• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.25 no.1
• /
• pp.57-81
• /
• 1997

Numerical prediction of nocturnal thermal high in summer of the 1995 near Taegu city located in a basin has been carried out by a non-hydrostatic numerical model over complex terrain through one-way double nesting technique in the Z following coordinate system. Under the prevailing westerly winds, vertical turbulent fluxes of momentum and heat over mountains for daytime hours are quite strong with a large magnitude of more than $120W/\textrm{m}^2$, but a small one of $5W/\textrm{m}^2$ at the surface of the basin. Convective boundary layer (CBL) is developed with a thickness of about 600m over the ground in the lee side of Mt. Hyungje, and extends to the edge of inland at the interface of land sea in the east. Sensible heat flux near the surface of the top of the mountain is $50W/\textrm{m}^2$, but its flux in the basin is almost zero. Convergence of sensible heat flux occurs from the ground surface toward the atmosphere in the lower layer, causing the layer over the mountain to be warmed up, but no convergance of the flux over the basin results from the significant mixing of air within the CBL. As horizontal transport of sensible heat flux from the top of the mountain toward over the basin results in the continuous accumulation of heat with time, enhancing air temperature at the surface of the basin, especially Taegu city to be higher than $39.3^{\circ}C$. Since latent heat fluxes are $270W/\textrm{m}^2$ near the top of the mountain and $300W/\textrm{m}^2$ along the slope of the mountain and the basin, evaporation of water vapor from the surface of the basin is much higher than one from the mountain and then, horizontal transport of latent heat flux is from the basin toward the mountain, showing relative humidity of 65 to 75% over the mountain to be much greater than 50% to 55% in the basin. At night, sensible heat fluxes have negative values of $-120W/\textrm{m}^2$ along the slope near the top of the mountain and $-50W/\textrm{m}^2$ at the surface of the basin, which indicate gain of heat from the lower atmosphere. Nighttime radiative cooling produces a shallow nocturnal surface inversion layer with a thickness of about 100m, which is much lower than common surface inversion layer, and lifts extremely heated air masses for daytime hours, namely, a warm pool of $34^{\circ}C$ to be isolated over the ground surface in the basin. As heat transfer from the warm pool in the lower atmosphere toward the ground of the basin occurs, the air near the surface of the basin does not much cool down, resulting in the persistence of high temperature at night, called nocturnal thermal high or tropical night. High relative humidity of 75% is found at the surface of the basin under the moderate wind, while slightly low relative humidity of 60% is along the eastern slope of the high mountain, due to adiabatic heating by the srong downslope wind. Air temperature near the surface of the basin with high moisture in the evening does not get lower than that during the day and the high temperature produces nocturnal warming situation.

• Journal of Veterinary Clinics
• /
• v.7 no.2
• /
• pp.511-515
• /
• 1990

Induction of twinning was attempted by transfer of two whole- or demi-embryos in Holstein cows and heifers. Cows were superovulated with follicle stimulating hormone(FSH) administered twice daily in intra-muscular injection. On day of 6.5 to 7 post-estrus, embryos were collected nonsurgically, Normal morulae and early balstocysts were obtained from superovulated cows. The embryos were hisected with a micro-blade made from a razor. Twenty seven pairs of half embryos were successfully produced and 23 pairs of half embryos were transferred to recipients( Group A). Twenty cows were treated with low unit of FSH (3mg${\times}$2,2mg${\times}$2 ; Group B1, 2mg${\times}$2, 1mg${\times}$2, 1mg${\times}$2 ; Group 32) to induce double or triple ovulations. The cows of Group B1 and B2 were Inseminated artificially(A1) at following estrus. Twenty four heifers were bred by A1 and received an additional embryo into the uterine horn contralateral to the corpus luteum(CL) 6 days later(Group C). One embryo was transferred into each uterine hem of 16 heifers 6 days after estrus(Group D). Fourteen heifers were received two embryos into the uterine horn ipsilateral to the CL at day 6 of estrous cycle(Group I). Pregnancy rates at 60 days in Group A, B1, B2, C, D and E were 34.8％, 70.0％, 60.0％, 66.7％, 62.5％ and 57.1％, respectively. Twinning rates were 8.7％, 20.0%, 10.0％, 16.7％, 18.7％ and 21.4％, respectively. The present experiments demonstrate that FSH treatment( Group 31) and ipsilateral transfer( Group I ) of two whole-embryos are more useful methods to produce twins than the others.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.82-90
• /
• 2011

