• Korean Journal of Applied Biomechanics
• /
• 제32권1호
• /
• pp.9-16
• /
• 2022

Objective: The purpose of this study was to investigate how the chronic ankle instability affects postural control during forward jump landing. Method: 20 women with chronic ankle instability (age: 21.7 ± 1.6 yrs, height: 162.1 ± 3.7 cm, weight: 52.2 ± 5.8 kg) and 20 healthy adult women (age: 21.8 ± 1.6 yrs, height: 161.9 ± 4.4 cm, weight: 52.9 ± 7.2 kg) participated in this study. For the forward jump participants were instructed to stand on two legs at a distance of 40% of their body height from the center of force plate. Participants were jump forward over a 15 cm hurdle to the force plate and land on their non-dominant or affected leg. Kinetic and kinematic data were obtained using 8 motion capture cameras and 1 force plates and joint angle, vertical ground reaction force and center of pressure. All statistical analyses were using SPSS 25.0 program. The differences in variables between the two groups were compared through an independent sample t-test, and the significance level was to p < .05. Results: In the hip and knee joint angle, the CAI group showed a smaller flexion angle than the control group, and the knee joint valgus angle was significantly larger. In the case of ankle joint, the CAI group showed a large inversion angle at all events. In the kinetic variables, the vGRF was significantly greater in the CAI group than control group at IC and mGRF. In COP Y, the CAI group showed a lateral shifted center of pressure. Conclusion: Our results indicated that chronic ankle instability decreases the flexion angle of the hip and knee joint, increases the valgus angle of the knee joint, and increases the inversion angle of the ankle joint during landing. In addition, an increase in the maximum vertical ground reaction force and a lateral shifted center of pressure were observed. This suggests that chronic ankle instability increases the risk of non-contact knee injury as well as the risk of lateral ankle sprain during forward jump landing.

• Composites Research
• /
• 제20권5호
• /
• pp.26-33
• /
• 2007

Pull-out and shear strengths of insert Joints of sandwich structure were investigated by experiment. Specimens were prepared by cocuring of nomex honeycomb core and carbon-epoxy composite face using an adhesive FM73. A total of 75 specimens with 10 different types depending on the core height and density, face thickness, and loading direction were tested. In the test under pull-out loading, although both the core height and density affect the failure loads, the effect of cell density is more serious. Dominant factor fur failure loads of the joints under shear loading is face thickness and the effect of core height is negligible. In the joint with same dimension, failure loads vary depending on the potted area of the core, particularly in the pull-out test.

• Journal of Korean Society of Forest Science
• /
• 제95권1호
• /
• pp.102-112
• /
• 2006

The change of species composition and stand structure along altitudinal gradients in different aged stands was studied in five natural stands located each at 400 m, 800 m, 1,000 m, and two at 1,300 m above sea level (asl) in the western part of Mt. Chiri in Korea. Trees larger than 2.5 cm DBH were inventoried in 3 to 8 $20m{\times}20m$ quadrats in each study site. Stand ages were estimated based on the ages of Pinus densiflora Siebold & Zucc. and Abies koreana Wilson, and used to analyze the changes in species composition and stand structure including diameter and height distributions. Species composition was changed along altitudinal gradients as P. densiflora dominated stands at 400 m asl while A. koreana dominated stands at 1,300 m asl. Major species of Quercus also changed along altitudinal gradients as Quercus variabilis Blume at 400 m asl, Quercus serrata Thunb. ex Murray at 800 m asl, and Quercus mongolica Fisch. ex Ledeb. at higher than 1,000 m asl. The diameter distribution did not show significant differences among stands of different altitudes. However, the height distributions of upper crown layers were significantly different among stands at below and above 1,000 m as) (P < 0.0001). Trees taller than 20 m rarely appeared in stands over 1,000 m asl. P. densiflora dominant stands at 400 m asl developed two clumped age groups as one in 30-40 ages and the other around 70 years old. Q. serrata dominant stands at 800 m asl, Q. mongolica dominant stands at 1,300 m asl and A. koreana dominant stands at 1,300 m asl were estimated to be around 30, 70, and over 140 years old after major disturbances, respectively. The diameter distribution with age structure indicated that P. densiflora at 1,300 m asl might be replaced by Q. mongolica, and Q. mongolica might be replaced by A. koreana and Pinus koraiensis later. A. koreana dominant stand seemed to stay its dominance quite long if the large disturbance would be absent.

