• Composites Research
• /
• 제32권2호
• /
• pp.102-107
• /
• 2019

Several studies related to reinforce composites structures in the through thickness direction have been developed along the years. As follows, in this study a new reinforced process is proposed based on previous experimental results using a novel stitching process in T-joints and one-stitched specimens. It was established the need to perform more analysis under standard test methods to obtain a better understanding. FEM analysis were compared after performed mode I interlaminar fracture toughness test, using different stitching patterns to analyze the through thickness strength with reference laminates without stitching. The stitching patterns were defined in $2{\times}2$ and $3{\times}3$, where the upper and lower head of the non-continuous stitching process (I-Fiber) has proven to influence in a higher through thickness strength of the laminate. In order to design the numerical model, cohesive parameters were required to define the surface to surface bonding elements using the cohesive zone method (CZM) and simulate the crack opening behavior from the double cantilever beam (DCB) test.

• 한국멀티미디어학회논문지
• /
• 제17권10호
• /
• pp.1205-1212
• /
• 2014

In this paper, we propose a high-quality stitching method of 3D multiple dental CT images. First, a weighted function is generated using the difference of two distance functions that calculate a distance from the nearest edge of an overlapped region to each position. And a blending ratio propagation function for two gradient vectors is parameterized by the difference and magnitude of gradient vectors that is also applied by the weighted function. When the blending ratio is propagated, an improved region growing scheme is proposed to decide the next position and calculate the blending intensity. The proposed method produces a high-quality stitching image. Our method removes the seam artifact caused by the mean intensity difference between images and vignetting effect. And it removes double edges caused by local misalignment. Experimental results showed that the proposed method produced high-quality stitching images for ten patients. Our stitching method could be usefully applied into the stitching of 3D or 2D multiple images.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.927-934
• /
• 2014

Today Hanbok, the symbol of our nation's culture, has been preserved as cultural heritage despite natural and social environmental changes over years. This study is analyzing Hanbok which were taken in the National Skills Competition from 2000 to 2013; it presents our traditional stitching methods and clarifies the pride the Hanbok artisans have as inheriting the traditional heritage. Therefore this paper contributes to continuous and proper development of the culture of Hanbok and being loved by many people. The assignments about Hanbok featured in the National Skills Competition were categorized by national and local competition, time required to produce assignments, required amount of fabric, type of stitching, unlined and lined clothes depending on the type of assignment; according to the classification, methods for sewing were analyzed in detail. First, the national tournament presented 12 kinds of sewing techniques; especially hand-sewn stitching method appeared in common. Second, the unlined and lined clothes depending on the type of assignments had applied different sewing methods; double-stitching, flat fell seam, french seam, roll over sewing, blind stitch, right angle blind stitch, decorative saddle stitching, darning, etc. were used. Sewing methods in the 21st century has not changed over the years; the shape of clothes was changed upon trends. Sewing became easier than before by the invention of sewing machine, we should carry on our traditional sewing techniques. Through this analysis on sewing methods of the National Skills Competition, I hope to support competition participants for studying Hanbok and indicate proper sewing techniques.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.567-577
• /
• 2005

Several methods for improving the interlaminar strength and fracture toughness of composite materials are developed. Through-the-thickness stitching is considered one of the most common ways to prevent delamination. Stitching significantly increases the Mode I fracture toughness and moderately improves the Mode II fracture toughness. An analytical model has been developed for simulating the behavior of stitched double cantilever beam specimen under various loading conditions. For z-directional load and moment about the y-axis the numerical solutions are compared with the exact solutions. The derived formulation shows good accuracy when the relative error of displacement and rotation between numerical and exact solution were calculated. Thus we can use the present model with confidence in analyzing other problems involving stitched beams.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.92-99
• /
• 2000

Composites are very useful material for light train carbody due to its high specific strength and lightweight characteristics. The composites, called 3-D board, are developed with a special stitching method. In this process, the glass fiber fabrics of skin material and foam core material are stitched together with glass fiber thread. The glass thread in Z-axis turns into FRP form. The conventional delamination problem can be solved with 3-D sandwich structure. In addition, with the lower density of foam, the weight of the panel and the operation expenses can be highly reduced. To evaluate the usefulness of the 3-D board, the double-deck light train carbody is studied. The stress analyses are carried out under various loads and boundary conditions with FEM Code, ANSYS. On comparing with the aluminum carbody, 3-D board carbody can be reduced by about 2 ton for the total weight of carbody.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.107-114
• /
• 2017

In this investigation, we describe a metrological technique for surface and thickness profiles of a silicon (Si) wafer by using a 6 degree of freedom (DOF) stitching method. Low coherence scanning interferometry employing near infrared light, partially transparent to a Si wafer, is adopted to simultaneously measure the surface and thickness profiles of the wafer. For the large field of view, a stitching method of the sub-aperture measurement is added to the measurement system; also, 6 DOF parameters, including the lateral positioning errors and the rotational error, are considered. In the experiment, surface profiles of a double-sided polished wafer with a 100 mm diameter were measured with the sub-aperture of an 18 mm diameter at $10\times10$ locations and the surface profiles of both sides were stitched with the sub-aperture maps. As a result, the nominal thickness of the wafer was $483.2{\mu}m$ and the calculated PV values of both surfaces were $16.57{\mu}m$ and $17.12{\mu}m$, respectively.

