• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.424-425
• /
• 2006

Zinc sulfide is a well-known host material of phosphor emitting different radiations dependent on different doping impurities of metallic ion. It emits green, blue, orange-yellow or white colors by doping with activators such as copper, silver, manganese and so on. In this study, manganese, copper and chlorine doped ZnS phosphor (ZnS:Mn,Cu,Cl) was synthesized by solid-state reaction method. The optical properties were investigated according to different concentrations of sulfur and activators used during the synthesis process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.341-341
• /
• 2010

Electronic structure of Calix adsorbed on epitaxial graphene (EG) was investigated using high resolution photoemission spectroscopy (HRPES). Increasing the deposition of calix molecule, we found that EG becomes n-type doping using secondary edge measurement (work function change). As we observe bonding nature of O 1s peak, we found that single O 1s peak can be clearly distinguished in the spectra indicating equivalent adsorption state. Finally, we were able to control the band gap of EG using valence band spectra as we change the amount of calix molecule. In this study, we will propose the possibility of band gap modulation of EG using calix molecule.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1371-1374
• /
• 2001

Metal doping was adopted to modify TiO2 (P-25) and enhance the photocatalytic degradation of harmful cyanides in aqueous solution. Ni, Cu, Co, and Ag doped TiO2 were found to be active photocatalysts for UV light induced degradation of aqueous cyanides generating cyanate, nitrate and ammonia as main nitrogen-containing products. The photoactivity of Ni doped TiO2 was greatly affected by the state of Ni, that is, the crystal size and the degree of reduction of Ni. The modification effects of some mixed oxides, that is, Ni-Cu/TiO2 were also studied. The activity of Ni-Cu/TiO2 for any ratio of Cu/Ni was higher than that of Ni- or Cu-doped TiO2, and the catalyst at the Cu/Ni ratio of 0.3 showed the highest activity for cyanide conversion.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.489-492
• /
• 2013

N-doped $TiO_2$ microcuboids were successfully prepared by a simple one-pot hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. It was found that the N-doped $TiO_2$ microcuboids enhanced absorption in the visible light region, and exhibited higher activity for photocatalytic degradation of model dyes. Based on the experimental results, a visible light induced photocatalytic mechanism was proposed for N-doped anatase $TiO_2$ microcuboids.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.565-569
• /
• 2018

For the conventional power MOSFET (metal-oxide semiconductor field-effect transistor) device structure, there exists a tradeoff relationship between specific on-state resistance (Ron,sp) and breakdown voltage (BV). In order to overcome this tradeoff, a super-junction (SJ) trench MOSFET (TMOSFET) structure with uniform or non-uniform doping concentration, which decreases linearly in the vertical direction from the N drift region at the bottom to the channel at the top, for an optimal design is suggested in this paper. The on-state resistance of $0.96m{\Omega}-cm2$ at the SJ TMOSFET is much less than that at the conventional power MOSFET under the same breakdown voltage of 100V. A design methodology for the edge termination is proposed to achieve the same breakdown voltage and on-state resistance as the main body of the super-junction TMOSFET by using of the SILVACO TCAD 2D device simulator, Atlas.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.466-472
• /
• 2012

Visible-light-responding photocatalysts, $N-TiO_2$, were prepared by nitrogen doping onto $TiO_2$. The crystalline structure and morphology, doping state of the prepared photocatalysts were characterized by XRD, FE-SEM, and XPS. The activity of the prepared photocatalysts was examined by the decomposition of methyleneblue. The prepared catalysts were anatase type and the crystallinity was increased with pH. The particle sizes of the prepared catalysts were 5.42, 5.99, 7.58 nm at pH 2.2, 4.7, 9.0, respectively. The particle sizes of the prepared catalysts were slightly increased with pH. The activity of the photocatalysts was directly proportional to the crystallinity of the catalysts. $N-TiO_2$ prepared by nitrogen doping onto $TiO_2$ showed activity under visible light. The doped nitrogen was located not in the lattice but on the surface.

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.100-105
• /
• 2001

An all solid-state thin film battery (TFB) was fabricated by growing, undoped and Pt-doped vanadium oxide cathode film ( $V_2$ $O_{5}$ ) on I $n_2$ $O_3$: Sn coated glass, respectively. Room temperature charge-discharge measurements based on Li/Lipon/ $V_2$ $O_{5}$ full-cell structure with a constant current clearly shows that the Pt-doped $V_2$ $O_{5}$ cathode film is superior, in terms of cyclibility. X-ray diffraction (XRD) results indicate that the Pt doping process induces a more random amorphous structure than an undoped $V_2$ $O_{5}$ film. In addition to its modified structure, the Pt-doped $V_2$ $O_{5}$ film has a smoother surface than the undoped sample. Compared to an undoped $V_2$ $O_{5}$ film, the Pt doped $V_2$ $O_{5}$ cathode film has a higher electron conductivity. We hypothesize that the addition of Pt alters electrochemical performance in a manner of making more random amorphous structure and gives an excess electron by replacing the $V^{+5}$. Possible mechanisms are discussed for the observed Pt doping effect on structural and electrochemical properties of vanadium oxide cathode films, which are grown on I $n_2$ $O_3$: Sn coated glass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.254-254
• /
• 2011

