• Wind and Structures
• /
• 제30권2호
• /
• pp.141-153
• /
• 2020

Probabilistic information regarding directional extreme wind speeds is important for the precise estimation of the design wind loads on structures. A joint probability distribution model of directional extreme typhoon wind speeds is established using Monte Carlo simulation and empirical copula function to fully consider the correlations of extreme typhoon wind speeds among the different directions. With this model, a procedure for estimating directional extreme wind speeds for given return periods, which ensures that the overall risk is distributed uniformly by direction, is established. Taking 5 typhoon-prone cities in China as examples, the directional extreme typhoon wind speeds for given return periods estimated by the present method are compared with those estimated by the method proposed by Cook and Miller (1999). Two types of directional factors are obtained based on Cook and Miller (1999) and the UK standard's drafting committee (Standard B, 1997), and the directional risks for the given overall risks are discussed. The influences of the extreme wind speed correlations in the different directions and the simulated typhoon wind speed sample sizes on the estimated extreme wind speeds for a given return period are also discussed.

• 한국의류학회지
• /
• 제9권3호
• /
• pp.17-26
• /
• 1985

The purpose of this study is to develop a bodice pattern drafting method for Korean elderly women over sixty years old on the basis of their physical characteristics which differ from those of adult women. The study is composed as follows; 1. One hundred and five elderly women were measured on 20 items. Twenty-five items including 20 measured items and 5 calculated items were analyzed statistically. 2. A new method was developed based on the results of data analysis. Basic shells constructed from the patterns were examined through three fitting tests for completion. 3. The sensory evaluation was applied to evaluate the new pattern for elderly women by comparing it with the conventional pattern for adult women. A five-point rating scale was developed for the evaluation. According to a statistical analysis of the result of the 20 items on the questionnaire, all the items showed significant differences (a$\leqq$0.01) between the two, with the new pattern having higher scores.

• 복식문화연구
• /
• 제29권3호
• /
• pp.346-360
• /
• 2021

Universities have recently introduced problem-based learning (PBL) to various subjects to enhance problem-solving skills (including self-directed learning and small-group learning) required in industry. The PBL module was applied to the personal production process in a draping class. A study was based on a questionnaire after conducting two PBL modules with a group of students. Each PBL module included 'design analysis', 'presentation of flat sketch and draping plan', 'discussion of the plan', 'evaluation of the draping result and correcting the problem', and 'final evaluation of the completed project'. Results showed that satisfaction with the PBL method and its activities was higher than satisfaction with existing teaching methods. In particular, among the various components, the 'design analysis' and 'the presentation step of flat sketch and draping plan' stages were more helpful to students compared to small-group discussion. Moreover, the effects of PBL were observed through student reflection essays, in which students suggested that PBL was very effective in enhancing problem-solving through self-directed and small-group learning. Despite the overall satisfaction with PBL, students expressed some minor difficulties associated with awkwardness with a novel learning method, lack of diverse perspectives among each group, and poor communication skills. Therefore, the study shows that PBL is highly likely to be useful to students when they are solving pattern drafting problems and making samples through self-directed learning and small-group learning.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.690-703
• /
• 2018

The purpose of this study is to help user understand the basic principles and interfaces of each program, and to provide a base material for the development of more efficient apparel CAD systems to compensate for each program's shortcomings by comparing the function of three apparel CAD systems: Yuka CAD, Opti-tex, and Style CAD. For this purpose, the skirt waistband and sleeve armhole line creation process were selected based on these two criteria. 1) There is a big difference between principle and method between CAD systems. 2) When CAD system is used rather than paper drawing process, the process is shortened and convenience is high. In this study, pros and cons and supplement point of each CAD system are suggested by comparing the functions of the CAD system performing the selected drafting process by four criteria: icon, key, method, and characteristic point. As a result of the study, it was confirmed that the three CAD systems differ in the basic principle and interface environment. As a result of analyzing the skirt waistband method function, it was confirmed that the band line is formed directly on the outline of the skirt and the band dart recognition function is the most efficient function and as a result of the analyzing the sleeve armhole line method function, it was confirmed that the curve generation function using the shape of the actual curve measure and the length adjustment function through the automation of the dimension calculation is the most efficient function.

• 한국전통조경학회지
• /
• 제29권2호
• /
• pp.108-117
• /
• 2011

현재 현상변경 기준안 작성 시 일률적인 규제방식으로 영향검토구역 내의 문화재 이격거리 확보에 국한하여 높이(층수)규제만을 제한적으로 적용하고 있는데, 이는 문화재 왜소화 현상과 주변 경관에 대한 부정적인 영향을 미치고 있어 현상변경 허용기준 안 작성 시 발생될 수 있는 객관성 결여에 대한 보완책이 시급한 상황이다. 본 연구는 대상 문화재 및 주변 환경을 고려한 종합적인 가시율 전산모의분석을 통해 객관적이고 합리적인 현상변경 규제방안 의사결정을 위한 분석 방법을 제공하고자 한다. 이를 위해 천안시에 소재한 문화재 중 건축물 또는 인공구조물 밀집지역으로 현상변경 허가 시 문화재 왜소화 현상이 예상되는 대상지, 자연 지형 지물의 영향이 건축물 또는 인공구조물에 비해 상대적으로 적은 대상지, 영향검토구역 내에 현상변경 기준이 확립되지 않아 새로운 제도의 도입이 가능한 대상지의 조건에 충족하는 천흥사지 당간지주와 직산현관아를 선정하여 다중관찰자 시점을 중심으로 문화재와 주변 경관에 대한 포괄적인 조망권 설정을 위해 정량적인 가시율 분석을 진행하였다.