Because of the development of Smart phone devices, the demands of high performance FPU(Floating-point Unit) becomes increasing. Therefore, we propose the high-speed single-/double-precision FPU design that includes an elementary add/sub unit and improved multiplier and compare and convert units. The most commonly used add/sub unit is optimized by the parallel rounding unit. The matrix operation is used in complex calculation something like a graphic calculation. We designed the Multiply-Add Fused(MAF) instead of multiplier to calculate the matrix more quickly. The branch instruction that is decided by the compare operation is very frequently used in various programs. We bypassed the result of the compare operation before all the pipeline processes ended to decrease the total execution time. And we included additional convert operations that are added in IEEE754-2008 standard. To verify our RTL designs, we chose four hundred thousand test vectors by weighted random method and simulated each unit. The FPU that was synthesized by Samsung's 45-nm low-power process satisfied the 600-MHz operation frequency. And we confirm a reduction in area by comparing the improved FPU with the existing FPU.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.247-252
• /
• 2013

Pit and fissure sealant prevents biofilm accumulation, plays a role in forming a barrier to acidic substance made by the bacteria. The Surface reaction-type pre-reacted glass ionomerI(S-PRG) filler was developed in 1999. S-PRG filler releases fluoride continuously and does not decompose under wet conditions. The aim of this study was to test the microleakage and anticariogenic effect to adjacent enamel of S-PRG filler-containing pit and fissure sealant. Sound premolars and molars were used in this study. A S-PRG filler-containing pit and fissure sealant, Beautisealant$^{(R)}$(Shofu, Japan) was used for this experiment, the composite resin sealant Concise$^{(R)}$(3M ESPE, USA) was used as control. For the microleakage test, all teeth surface were double coated with finger nail varnish, with the exception of a 1.0 mm window around the restoration margins. The teeth were immersed in 2% methylene blue solution for 24 hours and then rinsed in tap water. For the anticariogenic effect evaluation, all tooth were immersed in artificial carious solution for 9 days and rinsed with tap water. Each tooth was embedded in orthodontic acrylic rein and subsequently sectioned longitudinally in a bucco-lingual direction with a low-speed diamond saw. The cut sections were examined using a stereomicroscope. Differences in microleakage between the two groups were not different significantly. But the S-PRG filler-containing pit and fissure sealant showed higher anticariogenic effect than that of flowable resin sealant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.6
• /
• pp.903-910
• /
• 2016

In this study, the expression level of estrogen receptor in an ovariectomized rat model was effectively enhanced by MS-10, Cirsium japonicum and Thymus vulgaris extract complex, in a reversible manner. MS-10 plays a positive role in enhancing estrogen activity at low concentrations, leading to improved women's health. In order to determine whether or not MS-10 improves menopausal symptoms clinically, a randomized, double-blinded, and placebo-controlled clinical study was carried out on 62 middle-aged women treated with 500 mg of MS-10 or placebo daily for 12 weeks. Clinical menopausal symptoms were evaluated by Kupperman's index (KI) detecting various menopausal symptoms, including hot flushes, parenthesis, insomnia, nervousness, melancholia, dizziness, fatigue, rheumatic pain, palpitations, formication, and headaches. Total KI score decreased significantly by about 18% upon ingestion of MS-10. Colpoxerosis, a main symptom of menopause, was significantly reduced by about 21% upon ingestion of MS-10 in contrast to placebo. In addition, reduction of insulin-like growth factor-1 with age was improved by over 10% upon ingestion of MS-10, whereas there were no significant difference with placebo. No side effects appeared after treatment with MS-10. Thus, MS-10 can be suggested as a plausible natural substance for improving women's health.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1278-1284
• /
• 2000

