• 전기학회논문지
• /
• 제62권2호
• /
• pp.288-292
• /
• 2013

This paper presents the result of life-cycle cost (LCC) estimation for domestic products propulsion control system (motor block unit) of KTX-1 considering periodic maintenance. Life cycle costing is one of the most effective approaches for the cost analysis of long-life systems such as the KTX-1. Life cycle costing includes the cost of concept design, development, manufacture, operation, maintenance and disposal. To estimate LCC for domestic products motor block unit, it was analyzed physical breakdown structure (PBS) on motor unit in view of maintenance cost and unit cost etc. As a results, life cycle cost on motor block unit increased moderately expect for periodical time when major parts are replaced at the same time. hereafter this results will be reflected in the domestic products being developed.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.222.1-222.1
• /
• 2003

This study was carried out to investigate the quality control of domestic and imported Puerariae Radix. It was analyzed by HPLC using ${\mu}$-Bondapak C$\sub$18/ column with 35% MeOH containing 1% CH$_3$3CO$_2$H system as the mobile phase at UV 254nm. Good linearity showed over the range of 10 to 200$\mu\textrm{g}$/$m\ell$(r$^2$=1) for Puerarin, and 0.5 to 10$\mu\textrm{g}$/mg(r$^2$=0.9999) for Daidzein. The average contents of Puerarin and Daidzein were 5.5${\pm}$1.2%(Domestic), 5.3${\pm}$0.7%(Imported), and 0.05${\pm}$0.02%(Domestic), 0.08${\pm}$0.02%(Imported).The average recovery rates of Puerarin and Daidzein were 101.8${\pm}$1.9% and 97.2${\pm}$0.7%, respectively.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of International Convention of the Pharmaceutical Society of Korea
• /
• pp.257.1-257.1
• /
• 2001

• 환경위생공학
• /
• 제13권2호
• /
• pp.115-120
• /
• 1998

This Study was performed to investigate the contents of aflatoxin $B_{1}$ in cereal, pulse, nuts and these products of domestic and import. These results were as follows. 1. Average concentration(in ${\mu}g/kg$) of aflatoxin $B_{1}$ in domestic foods were 2.6 in cereal, 3.9 in pulse, 4.2 in nuts and 1.4 grain products. The contents of aflatoxin B$_{1}$ in pulse and nuts were much higher than those of cereal and grain products. But their values were still within $10{\mu}g/kg$ the maximum residual level of aflatoxin $B_{1}$ for food of Korea. 2. Average contents of aflatoxin $B_{1}$ in import foods were 4.8, 5.4, 6.0, $3.8{\mu}g/kg$ for cereal pulse , nuts and popcorn & peanuts butter, respectively. And these values were found to be below the maximum residual level ($10{\mu}g/kg$) of aflatoxin $B_{1}$ for food of Korea. 3. The concentration of aflatoxin $B_{1}$ in 2 samples of domestic and 9 samples of import foods were over the tolerance limit for aflatoxin $B_{1}$ in food of Korea. Therefore, the hygienic managements of the foods should be required during storage and circulation at market.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.44-60
• /
• 2001

The purpose of this study is to present suggestions to improve the problems the domestic department stores face by analyzing and comparing the status of the development of PB which is absolutely critical for the specialized domestic department stores to survive, and to search for the future course which may lead to boosting sales and profit by developing the strategic PB products. Selected for this study were atotal of 20 PB's out of domestic as well s foreign PB's in the 4 big department stores. The data were analyzed with SAS package employed as per the by items frequency, percent, mean and standard deviation. From the above study, following viewpoints can be taken into account for the future development of PB ; First, the active will of the excutive is basically necessary for successful development of PB, by relying on long-term investment. Second, the existing mid or low-price goods should be in line with the mid or high price one's development for domestic merchandising with focus on middle or high class society. Third, the stock burden, biggest problem of PB, can be solved by discount policy at optimum prices and success rate of merchandising prediction.