현재 AMLCD(Active Matrix Liquid Crystal Display)는 노트북, 컴퓨터, TV등 여러 영상매체에 있어 가장 많이 활용되고 있는 디스플레이로 손꼽힌다. AMLCD에 구동소자로 사용되는 a-Si:H TFT는 낮은 제조비용과 축적된 기술을 바탕으로 가장 많이 쓰이고 있다. 특히 a-Si이 가지는 소형화나 대형화의 편의성은 모바일 기기, projection TV, 광고용 패널 등 적용분야가 점점 넓어지고 있는 추세이다. 하지만 a-Si라는 물질 자체가 가지는 낮은 이동도는 더 많은 application을 위해 해결되어야 할 과제이다. 낮은 이동도는 a-Si 실리콘 원자간 결합의 불규칙성 및 무질서와 dangling bond에 의한 localize state(deep trap, band tail)의 존재 때문에 발생하며 결과적으로 TFT 소자의 특성의 저하를 가져온다. 앞선 연구에서는 carrier이동도의 개선을 위해서 첫 번째로 insulator층과 active층 사이의 계면 상태를 향상시키기 위해 insulator로 쓰이는 a-SiN층 표면에 0~18 sccm의 유량으로 phosphorus를 주입하였다. AFM분석을 해본 결과 phosphorus를 주입함으로써 계면의 roughness가 줄어드는 것을 확인 할 수 있었다. 이러한 계면의 roughness 감소는 표면 산란(surface scattering)및 전자 포획(trap)의 영향을 줄임으로써 이동도의 향상을 가져왔다. 두 번째로 active층으로 쓰이는 a-Si:H 층의 표면에 phosphorus를 0?9sccm의 유량으로 doping하였다. 이로 인해 channel이 형성되는 active 영역에 직접적으로 불순물을 doping됨으로써 전도도를 증가되어 이동도를 향상시켰다. 하지만 지나친 doping은 불순물 산란(impurity scattering)의 증가로 인해 이동도를 저하시키는 결과를 보여 주었다. 본 연구에서는 TFT의 이동도 향상을 위해 두 가지의 technology를 함께 적용시켜 a-SiN/a-Si:H 계면 각각에 phosphorus를 주입 및 doping을 하였다. 모든 박막은 PECVD로 제작하였으며 각 박막의 두께는 a-SiN/a-SiN(phosphorus)/a-Si:H(doped)/a-Si:H/n+ a-Si($2350{\AA}/150{\AA}/150{\AA}/1850{\AA}/150{\AA}$)으로 고정하고 유량을 변화시키면서 특성을 관찰하였다.

• Journal of Magnetics
• /
• v.10 no.1
• /
• pp.10-13
• /
• 2005

We have studied effects of the partial substitution of $La^{3+}$ for $A^{2+}$ on the magnetic properties of double perovskites $A_2FeMoO_6$ (A=Ca, Sr and Ba). Polycrystalline $A_{2-x}La_xFeMoO_6(0{\leq}x{\leq}0.2)$ samples have been prepared by the conventional solid-state reaction in a stream of 5% $H_2$/Ar gas. The x-ray data indicate that A=Ca is monoclinic with the space group P$2_1$/n, A=Sr is tetragonal with the space group I4/mmm, and A=Ba is cubic with the space group Fm3m. The substitution of $La^{3+}$ for $A^{2+}$ results in a cell volume increase for A=Ca and a cell volume reduction for A=Ba. The decrease of saturation magnetization with increasing x arises from the reduction of magnetic moment associated with the electron doping and the disorder at the Fe and Mo sites. The partial substitution of magnetic $La^{3+}$ for $A^{2+}$ considerably enhances the Curie temperature $T_c$ from 316 K for x = 0 to 334 K for x = 0.2. This enhancement of $T_c$ with $La^{3+}$ doping originates from electron doping effects in addition to ionic size ones.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.86-90
• /
• 2017

$Tb^{3+}$ or $Eu^{3+}$ or $Ce^{3+}$-doped $CaYAlO_4$ phosphor were synthesized by solid-state method. $CaYAlO_4:Tb^{3+}$ is shown that the $Tb^{3+}$-doping concentration has a significant effect on the $^5D_4/^5D_3{\rightarrow}7F_J$ (J=6,...,0) emission intensity of $Tb^{3+}$. The $CaYAlO_4:Tb^{3+}$ phosphors show tunable photoluminescence from blue to yellow with the change of doping concentration of $Tb^{3+}$ ions. The $CaYAlO_4:Eu^{3+}$ phosphors exhibit a red-orange emission of $Eu^{3+}$ corresponding to $^5D_0$, $_{1,2}{\rightarrow}^7F_J$ (J=4,...,0) transitions. The $CaYAlO_4:Ce^{3+}$ phosphors show a blue emission due to $Ce^{3+}$ ions transitions from the 5d excited state to the $^2F_{5/2}$ and $^2F_{7/2}$ ground states. The decay time of $CaYAlO_4:Tb^{3+}$ phosphors decrease from 1.33 ms to 0.97 ms as $Tb^{3+}$ concentration increases from 0.1 mol% to 7 mol%. The decay time of $CaYAlO_4:Eu^{3+}$ phosphors increase from 0.94 ms to 1.17 ms as $Eu^{3+}$ concentration increases from 1 mol% to 9 mol%.