinity during stretching. We have obtained the value of conductivity 210 S/cm in the HCSA doped polyaniline film cast from the solvent of m-cresol, which is higher than that of the crosslinking oriented films. The electromagnetic shielding efficiency of HCSA doped polyaniline film obtained 37-41 dB in the frequency range of 10MHz-1GHlz, which is higher than that of the crosslinking oriented films. The higher value of electromagnetic shielding efficiency of HCSA doped polyaniline film suggests strong possibility of electromagnetic shielding material.