• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.408-412
• /
• 2018

In this paper, a 26GHz variable gain amplifier fabricated using a 40nm CMOS process is studied. In the case of an automobile radar using 79 GHz, it is advantageous in designing and driving to drive down to a low frequency band or to use a low frequency band before up conversion rather than designing and matching the entire circuit to 79 GHz in terms of frequency characteristics. In the case of a Phased Array System that uses time delay through TTD (True Time Delay) in practice, down conversion to a lower frequency is advantageous in realizing a real time delay and reducing errors. For a VGA (Variable Gain Amplifier) operating in the 26GHz frequency band that is 1/3 of the frequency of 79GHz, VDD : 1V, Bias 0.95V, S11 is designed to be <-9.8dB (Mea. High gain mode) and S22 < (Mea. high gain mode), Gain: 2.69dB (Mea. high gain mode), and P1dB: -15 dBm (Mea. high gain mode). In low gain mode, S11 is <-3.3dB (Mea. Low gain mode), S22 <-8.6dB (Mea. low gain mode), Gain: 0dB (Mea. low gain mode), P1dB: -21dBm (Mea. Low gain mode).

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.355-360
• /
• 2018

$LuNbO_4:0.2Yb^{3+},xTm^{3+}$ powders were prepared using a solid-state reaction process. The effects of the amount of Tm on up-conversion(UC) and down-conversion(DC) luminescence properties are investigated. X-ray diffraction patterns confirm that $Yb^{3+}$ and $Tm^{3+}$ ions are successfully incorporated into Lu sites. Under 980 nm excitation, the UC spectra of the powders predominantly exhibit strong near-infrared emission bands that peak at 805 nm, whereas weak 480 nm emission bands are observed as well. The emission bands are assigned to the $^1G_4{\rightarrow}^3H_6$ (480 nm) and 3 $^3H_4{\rightarrow}^3H_6$ (805 nm) transitions of the $Tm^{3+}$ ions via an energy transfer from $Yb^{3+}$ to $Tm^{3+}$; two- and three-photon UC processes are responsible for the 805 and 480 nm emissions, respectively. The DC emission spectra exhibit blue emission ($^1D_2{\rightarrow}^3F_4$) of $Tm^{3+}$ at 458 nm. The amount of Tm affects the emission intensity with the strongest emissions at x = 0.007 and 0.02 for the UC and DC luminescence, respectively. The results demonstrate that $LuNbO_4:Yb^{3+},Tm^{3+}$ phosphors are suitable for bio-applications.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.9-18
• /
• 1998

A single RF transceiver chip for an extended GSM handset application was designedm, fabricated and evaluated. A RFIC was fabricated by using silicon BiCMOS process, and then packaged in 80 pin TQFP of $10 {\times} 10 mm^{2}$ in size. As a result, it was achieved guite reasonable integraty and good RF performance at the operation voltage of 3.3V. This paper describes development results of RF receiver section of the RFIC, which includes LNA, down conversion mixer, AGC, switched capacitor filter and down sampling mixer. The test results show that RF receiver section is well operated within frequency range of 925 ~960 MHz, which is defined on the extended GSM specification (E-GSM). The receiver section also reveals moderate power consumption of 67 mA and minimum detectable signal of -105 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.189-193
• /
• 2005

In this paper, we propose a direct conversion double-balanced down-converter fer MB-OFDM W system, which is implemented using $0.18\;{\mu}m$ CMOS technology and its measurement results are shown. The proposed down-converter adopts a resistive current-source instead of general transconductance stage using MOS transistor to achieve wideband characteristics over RF input frequency band $3\~5\;GHz$ with good gain flatness. The measured conversion gain is more than +3 dB, and gain flatness is less than 3 dB for three UWB channels. The dc consumption of this work is only 0.89 mA from 1.8 V power supply, leading to the low-power W application.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.11-17
• /
• 2010

