• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1317-1323
• /
• 2002

This paper describes the comparison of calculated effective stress with experimental one in austenitic heat resistant steels, STS310J1TB and STS310S with and without a small amount of Nb and N. Based on a solute atoms diffusion model, contribution from soluble nitrogen to the high-temperature strength was numerically examined for austenitic heat-resisting Fe-Cr-Ni-N(STS310J1TB) and Fe-Cr-Ni (STS310S) alloys. The solute atmosphere dragging stress of dislocation was calculated in optional dislocation velocity of STS310J1TB and STS310S at $650^{\circ}C$, $675^{\circ}C$ and $700^{\circ}C$. As a result of the numerical calculation, the solute atmosphere dragging stress of STS310J1TB was about 50 times larger than that of STS310S. When the temperature became high, the maximum value of solute atmosphere dragging stress was small and the velocity of moving dislocation was fast. From the relationship between the dislocation rate and the solute atmosphere dragging stress, the relation of both was proportional and the inclination is about 1 in the level with low velocity of moving dislocation. From above results, the mechanism of dislocation movement in STS310J1TB was the solute atmosphere dragging stress. The solute atmosphere dragging stress, which was calculated from the numerical calculation was close to the effect stress in stress relaxation tests.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.207-212
• /
• 1998

By comparison of the experimental results in two systems of ZnO varistors, it's appear that Sb2O3 is the indispensable element for twining in ZnO varistors and the Zn7Sb2O12 spinel acts as the nucleus to form twins. Al2O3 is not the origin of twining in ZnO varistor, but it was found that Al2O3 could strengthen the twining and form a deformation twining by ZnAl2O4 dragging and pinning effect. The inhibition ratios of grain and nonuniformity of two systems ZnO varistors increase with the increase of Al2O3 content. The twins affect the inhibition of grain growth, the mechanism could be explained follow as: twins increase the mobility viscosity of ZrO grain and grain boundary, and drag ZrO grain and liquid grain boundary during the sintering, then the grain growth is inhibited and the microstructure becomes more uniform.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1057-1060
• /
• 2001

By comparison of the experimental results in two systems of ZnO varistors, its appear that Sb$_2$O$_3$is the indispensable element for twinning in ZnO varistors, and the Zn$_{7}$Sb$_2$O$_{12}$ spinel acts as the nucleus to form twins. A1$_2$O$_3$is not the origin of twinning in ZnO varistor, but it was found that A1$_2$O$_3$could strengthen the twinning and form a deformation twinning by ZnA$_{12}$O$_4$-dragging and pinning effect. The inhibition ratios of grain growth and nonuniformity of two systems ZnO varistors increase with the increase of A1$_2$O$_3$content. The twins affect the inhibition of grain growth, the mechanism could be explained follow as : twins increase the mobility viscosity of ZnO grain and grain boundary, and drag ZnO grain and liquid grain boundary during the sintering, then the grain growth is inhibited, and the microstructure becomes more uniform.orm.m.

• 수산해양기술연구
• /
• 제58권3호
• /
• pp.230-240
• /
• 2022

In general, a high tension on the anchor and chain is placed when a ship at anchor is subjected to heavy weather. Mariners have to pay attention to whether dragging anchor occurs to keep the safety of the ship at anchorage since it is difficult to maintain the stable motion of ship and it causes collisions with other ships nearby. In this paper, the ship motion against the external forces was shown to obtain the fundamental data about characteristic of holding power due to nature of seabed at anchor, so practical trials were carried out in rocky area and muddy area using a trial ship around coastal area of South Korea. In muddy seabed, holding power showed reasonable tension values depending on the distance from anchor position of continuing swing motions of a ship corresponding to wind force. Meanwhile in rocky seabed, tension values on the chain appeared very high occasionally regardless of the distance from the anchor position and seemed to exceed its holding power to be the breaking strain of the chain although weather was not in a severe condition. Therefore, some of the cables laid on the seabed were presumed to be caught in a crack on the rock. It is assumed that even a small amount of external force may cause the chain to break in a moment in rocky seabed. Additionally, wind and current forces had a somewhat contradictory effect on holding power of the ship between them.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.209-215
• /
• 2016

In this study, the effect of Nb contents and processing parameters on dynamic recrystallization behaviour of 0.15C-0.2Si-0.5Mn low-carbon steels was investigated. Three kinds of steel specimens with different Nb contents were fabricated and then high-temperature compressive deformation test was conducted by varying reheating temperature (RT), deformation temperature (DT), and strain rate (SR). The Nb2 and Nb4 specimens containing Nb had smaller prior austenite grain size than the Nb0 specimens, presumably due to pinning effect by the formation of carbides and carbonitrides precipitates at austenite grain boundaries. The high-temperature compressive deformation test results showed that dynamic recrystallization behavior was suppressed in the specimens containing Nb as the strain rate increased and deformation temperature decreased because of pinning effect by precipitates, grain boundary dragging effects by solute atoms, although the compressive stress increased with increasing strain rate and decreasing deformation temperature.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2801-2808
• /
• 2022