An experiment was performed to evaluate different methods for preserving shrimp by-products and to determine their chemical composition. In the first experiment three ratios of shrimp by-product (SBP) to molasses (6:1, 4:1 and 3:1, wet weight), and to cassava root meal (3:1, 2:1 and 1:1, wet weight of shrimp by-product and air-dry weight of cassava root meal) were investigated. The pH of the SBP ensiled with molasses at a ratio of 3:1, and with cassava root meal at a ratio of 1:1, decreased during the first week to below 4.5 and remained low up to day 56 of ensiling, whereas the pH of the mixtures with higher ratios of SBP remained above 7.0, and the material deteriorated rapidly. The dry matter decreased initially in all treatments but then increased slightly from day 28 in the treatment where shrimp by-product was ensiled with cassava root meal at a ratio of 1:1. The crude protein (CP) and ammonia-N $(NH_3-N)$ contents of the preserved shrimp by-product material ensiled with molasses at a ratio of 3:1 increased significantly one week after ensiling. The CP content then remained constant, while the $NH_3-N$ concentration continued to increase up to 56 days after ensiling. When SBP was ensiled with cassava root meal at a ratio of 1:1 the CP content of the silage increased significantly up to 21 days after ensiling and then decreased back to the original level after 56 days, whereas $NH_3-N$ increased markedly up to 14 days and then remained fairly constant up to 56 days. However, the $NH_3-N$ content was significantly higher when SBP was ensiled with cassava root meal than with molasses. A balance experiment was carried out, arranged as a double Latin-square and including 6 F1 (Large White ${\times}$ Mong Cai) castrates fed randomly one of three diets based on cassava root meal, rice bran, and fish meal (FM) or shrimp by-product ensiled with molasses (SBEMO) or with cassava root meal (SBECA) as the main protein source. Apparent organic matter and CP digestibilities were significantly (p<0.001) higher for the fish meal diet than for the two shrimp by-product diets, although CP digestibility in SBEMO and SBECA was similar (p>0.05). N-retention was significantly higher for the fish meal diet than for the SBEMO diet, which in turn was significantly higher than for the SBECA diet (p<0.01). It can be concluded that shrimp by-product can be preserved by ensiling with molasses at a ratio of 3:1 or with cassava root meal at a ratio of 1:1. Nutrient digestibility and N-retention of diets based on these shrimp by-product silages were lower than for similar diets based on fish meal, probably due to their high chitin content and inferior amino acid balance.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.566-572
• /
• 2020

In the recent years, thin film solar cells (TFSCs) have emerged as a viable replacement for crystalline silicon solar cells and offer a variety of choices, particularly in terms of synthesis processes and substrates (rigid or flexible, metal or insulator). Among the thin-film absorber materials, SnS has great potential for the manufacturing of low-cost TFSCs due to its suitable optical and electrical properties, non-toxic nature, and earth abundancy. However, the efficiency of SnS-based solar cells is found to be in the range of 1 ~ 4 % and remains far below those of CdTe-, CIGS-, and CZTSSe-based TFSCs. Aside from the improvement in the physical properties of absorber layer, enormous efforts have been focused on the development of suitable buffer layer for SnS-based solar cells. Herein, we investigate the device performance of SnS-based TFSCs by introducing double buffer layers, in which CdS is applied as first buffer layer and ZnMgO films is employed as second buffer layer. The effect of the composition ratio (Mg/(Mg+Zn)) of RF sputtered ZnMgO films on the device performance is studied. The structural and optical properties of ZnMgO films with various Mg/(Mg+Zn) ratios are also analyzed systemically. The fabricated SnS-based TFSCs with device structure of SLG/Mo/SnS/CdS/ZnMgO/AZO/Al exhibit a highest cell efficiency of 1.84 % along with open-circuit voltage of 0.302 V, short-circuit current density of 13.55 mA cm^-2, and fill factor of 0.45 with an optimum Mg/(Mg + Zn) ratio of 0.02.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.737-743
• /
• 2000

