• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.351-360
• /
• 2002

The Korean fresh pork loins in vacuum packaged were obtained from three different Korean export companies and investigated for microbiological and sensory properties. The fresh pork loins were stored at 2$^{\circ}C$ for 50 days and analyzed with an interval of 5$\sim$10 days. The results were as follows: The overall numbers of total plate counts and coliform bacteria were higher in swab method than in meat sampling method. The total plate counts in the loins from the company I were maintained low levels ($\prec$10$^5$ cfu/$cm^2$ or $\prec$10$^5$ cfu/g) for entire storage periods(50 days at 2$^{\circ}C$), whereas the loins from the company III had high levels when they were compared to the domestic standard for the allowance limit. The samples from the company III showed that total plate counts were over 106 after about 30 days when determined by meat sampling method and total plate counts were over 106 after 15 days when determined by swab method. The overall numbers of coliform bacteria were also significantly lowest in the samples from the company I, whereas they were highest in the company III. Therefore, all meat companies will have to make an effort to prevent bacterial contamination in each stage such as slaughtering, marketing and consumer in order to ensure the production of safe meat and the extension of shelf-life. For fresh products, scores of intramuscular fat were higher in samples form the companies II and III than those from the company I when visibly evaluated with the standard. There were no significant differences in scores of meat color, drip and fresh meat flavor. However, the samples from the company I had the lowest score of off-flavor and highest score of overall acceptability. For cooked products, there were no significant differences in meat flavor, off-flavor, juiciness and overall acceptability.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.88-94
• /
• 2014

Among pre-harvest environmental factors, increasing attention has been paid to the effects of chemical and microbiological factors on fresh produce. The occurrence and prevalence of these factors have been usually studied with regard to the final products at the post-harvesting stage and/or when they are sold in the market. However, the origin and routes of transmission of both factors remain to be clarified. In the present study, we examined the contamination levels of food-borne pathogens and chemical factors such as pesticide residues and heavy metals in 83 and 43 samples, respectively, including various soil, water, and fertilizer samples, as well as post-harvested and processed samples. Among the organic farming samples, only one pesticide, dimethomorph, was detected in the soil sample, however no pesticides were observed from any other samples in organic farming system. Thus, it was thought that might be contaminated from conventional farm land in the vicinity. Whereas many pesticide residues were detected in conventional farming systems such as soil, fertilizer, water, and fresh produce as expected. Furthermore, heavy metals detected from all tested samples did not shown contamination levels higher than the standard limit. We comparatively assessed the levels of contamination by food-borne pathogens on the samples from organic and conventional farming systems, and found aerobic bacteria at approximately 7 log CFU/g, with no significant differences observed between the two systems. Coliforms were present at lower levels than aerobic bacteria. No human pathogens were present among the coliforms detected, indicating that these bacteria are saprophytes without the ability to cause food-borne illnesses. In contrast, among the high-risk food-borne pathogens, only sporadic cells of Bacillus cereus were found on samples of organic farming system. These data extend previous findings that the most prevalent food-borne pathogen is B. cereus and demonstrate that it spreads to whole living plants via soil.

• Clinical and Experimental Pediatrics
• /
• v.48 no.10
• /
• pp.1107-1115
• /
• 2005