• 한국광학회지
• /
• 제32권6호
• /
• pp.314-322
• /
• 2021

일반적인 반사식 망원경은 오목 형태의 주경과 볼록 형태의 부경으로 구성되어 있다. 주경은 크기가 크지만 빛을 모아주는 특성으로 반사경의 파면오차 측정이 비교적 용이하다. 반면에 부경은 빛을 퍼트리기 때문에 주경보다 크기는 작지만 측정의 난이도는 더 높다고 할 수 있다. 특히 코시(Korsch) 형태의 망원경에서는 부경의 가운데 영역도 사용하는데 기존의 힌들(Hindle) 측정법으로는 가운데 부분을 측정할 수 없다. 본 논문에서는 크기가 큰 볼록비구면을 측정하기 위해 힌들 정합법(힌들 측정법과 정합법의 결합)을 적용하여 측정하고 이 측정에서 빠지는 가운데 영역은 일반간섭계의 구면파를 이용해 측정하여 두 결과를 합쳐 전체 형상 오차를 획득하는 방법을 제안하고자 한다. 제안한 방법으로 직경 202 mm, 곡률 반경 499 mm, 비구면상수 -4.613의 볼록 비구면의 형상 오차를 측정한 결과 19.5±1.3 nm rms로 측정되었다. 이 결과는 상용 정합 측정 장비로 측정한 결과와 0.7 nm rms의 근소한 차이를 보였고 반사경의 형상 오차가 45도 방향 비점수차를 가지는 것것도 일치하였다. 따라서 본 논문에서 제안한 방법이 볼록 비구면의 전체 영역을 정밀하게 측정하는데 유용함을 알 수 있었다.

• 한국광학회지
• /
• 제20권1호
• /
• pp.23-28
• /
• 2009

본 논문에서는 대면적 리소그래피를 위하여 홀로그램 영상을 연결하여 기록 물질에 저장하고 이를 마스크로 이용하는 노광 방법을 제안하고 구현하였으며, 홀로그램 영상을 재생하는 과정에서 발생되는 영상 연결 부분에서의 간섭 무늬를 제거하였다. 연결하고자 하는 영상은 DMD(digital micro-mirror device)로 표시하였으며, DMD 영상은 축소 광학계를 통하여 기록 물질에 저장되었다. 기록 물질은 전동 스테이지로 이동되도록 하여, DMD로 표시되는 영상이 기록 물질에 연속적으로 저장되도록 하였다. 이러한 방법으로 저장되는 연결된 영상은 재생광에 의하여 노광에 사용되는데, 재생광의 간섭성에 의하여 연결부분에 간섭무늬가 발생된다. 간섭무늬는 노이즈로 작용하는데, 다중 노광에 의한 홀로그램 영상의 기록과 재생을 이용하여 이를 제거하였다. 본 논문에서는 DMD와 전동 스테이지를 이용하여 영상을 연결하여 기록하고, 다중 노광에 의한 영상 기록 방법을 이용하여, 간섭 무늬가 제거된 연결된 영상을 구현하고 이를 리소그래피에 적용하였다.

• 복식
• /
• 제59권9호
• /
• pp.26-42
• /
• 2009

The purpose of this study is to examine how to sew the hem of men's coat which were excavated from the Yeosan Song Clan's tombs that are thought to be formed between the late 15th and the late 16th centuries, findings of the study can be summarized as follows. 1. Andan, or inside facing was used to prevent the hem from being worn or swollen or to make the hem properly arranged. It was generally used for single-layered and cotton-quilted coat for men. Deotdan was used mainly for men's coat having oblique cutting lines and jemuldan for those having straight cutting lines. In single-layed coat for men, the width of andan was widened a little as the times moved from the late 15th to the late 16th century, but in cotton-quilted ones, the width was not significantly changed. 2. Fixing the lining and the upper was used as a method to prevent the lining of men's coat from being pushed out or the hem of the clothes from being swollen. The method was generally used for double-layered, cotton and cotton-quilted coat for men. The double back-stitching was usually used for double-layered and cotton coat for men and the broad-stitching for Cotton-quilted ones. 3. Among men's coat, those whose siding was partially opened were less spare in the lower end than those whose siding was wholly opened. For this reason, the former clothes were more likely to have the tip of the siding easily torn. To solve this problem, overhand knotting 1, overhand knotting 2 and lotus-flower knotting strings were used for men's coat whose siding was partially opened. Among the three types, lotus-flower knotting was most elaborate in form. For men's coat, overhand knotting became gradually replaced by lotus-flower knotting as the times moved from the late 15th to the late 16th century.

• 복식문화연구
• /
• 제19권4호
• /
• pp.751-765
• /
• 2011

The purpose of this study is to apply the Trencadis images in Antony Gaudi's work to a design motive and thus provide a new concept for a knitwear design by combining double-knitted fabrics with patchwork applique, taping, stitching and quilting. This study examines the bibliographic text and precedent research related to Antony Gaudi and his works, and analyzes the historical background and formative and stylistic characteristics of Trencadis as it appeared in Gaudi's architectural works. Also this study also examines the characteristics of knitwear and knitting theory while exploring the formative elements and the combined techniques used in modern knitwear design through fashion magazines, medium images, and online sources. The results are as follows: First, Gaudi's work that applies a Trencadis technique has the characteristic of being creative, organic, and environmentally friendly. And in addition, its colorfulness inspires modern fashion design. Second, computerized knitting has been practiced in various ways and the fabrics knitted by both double-knitting jacquard and computerized knitting machines provide a new direction the creation of knitwear. A computerized knitting machine is especially effective for pictorial expression, and is suitable for showing the natural curve of the human body due to its sophistication. Third, as a result of applying a combined technique to the knitting of various fabrics, a combined or fusion design, which is a recent megatrend, is very effective for the design of knitwear while increasing its aesthetic value. Moreover, utilizing techniques that combine patchwork applique, taping, stitching and quilting will create higher value in knitwear. Lastly, with a project of applying combined techniques in the creation of knitwear, designers can become much more creative while taking their imagination much further.