Polyquinonediimines (PQDI) which have stable structure on heat and contains mono-azobenzene in the side chain were synthesized by means of condensation polymerization under TiCl$_4$. The synthesized monomers and polymers were identified by FT-IR, $^1$H-NMR, and elementary analysis. Especially, PQDI was comfirmed by the double-bonding peak of >C=N appeared near 1625 $cm^{-1}$ / by means of FT-IR spectrum. PQDI containing mono-azobenzene group in both side chains wat not soluble in non-polar solvents at all but partially soluble in the polar solvents having small dielectric constant, and dissolved in the strong acid such as sulfuric acid and $CH_3$SO$_3$H. Molecular weight distribution of PQDI measured by GPC showed 1.74. It was confirmed through X-ray diffraction analysis that the polymer was partially crystalline at the low angle region, but amorphous after heat treatment at 1$25^{\circ}C$. The glass transition temperature (T$_{g}$ ) of synthesized polymer was measured as 1$25^{\circ}C$ by differential scanning calorimetry. The SHG value for $\chi$$^{(2)}$ after poling at 1$25^{\circ}C$ was 8.6 pm/V (λ=1.542 ${\mu}{\textrm}{m}$). The SHG value slowly decreased with time from the start but appeared temporal stability after 100 hours.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.279-285
• /
• 2006

We investigated the effects of immobilization chemistry on the yield of immobilization and the bioactivity of the immobilized enzymes. Trypsin as a model protein and macroporous polymer beads(Toyopearl AF 650M, Tosho Co., Japan) was used as a model matrix. Four methods were used to immobilize trypsin; covalent conjugation by reductive amination(at pH 10.0 and pH 4.0) and affinity interaction via streptavidin-biotin, and double-affinity interaction via biotin-streptavidin-biotin system. The covalent conjugation immobilized $3{\sim}4$ mg/ml-gel, ca. 3-fold higher than the affinity method. However, the specific activity of the covalently(pH 10.0) and affinity-immobilized trypsin(via streptavidin-biotin) are ca. 37% and 50%, respectively, of that of the soluble enzyme(on the low-molecular-weight BAPNA substrate). When the molecular size of a substrate increased, the affinity-immobilized trypsin showed higher clavage activity on insulin and BSA. This result seemed to indicate the streptavidin-biotin system allowed more steric flexibility of the immobilized trypsin in its interaction with a substrate molecule. To confirm this, we studied the molecular flexibility of immobilized trypsin using quartz crystal microbalance-dissipation. Self-assembled monolayers were formed on the Q-sensor surface by aminoalkanethiols, and gultaraldehyde was attached to the SAMs. Trypsin was immobilized in two ways: reductive amination(at pH 10.0) and the streptavidin-biotin system. The dissipation shift of the affinity-immobilized trypsin was $0.8{\times}10^{-6}$, whereas that of the covalently attached enzyme was almost zero. This result confirmed that the streptavidin-biotin system allowed higher molecular flexibility. These results suggested that the bioactivity of the immobilized enzyme be strongly dependent on its molecular flexibility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.9-16
• /
• 2020

Wireless charging has been considered an essential part of recent mobile devices. Moreover, various wireless charging systems have emerged through many studies. Among the systems, in the 2D flat coil system, the transmitter coil and receiver coil are arranged horizontally as close as possible to improve the charging efficiency. Nowadays, the 3D coil system has been proposed by adding some slope to flat 2D coils to reduce the volume. On the other hand, the 3D coil system has a lower charging efficiency than the 2D system that decreases rapidly with increasing distance. This paper proposes a new system that improves the low efficiency and charging freedom, which are the drawbacks of the existing 3D systems. The proposed system was designed in three-dimensions, and another transmitter coil was added to the transmitter coil to improve the transmission efficiency and flexibility. The measurement showed that the charging efficiency of the proposed system was 40.10% when the distance between coils was 8 mm, which is 20.5 % improvement over the existing one. The proposed method can be applied when new wireless charging systems are designed and improve charging efficiency can be improved.