Purpose : An outbreak of ESBL-producing Shigella sonnei enteritis was unprecedented not only in Korea but throughout the world in the past. We intended to devise a management guideline for ESBL-producing shigellosis based on analysis of clinical manifestations and response to therapy. Methods : We analyzed 103 patients who were admitted to the hospital with acute GI symptoms and were shown positive result for S. sonnei on stool culture. We performed sensitivity test to the antibiotics and DNA sequencing of ESBL gene in the isolated S. sonnei colonies. In addition, we retrospectively analyzed their clinical characteristics, laboratory results, and clinical and microbiological responses to the antibiotics. Results : Among the clinical manifestations, fever was the most frequent(96.1%), followed by diarrhea(93.2%), abdominal pain(76.7%), headache(71.8%), vomiting(65.0%), and nausea(41.7%). The fever was sustained for average of 2.0 days and diarrhea for 3.9 days. Watery diarrhea was the most common(69%) followed by mucoid(26%), and bloody stool(5%). On peripheral blood smear, leukocytosis was noted in 53.4% of patients, and 78.6% of patients tested positive for serum CRP response. On stool direct smear, 11.7% of patients showed more than 50 WBCs/HPF, and 9.7% of patients between 5 to 20 WBCs/HPF. Stool occult blood was positive in 71% of patients. Production of CTX-M-14 type ESBL was reported for all S. sonnei strains isolated from this outbreak. Microbiological eradication rates to various antibiotics were as follows : 100%(9/9) to ciprofloxacin, 100% 5/5) to azithromycin, 6.9%(5/72) to cefdinir, 0%(0/8) to ceftriaxone, 12.5%(1/8) to ceftizoxime, 0%(0/ 8) to TMP/SMX, 42.9%(3/7) to ampicillin/sulbactam, 20%(1/5) to amoxicillin/clavulanic acid, and 68.8 %(11/16) to imipenem/cilastatin. Conclusion : It is presumed that azithromycin can be an attractive option for the treatment of ESBL-producing S. sonnei enteritis in pediatric population, given its cost-effectiveness and safety. Although ciprofloxacin is another cost-effective agent, its use in pediatric population may be a bit too premature.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.374-380
• /
• 2015

The quality characteristics of the woodpellet manufactured from two domestic pines (Pinus densiflora S. et Z. and Pinus rigida Mill.) were investigated for the efficient energy use of woody biomass resources. Properties of woodpellets such as moisture content, heating value, ash content, apparent density and durability were determined by using the standard test method of woodpellets of Korea Forest Research Institute (KFRI) and elemental analysis. The results of elemental analysis for C, H, O and N showed 61.42% carbon, 5.56% hydrogen, 32.87% oxygen, and 0.15% nitrogen for Pinus densiflora S. et Z. and 61.03% carbon, 5.96% hydrogen, 32.83% oxygen, and 0.18% nitrogen for Pinus rigida Mill. No significant difference between Pinus densiflora S. et Z. and Pinus rigida Mill was observed on elemental analysis. Heating values of each woodpellet were ranged from 19.00 to 19.42 MJ/kg which satisfied the first grade quality standard (${\geq}18.0MJ/kg$) by KFRI. The ash contents of woodpellet were slightly different between Pinus densiflora S. et Z. and Pinus rigida Mill., and satisfied the first grade quality standard (${\leq}0.7%$) by KFRI. Apparent density of woodpellet (Pinus densiflora S. et Z.) was passed the first grade standard level (${\geq}640kg/m^3$), and woodpellets from Pinus rigida Mill. satisfied the second grade quality of the standard. The moisture contents of each woodpellet were satisfied by the first grade quality standard (${\leq}10%$). The durability of woodpellet (Pinus densiflora S. et Z.) was passed the third grade level (${\geq}95%$), but Pinus rigida Mill. woodpellet was insufficient to satisfy the quality standard.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.177-214
• /
• 2016

During more than 20 years of practice, Civil Aviation Law has experienced three times of amendments since it was enacted in 1995. But these revisions are limited to the technical level. The problems and limitations have become increasingly prominent in its implementation. Firstly, the civil aviation law is the result of interests game among several departments and some legal issues was left behind and the regulation was very vague as a result. Secondly, the process of aviation legislation is the process that the country has undergone profound changes and social transformation. The 20 years is long enough for the society to undergo tremendous changes and 1995 version of civil aviation law does not keep pace of development of economy. There was a serious lag between reality and the law. In order to actively promote the development of the aviation industry and overcome implementation issues of the Civil Aviation Law, Civil Aviation Administration of China (CAAC) initiated modification procedure the law and published new draft of Civil Aviation Law in August 2016. The spirit of this modification is to learn and absorb new achievements of domestic and foreign legislation and the International Convention on civil aviation. Furthermore, the purpose of the revision is to provide favorable policy for the development of civil aviation industry and improve aviation safety and supervision, strengthen and protection of consumer rights and interests, to enhance the safety of civil aviation activities, and promote the development of general aviation. This revision concerned to the 78 articles which are revised or deleted and 24 articles added. The highlights of the draft include but not limited to the enhancement of security management, clarification of the main responsibility for production safety. And also it added the provisions related to the construction of effective tracking capability of public air transport enterprises and license system on the transport of dangerous goods. Compared with the existing civil aviation law, the draft has made a great improvements. But there are several deficiencies and limitations in the drafts. These problems need to be supplemented and perfected through further amendments in near future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.191-200
• /
• 2017

