• 제목/요약/키워드: double enhancement

검색결과 178건 처리시간 0.029초

절연막을 이용한 단면 표면조직화 결정질 실리콘 태양전지 (The Single-Side Textured Crystalline Silicon Solar Cell Using Dielectric Coating Layer)

  • 도겸선;박석기;명재민;유권종;송희은
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 추계학술발표대회 논문집
    • /
    • pp.245-248
    • /
    • 2011
  • Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

  • PDF

이중 몰딩에 의한 백색 LED의 광추출 효율 향상 (Enhancement of Light Extraction in White LED by Double Molding)

  • 장민석;김완호;강영래;김기현;송상빈;김진혁;김재필
    • 한국전기전자재료학회논문지
    • /
    • 제25권10호
    • /
    • pp.849-856
    • /
    • 2012
  • Chip on board type white light emitting diode on metal core printed circuit board with high thixotropy silicone is fabricated by vacuum printing encapsulation system. Encapsulant is chosen by taking into account experimental results from differential scanning calorimeter, shearing strength, and optical transmittance. We have observed that radiant flux and package efficacy are increased from 336 mW to 450 mW and from 11.9 lm/W to 36.2 lm/W as single dome diameter is varied from 2.2 mm to 2.8 mm, respectively. Double encapsulation structure with 2.8 mm of dome diameter shows further significant enhancement of radiant flux and package efficacy to 667 mW and 52.4 lm/W, which are 417 mW and 34.8 lm/W at single encapsulation structure, respectively.

양흡입 원심블로어 성능향상을 위한 입구 유동 최적화 연구 (Evaluation of Inflow Uniformity on the Performance of Double-Inlet Centrifugal Blower Using Optimal Design Method)

  • 이종성;장춘만;전현준
    • 한국수소및신에너지학회논문집
    • /
    • 제24권4호
    • /
    • pp.326-333
    • /
    • 2013
  • This paper presents the performance enhancement of a double-inlet centrifugal blower by the shape optimization of an inlet duct. Two design variables, a length of anti circulation vane and an angles of inlet guide, are introduced to improve the inlet flow uniformity leading to the blower performance. Three-dimensional Navier-Stokes equations are used to analyze the blower performance and the internal flow of the blower. From the shape optimization of the inlet duct of the double-inlet centrifugal blower, the optimal positions of each design variable are determined. Throughout the analysis of sensitivity, it is found that the angle of the inlet guide is more effective than the length of the anti-circulation vane to increase flow uniformity at the outlet of the duct. Efficiency and pressure for the optimal inlet duct shape are successfully increased up to 3.55% and 3.2% compared to those of reference blower at the design flow condition, respectively. Detailed flow field inside the blower is also analyzed and compared.

이중 EHA의 제어 특성 개선 (Control-performance Improvement of Dual EHAs)

  • 이성렬;홍예선
    • 드라이브 ㆍ 컨트롤
    • /
    • 제13권3호
    • /
    • pp.32-38
    • /
    • 2016
  • For this paper, the position-control performances of dual EHA(electro-hydrostatic actuator) systems were investigated according to two cases wherein the double-rod- and single-rod-type hydraulic cylinders were combined. Since the control performance is significantly dependent on the load conditions including external forces such as the inertia load, it is proposed here that the two sub-EHAs are driven by separate position and force controllers, instead of two identical position controllers. According to the simulation results, the best performance was achieved by the position-controlled single-rod-type EHA that was combined with a force-controlled double-rod-type EHA. As the force-controlled double-rod-type EHA compensated for the external loads on the position-controlled single-rod-type EHA, the position-control performance was not influenced by external forces including the inertia load. In addition, the position-controlled single-rod-type EHA contributed to the enhancement of the damping ratio by absorbing the pressure peaks through its internal accumulator. Due to the symmetrical piston areas, the double-rod-type EHA is more suitable for force control than the single-rod- type EHA.

Amelioration of Cognitive Dysfunction in APP/PS1 Double Transgenic Mice by Long-Term Treatment of 4-O-Methylhonokiol

  • Jung, Yu-Yeon;Lee, Young-Jung;Choi, Dong-Young;Hong, Jin Tae
    • Biomolecules & Therapeutics
    • /
    • 제22권3호
    • /
    • pp.232-238
    • /
    • 2014
  • Alzheimer's disease (AD) is the most common neurodegenerative disease without known ways to cure. A key neuropathologic manifestation of the disease is extracellular deposition of beta-amyloid peptide (Ab). Specific mechanisms underlying the development of the disease have not yet been fully understood. In this study, we investigated effects of 4-O-methylhonokiol on memory dysfunction in APP/PS1 double transgenic mice. 4-O-methylhonokiol (1 mg/kg for 3 month) significantly reduced deficit in learning and memory of the transgenic mice, as determined by the Morris water maze test and step-through passive avoidance test. Our biochemical analysis suggested that 4-O-methylhonokiol ameliorated $A{\beta}$ accumulation in the cortex and hippocampus via reduction in beta-site APP-cleaving enzyme 1 expression. In addition, 4-O-methylhonokiol attenuated lipid peroxidation and elevated glutathione peroxidase activity in the double transgenic mice brains. Thus, suppressive effects of 4-O-methylhonokiol on $A{\beta}$ generation and oxidative stress in the brains of transgenic mice may be responsible for the enhancement in cognitive function. These results suggest that the natural compound has potential to intervene memory deficit and progressive neurodegeneration in AD patients.