The synergistic effect of ZrC nanoparticle pining and Re solution in W matrix on the thermal stability of tungsten was studied by investigating the evolution of the microstructure, hardness and tensile properties after annealing in a temperature range of 1000-1700 ℃. The results of metallography, electron backscatter diffraction pattern and Vickers micro-hardness indicate that the rolled W-1wt%Re-0.5 wt% ZrC alloy has a higher recrystallization temperature (1600 ℃-1700 ℃) than that of the rolled pure W (1200 ℃), W-0.5 wt%ZrC (1300 ℃), W-0.5 wt%HfC (1400-1500 ℃) and W-K-3wt%Re alloy fabricated by the same technology. The molecular dynamics simulation results indicated that solution Re atoms in W matrix can slow down the self-diffusion of W atoms and form dragging effect to delay the growth of W grain, moreover, the diffusion coefficient decrease with increasing Re content. In addition, the ZrC nanoparticles can pin the grain boundaries and dislocations effectively, preventing the recrystallization. Therefore, synergistic effect of solid solution Re element and dispersed ZrC nanoparticles significantly increase recrystallization temperature.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.535-541
• /
• 2016

The present study deals with the effects of micro-alloying elements such as Ni, V, and Ti on the recrystallization behavior of carbon steels at different strain rates. Eight steel specimens were fabricated by varying the chemical composition and reheating temperature; then, a high-temperature compressive deformation test was conducted in order to investigate the relationship of the microstructure and the recrystallization behavior. The specimens containing micro-alloying elements had smaller prior austenite grain sizes than those of the other specimens, presumably due to the pinning effect of the formation of carbonitrides and AlN precipitates at the austenite grain boundaries. The high-temperature compressive deformation test results indicate that dynamic recrystallization behavior was suppressed in the specimens with micro-alloying elements, particularly at increased strain rate, because of the pinning effect of precipitates, grain boundary dragging and lattice misfit effects of solute atoms, although the strength increased with increasing strain rate.

• 암석학회지
• /
• 제21권4호
• /
• pp.397-403
• /
• 2012

홍천 자은리에 분포하는 탄산염암류 기원의 철-희토류 광화대는 북부, 중부, 그리고 남부의 3개 광체가 남-북 방향으로 단속적으로 발달하고 있는데 지질구조 분석을 통해 이들의 분포와 연장특성을 파악하였다. 북부광체 및 중부광체 일대의 편마암에서의 엽리는 북북동 방향을 보이나, 광체의 남쪽으로 가면서 북동에서 동북동 방향으로 방향이 바뀌며 남부광체 부근에서는 다시 남-북 방향을 보이고 있다. 기하학적으로 분석되는 이 일대의 습곡은 자은교에서 새마을교 까지 북서쪽으로 오목하게, 완만하게 열린 습곡(open fold)으로 습곡축이 북서쪽으로 약 $45^{\circ}$ 침강하는 향사를 이루며, 새마을교 서측의 약수터 부근에서는 습곡축이 북서 방향으로 약 $45^{\circ}$ 침강하는 소규모의 배사를 이루고 있다. 이들 습곡은 약수터에서 새마을교 쪽으로 달리는 서북서 방향의 우수향 주향이동단층에 의해 단층끌림의 효과도 받은 것으로 추정된다. 엽리의 자세로 예측되는 습곡구조를 따라 일부 새로운 광체가 확인되므로 현재 충적층으로 피복되어져 있는 자은리 남쪽 지표상에서 미확인된 광체들이 중부와 남부 광체 사이에 엽리방향과 경사를 고려하면 거꾸로 된 기억자(ㄱ) 형태로 잠두하고 있을 것으로 추정된다. 이 지역에서 구조적으로 해석된 광체의 추정연장선 파악은 광체 확보를 위한 시추 위치 선정과 매장량 산정에 중요한 역할을 할 것으로 판단된다.

• 대한한방부인과학회지
• /
• 제20권4호
• /
• pp.225-233
• /
• 2007

Purpose: The purpose of this study Is to report the effect of Paljeongsangami(八正散加味) on the female urethral syndrome(FUS). Methods: A subject was a 29-year-old woman who suffered from FUS even after the treatment of western medicine. We evaluated the routine blood test. U/A, Pap smear and N.gonorrhoeae PCR, but there were no abnormal findings. We gave her Paljeongsangami 3 times a day for 10 days with acupuncture and moxibustion. During the treatment, we asked her complete a urinary dairy. Results: After the treatment, the symptoms of FUS was disappeared and her condition was maintained for 2 months at least. Conclusion: This case report showed that Paljeongsangami is efficacious for FUS and could prevent chronic progress and relapse of symptoms. More clinical data and studies are to be done for the effective application of the various oriental medicinal therapy on FUS.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 2008년도 Proceedings of the Convention
• /
• pp.103-115
• /
• 2008

Hemodynamic shear stress, the dragging force generated by blood flow, is known as an anti-atherogenic factor. We tested whether lysyl-tRNA synthetase (KRS) will be utilized as an agent controlling shear-sensing systems. KRS was previously known to be secreted as a pro-inflammatory agent. Here we found that KRS inhibited various shear-stimulated signaling pathways. We further found that KRS binds to detergent-resistant membrane (DRM), indicating that KRS binding molecules exist in DRM, specialized regions of the plasma membrane. DRM plays important roles in a variety of cellular processes and consists of gangliosides, signaling molecules and cytoskeletons. We then determined that KRS was colocalized with integrins ${\alpha}4$, ${\alpha}5$ and $av{\beta}3$. In addition, KRS was shown to be associated with sialic acid, existing at the end of gangliosides. Interestingly, the adherent effect of KRS was inhibited by pretreatment with sialic acid. Moreover, treatment of endothelial cells with neuraminidase appeared to inhibit both the KRS adhesion to endothelial cells and shear-stimulated signaling. In conclusion, KRS is likely to be utilized as a vascular regulator.