Proper packaging design can meet both the environmental and economic aspects of packaging materials by reducing the use of packaging materials, waste generation, material costs, and logistics costs. Finite element analysis(FEM) is used as a useful tool in various fields such as structural analysis, heat transfer, fluid motion, and electromagnetic field, but its application in the field of packaging is still insufficient. Therefore, the application of FEM to the field of packaging can save the cost and time in the future research because it is possible to design the package by computer simulation, and it is possible to reduce the packaging waste and logistics cost through proper packaging design. Therefore, this study investigated the FEM papers published in Korea for the purpose of helping research design using FEM program in the field of packaging in the future. In this paper, we analyzed the 29 papers that were directly related to the analysis of FEM papers published in domestic journals from 1991 to 2017. As a result, we analyzed the research topic, FEM program, and analysis method using each paper, and presented the direction that can be applied in future packaging field. When the FEM is applied to the packaging field, it is possible to change the structure and reduce the thickness through the stress and vibration analysis applied to the packaging material, thereby reducing the cost by improving the mechanical strength and reducing the amount of the packaging material. Therefore, in the field of packaging research in the future, if the FEM is performed together, economical and reasonable packaging design will be possible.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2005

To find out temporal variations of net photosynthetic rate (NPR) of intertidal flats, we measured oxygen microprofiles in sediments with oxygen microsensors 4 times from December 2003 to June 2004. The study areas were the intertidial flats in Janghwa-ri and Dongmak-ri, located on the southwestern and the southern parts of Ganghwa-gun, respectively, and in Incheon North Harbor where the content of organic matter was relatively high. During the investigation, oxygen penetration depths in the tidal flats of Janghwa-ri and Dongmak-ri were high in December (mean values of 4.0-4.1 mm). Thereafter, the oxygen penetration depths declined to mean values of 2.2-2.8 mm and 1.6-1.8 mm in the two tidal flats. Interestingly, the oxygen penetration depths in the Incheon North Harbor tidal flat showed a lower range $(0.8{\pm}0.3\;mm;\;mean{\pm}1SD)$ over the period. The maximum NPR in the Dongmak-ri tidal flat was found in March $(11.1{\pm}2.8\;mmol\;O_2\;m^{-2}\;h^{-1})$, and those In Janghwa-ri $(6.1{\pm}4.1\;mmol\;O_2\;m^{-2}\;h^{-1})$ and Incheon North Harbor $(6.4{\pm}1.4\;mmol\;O_2\;m^{-2}\;h^{-1})$ were observed in May. During the period when NPR was most active, the highest oxygen concentration was found at 0.1-0.5 mm depth below the surface sediment, and was on average 1.8-3.2 times higher than the air-saturated oxygen concentration in the overlying seawater. Although we took into account of low in situ light intensity $(400{\mu}Einst\;m^{-2}\;s^{-1})$ during the investigation in June, NPR in the 3 study areas decreased significantly to less than $0.2\;mmol\;O_2\;m^{-2}\;h^{-1})$. Thus, temporal variations of NPR were somewhat different among the tidal flats. Generally, benthic primary producers inhabiting in the uppermost 0.5 mm of the sediment showed a peak photosynthetic activity in the study areas in spring. This is the first domestic report on photosynthetic rates of benthic microflora in the tidal flats with oxygen microsensors, and the use of the microsensor can be widely applied to measurements of benthic primary production of a tidal flat and the oxygen consumption rate of surficial sediments.