• 디자인학연구
• /
• 제6권1호
• /
• pp.23-46
• /
• 1993

The development of technology in modern industrial world which grows and changes every day is shortening the cycle of life span of products, so there is a flood of products around us. It is enough to say that this phenomenon leads to further emphasis on the aspect of design for human being. It is not a new fact that to design for the rational function and the modeling from to make a combination and to satisfy consumers' desire is a short cut to gain competitive superiority in developing new products for MIS security. Therefore the design which plays a leading role in the activity of creating more convenient, more aesthetic, and more econemical products is called 'NEW CORPORATE WEAPON'. The amount of effort made for developing products is different in each company, but recently the plan to develope new products and its process arouse more interest. This thesis purports to improve objective understanding about the development of design by investigating products development research and the process of analysis and designing as a case study on developing a domestic supersonic humidifier. This thesis consists of five chapters in all. In chapter one as a preface, the purpose the method and the scope of the study is described. Chapter two contains my effort to grasp the background of study on the design and the basic structure of supersonic humidifier. Chapter three is an examination into the present conditions of supersonic humidifier used in domestic and foreign area, and the shape of design. In chapter four, a guide for the development of design is established. The idea sketch based on a fundamental shape and the drawing are added to this. In chapter five on the basis of the result of analysis in the preceding research I describe the development of design of products on the premise that marketing gives proof for them but the products oriented by manufacturer are not included in this case. In this thesis, I try to recognize the process of the develpment of design and the importance of the plan for design in developing products by examining an investigative and analytic study on the design of products.

• 복식문화연구
• /
• 제24권3호
• /
• pp.287-300
• /
• 2016

The purpose of this study was to review materials that could provide basic data about sports brassieres. In this study, 486 sports brassieres were collected online from 31 brands between November 2015 and February 2016. First, the comparison of compression and encapsulation in sports brassieres identified many different styles. The characteristics of compression brassieres included a cut cup, the front center height of a full cup, round neckline, short front hem, all in one shoulder strap with a patterned racerback design, all in one closure, no wire, and separation cup styles. The characteristics of encapsulation brassieres included a V-shape neckline, mixed round shoulder strap design, back closure, and all in one cup. Second, the comparison of domestic and international sports brassieres sorted the items differently. The characteristics of domestic products included compression brassieres, non-cut cup, the front center height of a full cup, round neckline, short front hem, an all in one shoulder strap with a patterned round design, all in one closure, no wire, and a separation cup. The characteristics of international products included a cut up, racerback shoulder strap design, and an all in one cup. Third, the analysis of domestic and international sports brassieres sizes found that six options were available for domestic compression sports brassieres and nine sizes were available for international products. Domestic encapsulation sports brassieres offered five under bust sizes and five cup sizes. International products offered eight under bust sizes and sixteen cup sizes.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.53-59
• /
• 2017

Wooden dowels are commonly used to join the particleboard members together in many types of structures, But little information is available concerning their holding properties in domestic particleboard. This study was performed to determine the withdrawal loads and strengths on the effect of diameter of dowel and hole clearance. The test block was manufactured from 15 mm thick domestic particleboard. The dowel was manufactured 6, 8 and 10 mm diameters from korean castanea, korean pine and tuliptree. Research reported here indicates that withdrawal loads increase, but withdrawal strengths decrease, as the dowel diameter increases. This study also indicates that dowel withholding load and strength for particleboard less decrease than those for domestic wood as a hole clearance decreases.

• 복식문화연구
• /
• 제32권1호
• /
• pp.86-107
• /
• 2024

Although interest in eco-friendly fashion products is increasing among scholars and industry leaders, the concept of eco-friendly products remains unclear, preventing consistent assessment of which fashion products are eco-friendly. This study conducted a content analysis of eco-friendly product information from 87 domestic and 102 foreign brands to reveal key standards for categorizing eco-friendly fashion products. Product characteristic information was coded according to the four material-based standards (i.e., organic material, regenerative material, alternative material, and sustainably produced/upcycled material). Consistency between coders was confirmed by Cohen's kappa. In results, eco-friendly fashion products are categorized by four material-based standards and two certification standards (i.e., certified, not certified). Among the four material-based categories, the greatest number of domestic and foreign companies produced eco-friendly products that were classified as the regenerative material group. In addition, companies acquired eco-friendly certifications related to the use of organic, regenerative, and alternative materials. The greatest number of eco-friendly material brands used for eco-friendly fashion products belonged to the regenerative material group. Based on the study results, a typology of eco-friendly products was suggested. This typology can benefit practitioners and academics by highlighting a need for classification system for the eco-friendly fashion products, as well as by providing insight into the categorization of eco-friendly fashion products.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.