Tribological enhancement of $CaCO_3$dissolution during scanning force microscopy

  • Kjm, Jong-Min;Hwang, Do-Jin;Lee, Joo-sun;Kim, Myoung-Won
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제4권4호
    • /
    • pp.102-106
    • /
    • 2000
  • We report scanning force microscope (SFM) observations of enhanced calcite dissolution in aqueous solution due to mechanical stimulation induced by the SFM tip. Images and mechanical treatment were performed in saturated ($\geq$ 60 ${\mu}{\textrm}{m}$) CaCO$_3$ solution adjusted to pH~9. Small area scans of monolayer steps significantly increased the step velocity in the scanned area (in the direction corresponding to dissolution) when the applied contact force is above about 160 nN fer the tips employed. The step velocity could be increased at least an order of magnitude by scanning at even higher contact forces (e.g.,270nN). This enhancement is a function of step orientation relative to the calcite lattice. Indentations near preexisting steps also locally enhance the step velocity. We present evidence that the higher dissolution rates are caused by stress-induced increases in the rate of double-kink nucleation.

  • PDF

Nucleation of CVD Diamond on Various Substrate Materials

  • Fukunaga, O.;Qiao, Xin;Ma, Yuefei;Shinoda, N.;Yui, K.;Hirai, H.;Tsurumi, T.;Ohashi, N.
    • The Korean Journal of Ceramics
    • /
    • 제2권4호
    • /
    • pp.184-187
    • /
    • 1996
  • Diamod nucleation by mw assisted CVD was examined various conditions namely, (1) diamond nucleation on variour substrate materials, such as Si, cubic BN, pyrolytic BN and AIN, (2) AST(Activated species transport) method which promote nucleation of diamond on single crystal and polycrystalline alumina substrate was developed. (3) Effect of bias enhancement of nucleation on single crystalline Si was examined, and finally (4) DST (Double step treatment) method was developed to enhance diamond nucleation on Ni. In this method, we separated carbon diffusing process into Ni, carbon precipitating process from the inside of Ni and diamond precipitation process.

  • PDF

On the origin of super-Helium-rich population in the Milky Way bulge

  • Kim, Jaeyeon;Han, Daniel;Lee, Young-Wook
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.66.4-67
    • /
    • 2016
  • Our recent investigation (Lee et al. 2015) suggests that the presence of double red clump in the Milky Way bulge is another manifestation of multiple populations observed in halo globular clusters. The origin of Helium enhancement in the 2nd generation population (G2), however, is not yet fully understood. Here we investigate the origin of this super-Helium-rich population in the framework of self-enrichment scenario. We find that chemical enrichments and pollutions by asymptotic giant branch stars and winds of massive rotating stars can naturally reproduce the observed Helium enhancement. The Helium to metal enrichment ratio appears to be ${\Delta}Y/{\Delta}Z=6$ for G2, while the standard ratio, ${\Delta}Y/{\Delta}Z=2$, is appropriate for G1, which is probably enriched mostly by typeII supernovae.

  • PDF

농어촌 지역 RC 건축물 기둥 부재의 탄소섬유시트 횡보강 효과 (Effects of Carbon-Fiber Sheets on Lateral Confinement in Columns of RC Buildings in Rural Area)

  • 김윤일;천형민
    • 한국농촌건축학회논문집
    • /
    • 제6권3호
    • /
    • pp.106-115
    • /
    • 2004
  • In this paper, the compressive strength and ductility enhancement of concrete by lateral confinement of carbon-fiber sheets(CFS) have been studied experimentaly with cylinder specimens and square short columns reinforced externally by CFS. Test variables were amount of lateral reinforcement by CFS and space of hoop bars. Test results showed that lateral reinforcements by carbon-fiber sheets provided lateral confinement successfully for the concrete specimens and were more effective for ductility enhancement than for strength increase, and that the lateral confinement coefficient of cabon-fiber sheets increased according to narrowing the space of hoop bars in the double lateral confinement made by CFS and hoop bars.

  • PDF

적응 다중 참조 이동 보상을 이용한 에러에 강인한 스케일러블 동영상 전송 기법 (Robust Scalable Video Transmission using Adaptive Multiple Reference Motion Compensated Prediction)

  • 김용관;김승환;이상욱
    • 한국통신학회논문지
    • /
    • 제29권3C호
    • /
    • pp.408-418
    • /
    • 2004
  • 본 논문에서는 동영상 부호화의 이동 보상 과정에서 다중의 참조 영상들을 적응적으로 이용하는 새로운 스케일러블(scalable) 부호화 기법을 제안한다. 제안 기법은 입력 신호의 특성을 고려하여. 확장계층 및 기저계층에서 다중의 이동 참조 영상들에 대한 최적 가중 값을 적응적으로 구한다. 이러한 기법을 이용하여. 확장계층의 부호화 효율 및 오류에 대한 강인성을 향상시킨다. 또한 복호기에서 전송 오류가 검출된 경우. 적응적으로 참조 영상을 선택함으로써 에러 파급(drift) 현상을 현저히 감소시킨다 실험 결과들로부터, 제안하는 적응적인 스케일러블 부호화 기법은 다양한 채널 에러(channel error) 환경에서, 기존의 스케일러블 H.263+부호화 기법에 비하여 PSNR 성능이 약 1.0㏈ 이상 향상됨을 확인할 수 있었다.