• Hwankyungkyoyuk
• /
• v.7 no.1
• /
• pp.46-87
• /
• 1994

Our country has been consuming a huge amount of energy in the course of industrialization and its demand is expected to increase enormously in the future. However, the deposits of energy resources are so limited that the settlement of energy problem comes up the essential subject. To solve the energy problem, it is requested that new resources to gain energy stably should be developed and also energy should be economized and used effectively. The effective use of energy and an the wisdom of economy in energy are requested to everybody and these things should be habitualized from very young age through education. Nevertheless, almost every school in our country hasn’t been concerned about energy education. Even though they have a concern, they are very short of the energy education materials and the quality of the materials is not so good. Therefore it is very meaningful to the settlement of energy problem of the country to make the students who will lead our country to make the students who will lead our country in the future realize the seriousness of energy problem and to provide them the necessary knowledge and methods to solve this problem so that they practice those things in everyday life. Having these necessities, this research, supported by The Korea Energy Management Corporation(KEMCO), was performed for 8 months from April 17, 1994 to December 17, 1994. Many peoples participated in this study such as 30 staffs of researchers and authors, 5 staffs of photographers and illustrators, and 3 VCR program producers developing an energy education material set for middle school students that includes a printed material for student, a diskette for computer simulation, a teacher's guidebook, VCR material and its guidebook. The following main development direction was established : First, the material for student should be consisted of units that let students know the seriousness of energy problem. Second, the focus should be put on the necessary method and practice to economize energy actually in real life based on the basic knowledge learned in elementary school. Third, material for student should be consisted of modules to be student activity-oriented teaching-learning rather than lecture-oriented one. The activity, to maximize student's interests, should be presented in various forms such as experiments, investigation, play, data interpretation, computer simulation, visits, expression and appreciation, etc. To develop the energy education materials for middle school students, a research plan was made first. After literature review about domestic and foreign energy education materials, several research trips home and abroad, and discussion meetings, the basic theory of energy education such as the principle, objective, contents, teaching-learning method, and evaluation method was established. Material for student was developed through the following procedures : The activities in the existing energy education materials were analysed and were divided into four categories related to energy using places of home, school, community, and country, and which were again divided into three categories related to time of past, present, and future, Considering these division, nine modules which are structure units of material for student were chosen, Each module comprises 2-4 activities. Totally 31 activities were designed in this way. The syllabi were made out for each activity and writing was asked for to experts related to each activity after several discussions and revision. To complement the draft, another several discussions and revision were also made on it and then pictures and illustrations were asked for. All these procedures complete the material for student, titled ; Energy Inquiry of Middle School Students', which totals 129 pages and is all in color. As the manuscript of material for student was fixed, writing for teacher's guidebook was asked for to the same writers. The draft of teacher's guidebook was also complemented through the several concentrated works and discussions. Teacher's guidebook focused on the teaching-learning principle and methods of energy education and on the concrete instruction cases for effective instruction of material for student. It is organized with two parts : the one is 'general outline' which introduces theoretical contents and the other is 'details' which are practically helpful to teaching-learning. It is totally 131 pages including both 'general outline' and 'details'. The VCR material and its guidebook consist of contents that cultivate the good attitude trying to economize energy and raise student's interests with a purpose of strong motivation to recognize the necessity of economy and practice it. After establishing development direction of VCR material through discussion meetings and research trips, its script was made by relevant experts. Then the script was also reviewed two times. The drafted VCR material made by a video material developing expert was examined and modified by previews twice. After completion of VCR material, the VCR guidebook was made. All these procedures led to the development of VCR material which runs 20 minutes in VHS type. The VCR guidebook shows a production purpose of the program, structure of contents, evaluation methods, and contents of the program in detail to give help to instructors when they use this VCR material, When these energy education materials are used, it is desirable that the VCR material should be presented first to induce student's motive, and then material for student is introduced Since the material for student is composed of activity-oriented modules and each module is independent one another in general, and each activity is, too. the necessary module or activity can be chosen and utilized in any order according to school or class conditions. This energy education materials will contribute to the development of student's ability to solve energy problem in everyday life and teacher's ability to teach the fundamental knowledge and method in solving energy problem.