Multi-standard, multi-band, multi-service system to ensure a flexible interface between the SDR (Software Defined Radio) technology for the implementation of the Stability and Low-Power, Low-Calcualrion DDC (Digital Down Conversion) technology is essential. DDC technology consists of a digital channel filter. This is a typical digital filter because of the limited fisheries are vulnerable to overflow and rounding errors are drawbacks. In this paper, we overcome this disadvantage, we propose the structure of the DDC. The way WDF (Wave Digital Filter) Structural rounding error due to the structural resistance to noise. Therefore, This is the useful structure when the filter coefficients's word length is short. In addition, since IIR filters based on FIR filters based on the amount of computation is reduced because fewer than filter's tap. The proposed structure is used in DDC that CIC (Cascaded Integrator Comb) filter, WDF, IFOP (Interpolated Fourth-Order Polynomials) were analyzed with respect to, the results were confirmed by computer simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.685-689
• /
• 2016

Synthesis of the fluorescent Au nanoclusters is reported. The Au nanoclusters were synthesized via reduction of gold ions in reverse micelles with mild reducing agents. The Au nanoclusters show a bright red emission at 640 nm. The fluorescent Au nanoclusters attract great interest for sensor, electronic device and bio-imaging applications because of ultra-small size, high chemical stablity and bright emission. We believe that the fluorescent Au nanoclusters can have optoelectronic applications such as optical down conversion phosphors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.22-28
• /
• 1983

In former papers which were published already, authors had derived calculation formulae for the axial stiffness and the radial force conversion factor of crankshaft. In this paper, crankthrow axial stiffness and radial force conversion factors of actual engines are calculated by these theoretical formulae and then their characteristics are investigated. As the results, the axial stiffness and the radial force conversion factor of the latest super-long stroke engine are smaller than those of old-type engines. The influence of the former brings down the resonance speed of engine and the latter reduces the exciting force of axial vibration, but as the harmonic component of axial vibration force becomes rather strong, its effect of reducing is considerably canceled. In conclusion, as the latest super-long stroke engine is seemed to be liable to axial vibration of crankshafat, it is recommend that, in the design stage of propulsion shaft, its axial vibration condition must be more carefully checked.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.153-159
• /
• 2009

A CMOS frequency synthesizer for $5{\sim}6$ GHz UNII-band sub-harmonic direct-conversion receiver has been developed. For quadrature down-conversion with sub-harmonic mixing, octa-phase local oscillator (LO) signals are generated by an integer-N type phase-locked loop (PLL) frequency synthesizer. The complex timing issue of feedback divider of the PLL with large division ratio is solved by using multimodulus prescaler. Phase noise of the local oscillator signal is improved by employing the ring-type LC-tank oscillator and switching its tail current source. Implemented in a $0.18{\mu}m$ CMOS technology, the phase noise of the LO signal is lower than -80 dBc/Hz and -113 dBc/Hz at 100 kHz and 1MHz offset, respect-tively. The measured reference spur is lower than -70 dBc and the power consumption is 40 m W from a 1.8 V supply voltage.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.28-33
• /
• 1997

For the Evaluation of X-ray image intensifier, we measured radiation dose at input of I. I., brightness and fluorescence at output of I. I. by using X-ray exposure meter, optometer and fluorescence meter for the relative conversion factor. Especially, by using fluorescence meter, we could easily get relative conversion factor without having regulated machine by JIS. Since using, the quality of image intensifier is going down. Consequently, it needs continuous quality maintenance.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.56-60
• /
• 2017

This paper describes the design and implementation of fall-down detection algorithm based on image processing. The fall-down detection algorithm separates objects by using background subtraction and binarization after grayscale conversion of the input image acquired by the camera, and recognizes the human body by using labeling operation. The recognized human body can be monitored on the display image, and an alarm is generated when fall-down is detected. By using computer simulation, the proposed algorithm has shown a detection rate of 90%. We verify the feasibility of the proposed system by verifying the function by using the prototype test implemented on the DSP image processing board.