• 한국컴퓨터정보학회논문지
• /
• 제27권4호
• /
• pp.79-88
• /
• 2022

본 연구는 20대 비만 여성에게 적합한 보디스 원형 개발을 위해 프랑스, 일본 패션교육기관의 원형과 우리나라 교육용 원형 1개, 우리나라 산업체용 원형 2개 등 총 5개 패턴 제도법을 비교·분석하였다. 이를 통해 플러스 사이즈 여성 의복 개발에 적합한 보디스 원형 패턴 제도법을 알아보고자 하였다. 패턴제도를 위해 패턴1은 앞품, 뒤품, 젖가슴둘레, 목둘레, 등길이 등 가장 많은 신체치수를 적용하였고, 패턴2, 패턴4, 패턴5는 젖가슴둘레, 등길이를 기준으로 모든 패턴을 제작하였다. 외관평가 결과, 패턴3이 앞중심길이의 적합성, 옆허리둘레선 위치의 적합성 항목을 제외하고 모든 항목에서 가장 우수한 패턴으로 평가되었다. 그러나 옆선의 수직, 옆허리둘레선 위치의 적합성, 뒤진동둘레 위치 및 형태의 적합성, 뒤어깨다트 위치의 적합성 등의 항목에서는 부적합한 것으로 평가되었다. 보디스 원형은 젖가슴둘레 치수를 기준으로 대부분의 패턴 제도가 이루어지나 비만 여성의 경우 목둘레 설정, 어깨길이 설정에 있어서는 다른 제도법이 필요할 것으로 생각된다. 또, 복부 돌출로 앞중심길이 설정 방법에 대한 개발도 요구되었다.

• 한국의류산업학회지
• /
• 제7권2호
• /
• pp.225-230
• /
• 2005

This research was undertaken to compare basic bodice prototypes for Internet shopping customer, and to select a profitable fit vacant space quantity between clothing and body. A total one hundred of eighteen outfits (4 types of pattern ${\times}$ 9 subjects ${\times}$5 body areas) were constructed with basic bodice drafting method of Japan Bunka Women's University according to nine male body types. Fifty-two experts analysis of the different prototypes as five body area and evaluate the most appropriate ease amount and stabilization of the simulation images on the computer. The experiments with automated methods using simulation image are based on AZ program of TORAY, Japan. Data was analyzed using percentiles, frequency and $X^2$. Taken together, the present result of vacant space quantity and stability evaluation through images shows that there is a significant difference in the size variation of the chest circumference, shoulder slope and waist circumference. In case of ease amount, chest area, shoulder slope, waist area and armhole except neckline area were shown more appropriate on the basic bodice pattern without size change. In case of stabilization, the chest area, shoulder slope and armhole except waist area and neckline area was shown the best on the basic bodice pattern without size change. However the waist area was shown on the basic bodice pattern plus 2 cm, neckline was shown more appropriate on the basic bodice pattern plus 1cm.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.911-923
• /
• 1995

The zone of expansion and contraction of arm surfaces was analyzed, the correlation between arm surface changes was studied, and ergonomic sleeve designs were presented in which the consideration of body surface changes is emphasized. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are as follows : 1. As a sleeve drafting method, detailed measures should be applied on the base of the sensitivity of body surface changes. The range of arm surface changes can be divided into three zones : concentrated expansion zone, zone of little change, and contraction part. The maximum expansion zone was the upper part of elbow. 2. The correlations were higher in lengths than in circumferences. Arm lengths were mainly correlated with upper arms. The more detailed the arm surface was, the lower the correlations between surface changes were. So there was not a lot of relation between segment changes. Tendency of body surface changes depended on the anatomical structure of the upper extremity and the movements of arm muscles. 3. As an application of measures and ease, ergonomic sleeve designs weve presented in which arm surface changes were considered. Ergonomic sleeve designs are recommended for working clothes and sports wear.

• 무역상무연구
• /
• 제54권
• /
• pp.3-44
• /
• 2012

Shipbuilding industry is one of the most influential ones in Korea. As shipbuilding industry is labor-intensive, it contributes to enhancing both local economy and national economy. Shipbuilding industry has been downsizing since the end of 2008 due to global financial crisis caused by America's sub-prime mortgage and aggravated by European countries' fiscal deficit. As a large fund is required for a single normal shipbuilding contract, fund raising is one of the most important elements in shipbuilding contract. Shipbuilding contract, requires refund guarantee in order for a buyer to reimburse the progressive payment paid to a builder. The disputes under shipbuilding contracts are mostly settled by arbitration rather than by law suit. English laws and English courts have been preferred for the choice of law as well as for the choice of forum. Due to depreciation of the ship value since the end of 2008, a number of buyers are trying to cancel the contract by raising unjust claim under the contract. Once disputes occurs regarding shipbuilding contract, a large amount of loss is inevitable. In order to mitigate the disputes arising from the shipbuilding contract, careful caution is required in drafting a shipbuilding contract.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.647-654
• /
• 1985

본 논문에서는 미소한 비대칭 요소를 갖는 축대칭 셸구조물(종형구조물 또는 용접된 압력용기등)의 전산기 이용 도면입력/수정/출력, 체적특성치의 자동결정, 근사 고속 유한요소해석 및 출력을 시각화하는 일관 작업을 수행할 수 있는 전산기이용설계 알고리즘을 개발하고 생산가공에 대한 공리적 접근방법을 전산화하는 전산기이용 공정 계획 알고리즘에 대한 기초적인 연구를 행하였다.