• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.450-453
• /
• 1995

The beam rotating actuator, which can be utilized to improve the data transfer rate for the optical disk systems, has been developed. It can employ a newly developed laser beam rotating actuator for putting multi-beam spots on more than one track on the optical disk simultaneously. Therefore, It has to maintain up to .+-.0.01 .deg. resolution and high bandwidth performance. In this these, the Dove prism is used for the beam rotating actuator based on bimorph piezo material. The performance of the beam rotating actuator is verified since the dynamics ferquency performance is measured using the dynamic analyzer and the attached stain gage sensor. the beam rotating angle performance is also examined since the long range beam reflection character is utilized.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.27-31
• /
• 1994

Intravascular ultrasound images of coranary artery contain very important informations on heart disease. The intimal contours on the image show informations and data to examine intravascular problems of patients. A new computation algorithm to detect the intimal and adventitial contours from the intravascular images was developed. An Image processing on gray level image was used. It uses arrays of pixels in each radial lines on the images. A "Robert" filter was adopted at first step for one dimensional image processing. Some other calculation techniques were developed to inclose the accuracy of automatically detected contours. The standard contour data to compare with automatically detected contour data were obtained through manually tracing by experienced cardiological medical doctors. The result of the new algorithm shows high accuracy of 80 % matching with the standard contour data.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.495-502
• /
• 2001

Upright positioning of garlic cloves has been considered as an essential process for mechanical planting because positioning affects the quality and yield of garlic production. Due to the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual. Manual planting requires intensive labors and high production cost. The overall Boal of this research was to develop a garlic clove planter which maintains a garlic clone upright. Specific objective was investigating planting condition and physical properties of garlic clove. The results were summarized as fellows : Based on the survey results, a garlic clove planter should have a planting capacity of at least 140 cloves in a pyung (3.3m$^2$) with the row spacing of 140mm and hill spacing of 120mm for a productive cultivation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.2
• /
• pp.135-141
• /
• 1990

Two experiments were conducted to determine the validity of the deuterium oxide ($D_2O$) dilution method to estimate milk intake by pigs. A total of 39 piglets weaned from their dams 24 - 36 hours after birth and trained to drink from artificial nipples, were used for two experiments. Estimates of milk replacer consumption of individual piglets over 1, 3, 5 and 7 days were made by the $D_2O$ dilution method and by dissappearance. Milk intakes estimated by this $D_2O$ dilution method were significantly correlated ($R^2$ = 0.98-0.99) with milk intake measured by disappearance. The average difference between estimates by disappearance and estimates by the $D_2O$ dilution method were -1%, +0.5%, +0.5% and -2.1% for measurement period of 1, 3, 5 and 7 days respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.2
• /
• pp.143-148
• /
• 1990

An experiment was conducted to compare the traditional weigh-suckle-weigh method and the $D_2O$ dilution technique to estimate milk consumption of suckling piglets. Milk consumption of 50 individual piglets was estimated on four consecutive days by the $D_2O$ dilution method and for approximately 8 hours on both the second and fourth day by the traditional WSW method. The average milk intake of piglets estimated by the $D_2O$ dilution method was 45.0 g/hr and there were no significant differences between the four measurement period. The traditional weigh-suckle-weigh method provided a significantly lower estimate of milk consumption (36.8 g/hr). However correction for weight losses associated with milk suckling and weighing would increase the weigh-suckle-weigh estimate to a level similar to that determined by the $D_2O$ dilution method.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.834-838
• /
• 2003

Vibration of turbine is concerned with array of last moving blade at lower pressure turbine. When last moving blade at lower pressure turbine was replaced, we must consider mass unbalance problems of blades. If mass unbalance happened at rotor, it is impossible to operate turbine. In this paper, we have how to minimize the mass unbalance problems of last moving blade at lower pressure turbine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1072-1075
• /
• 1997

To enhance the effective data transfer rate the multi-beam optical disk drive is presented. The Beam rotating actuator is necessary for putting multi-beam on more than one track. Ray tracing was also executed for real system set-up. The Beam Rotating Actuator is made up of piezoelectric material, high stiffness wire hinge and dove prism. The actuator has about 1kHz natural frequency and suitable and suitable operational range. The dynamic equation for the actuator is derived for the control of real system.

• Laser Solutions
• /
• v.10 no.3
• /
• pp.11-14
• /
• 2007

A trepanning optics is the optical system which makes focus laser beam rotate and incline to the material processing surface. The trepanning optics is used in order to improve the quality of laser drilling process and control the taper of drilling diameter. In order to make trepanning optics, we can use the eccentricity of lens, scanner using two mirror, dove prism, or wedge. Among these method, in this paper wedge is used for trepanning optics. The wedge trepanning optics has advantage on the high speed of rotation. In this paper, we design the wedge trepanning optics using ray tracing. ements and engine design variables of system to satisfy the customer's requirements.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.91-94
• /
• 1997

In this paper, pseudo-random ternary sequence (PRTS) was used to investigate the cardiovascular and respiratory responses to hypoxia and hypercapnia. The actual input or this study was the changes in inhaled oxygen and carbon dioxide concentrations. It is hard to randomly change the concentration within a given breath. Since PRTS has almost the same statistical properties as Gaussian white noise, plus it is physically realizable, PRTS is used for this study. Using PRTS and Volterra kernels by Gram-Schmidt orthogonalization procedure, the cardiovascular and respiratory responses to hypoxia and hypercapnia were analyzed.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.299-304
• /
• 2003

Manufacturing companies must possess a new type of production system with characteristics of reconfigurability, reusability and scalability (Dove 1995), i.e. an agile manufacturing system. Such system will allow flexibility not only in producing a variety of part, but also in changing the system itself, which is a difference form flexible manufacturing systems. A fundamental early step in the reconfiguring process for agile manufacturing system is to develop a model that adequately describes the proposed systems, in order to be able to study and evaluate the impact of the reconfiguring decision on the system performance, before its construction. Therefore, in this paper, an Object & Knowledge-based Interval Timed Petri-Net (OKITPN) approach is proposed.