• Journal of Korean Society for Quality Management
• /
• 제29권3호
• /
• pp.151-165
• /
• 2001

The purpose of this study is to develop systematic methods for evaluating the suitability of a seat and build an empirical model for predicting the suitability of a seat. The following research schemes were pursued to achieve the objectives - Development of suitable chair dimensions - Analysis scheme for decomposing the human-product interface system - Development of model for evaluating suitability. As a result, we uncovered six dominant suitability dimensions for the design of a comfortable seat that is related to the physical dimension of a body, Here, six suitability dimensions were identified as the dimensions that represent the human sensitivity and psychological feeling on comfortable seats. Also, 43 human-interface elements (HIE's) such as seat height, seat width, seat depth, tilting angle, seat surface etc. were investigated. HIE was generally defined as the physical characteristic of manufacturing goods, and it had close related to the body dimension of a user and environment that it was used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.603-606
• /
• 2005

This study is to make good acoustic environment around Gwang-ju riverside and performed survey and measurement of soundscape. The survey was focused on the types of sound producing. The results of measurement and analysis are as follows: 1) The types of sound at reverside were twenty and the Leq(equivalent noise level) was ranging from 50 dB(A) to 76 dB(A). The dominant sound was road traffic noise. 2) In the upperstream and the downstream, the sound of wind, bird and water was observed. 3) In the inner city, the water sound was produced by the difference of the height of the weir to mask the road traffic noise.

• Journal of Korean Society for Atmospheric Environment
• /
• 제10권3호
• /
• pp.203-208
• /
• 1994

The trend of visibility variation of Seoul during 1980-1993 is analyzed. Annual average visibility has been decreased during the 1980s except 1988 and 1989 but not decreasing during the early 1990s. Also, the number of days with haze during 1983-1993 did not increase. Mixing height is deemed to be a dominant factor determining visibility. During the period, the difference between the average visibility at 6 p.m and 9 a.m decreased with the average visual range at 9 a.m slightly increased. Thus there is possibility that the effect of Photochemcial reactions becomes noticeable. The number of vehicles and the concentration of criteria air pollutants on the trend of visibility variation of Seoul would not be directly related to the variation of visibility.

• Journal of Korean Society of Rural Planning
• /
• 제5권1호
• /
• pp.56-65
• /
• 1999

The purpose of this study was to identify remained real state of the village groves in human settlement circle. That was practiced in case of Chinan-Gun region which traditional elements had well been conserved. 33 village groves were found by site survey, reference and interview in Chinan-Gun region. 31 of 51 village groves were clarified as complementing village grove by classification of grove character. It was identified through survey that many were partially destructed by development and human overuse. The results of this study showed general, socio-behavioral characteristics, characteristics of forest state and vegetation structure of village groves in Chinan-Gun region. Length, area, form, type, motive, location, relationship of those were analyzed to identify general characteristics. Facilities, human behavior and ownership of those were analyzed to identify socio-behavioral characteristics. Principal dominant species and appearing rate, height, width, density of those, species diversity of groves were analyzed to identify forest state and vegetation structure. Interrelation between each factor were analyzed and comparative review with previous studies was achieved.

• Journal of Forest and Environmental Science
• /
• 제31권3호
• /
• pp.202-206
• /
• 2015

Site index curves were developed for Larix kaempferi and Pinus koraiensis in Gangwon and North Gyeongsang provinces in Korea. For the development of site index, Schumacher and Chapman-Richards model were applied using the data collected from 2012 to 2014. Base age was set to 40 years for Larix kaempferi and Pinus koraiensis in site index of this study. Coefficient of determination and root mean square error of site index models were provided by species, and the models were compared with the previous studies to check the suitability. Overall, site index models developed in this study fitted in the current data well. Thus, the site indexes are considered to be properly used in Gangwon and North Gyeongsang provinces.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.321-324
• /
• 2003

This paper presents a novel system that analyzes and recognizes a gait based on shape context on silhouette images. The main functions of the system consist of three steps: First, the system extracts the silhouette images from galt image sequence by performing a simple pre-processing and acquires the AGM(Averaged Gait Map) by averaging them. Next. it computes the cross-correlation between the AGMs. Finally, it classifies the AGMs based on the cross-correlation using nearest neighborhood classification. The proposed system uses two cues to classify a gait: One corresponds to biometric shape cue such as body height width. and body-part proportions. The other corresponds to gait cue such as stride length and amount of arm swing. Perceptionally, the biometric cues are sailent on the double support (both legs spread and touching the ground) while the gait cues on the midstance. Through a variety of experiments, it is proved that the property of a gait is mainly influenced by gait cues than biometric cues.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.569-572
• /
• 2003

In VLM-ST process, the fine detailed shape processing process is needed due to the use of thick sheets for layers. The developed process perform the fine detailed shape processing in VLM-ST parts using non-contact hot tool. To predict the heat-affected zone and temperature distribution of VLM-ST parts in detailed shaping, the heat flux from the tool to the surface was calculated for the finite element analysis by modeling the tool as a heat source of radiation. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the analysis. The results showed a good agreement with the experiments.