• Proceedings of the Technology Innovation Conference
• /
• 1998.06a
• /
• pp.116-127
• /
• 1998

The Necessity of Cyber University. Within the rapidly changing environment of global economics, the environment of higher education in the universities, also, has been, encountering various changes. Popularization on higher education related to 1lifetime education system, putting emphasis on the productivity of education services and the acquisition of competitiveness through the market of open education, the breakdown of the ivory tower and the Multiversitization of universities, importance of obtaining information in the universities, and cooperation between domestic and oversea universities, industry and educational system must be acquired. Therefore, in order to adequately cope wi th these kinds of rapid changes in the education environment, operating Cyber University by utilizing various information technologies and its fixations such as Internet, E-mail, CD-ROMs, Interact ive Video Networks (Video Conferencing, Video on Demand), TV, Cable etc., which has no time or location limitation, is needed. Using informal ion and telecommunication technologies, especially the Internet is expected to Or ing about many changes in the social, economics and educational area. Among the many changes scholars have predicted, the development and fixations of Distant Learning or Cyber University was the most dominant factor. In the case of U. S. A., Cyber University has already been established and in under operation by the Federate Governments of 13 states. Any other universities (around 500 universities has been opened until1 now), with the help of the government and private citizens have been able to partly operate the Cyber University and is planning on enlarging step-by-step in the future. It could be seen not only as U. S. A. trying to elevate its higher education through their leading information technologies, but also could be seen as their objective in putting efforts on subordinating the culture of the education worldwide. UTRA University in U. S. A., for example, is already exporting its class lectures to China, and Indonesia regions. Influenced by the Cyber University current in the U.S., the Universities in Korea is willing .to arrange various forms of Cyber Universities. In line with this, at JUNAM National University, internet based Cyber University, which has set about its work on July of 1997, is in the state of operating about 100 Cyber Universities. Also, in the case of Hanam University, the Distant Learning classes are at its final stage of being established; this is a link in the rapid speed project of setting an example by the Korean Government. In addition, the department of education has selected 5 universities, including Seoul Cyber Design University for experimentation and is in the stage of strategic operation. Over 100 universities in Korea are speeding up its preparation for operating Cyber University. This form of Distant Learning goes beyond the walls of universities and is in the trend of being diffused in business areas or in various training programs of financial organizations and more. Here, in the hope that this material would some what be of help to other Universities which are preparing for Cyber University, I would 1ike to introduce some general concepts of the components forming Cyber University and Open Education System which has been established by JUNAM University. System of Cyber University could be seen as a general solution offered by tile computer technologies for the management on the students, Lectures On Demand, real hour based and satellite classes, media product ion lab for the production of the multimedia Contents, electronic library, the Groupware enabling exchange of information between students and professors. Arranging general concepts of components in the aspect of Cyber University and Open Education, it would be expressed in the form of the establishment of Cyber University and the service of Open Education as can be seen in the diagram below.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.337-343
• /
• 2020

This study was carried out to evaluate the yield of cuttings according to the planting and runner releasing times of mother plants in order to raise the cutting seedlings of raising seedling period 75 days or more needed for forcing culture of strawberries to be transplanted into the field around the 15^th of September. Three domestic cultivars of 'Maehyang', 'Jukhyang', and 'Kuemsil' were tested. For experiment 1 to determine the yield of cuttings with the change of transplanting time, the mother plant were planted on February 28, March 20, and April 9 in 20 days intervals, and the cuttings were collected two to three times from June 4 to July 1. Experiment 2 was conducted to investigate the yield of cuttings depending on the runner releasing time, the runners were released in three intervals of 20 days, 40 days, and 60 days after planting the mother plant on March 5, and the cutting were collected once to three times from May 29 to June 26. From the comparisons of cutting yield according to the transplanting time of mother plants, February 28 treatment was more 9~25% and 114~165% for each cultivar than March 20 and April 9, respectively (Experiment 1). The yield of cuttings with releasing time 20 days after planting the mother plants had higher by 60~77% and 104~176% for each cultivar than 40 days and 60 days, respectively (Experiment 2). From these results, in case of propagating the seedlings from cuttings needed for field planting around September 15, early planting around in the latter part of February is the best for cuttings yield. In addition, releasing after the removal of the runners produced from mother plants by 20 days after planting gives an advantage over higher yield of cuttings. Consequently, this study suggest to apply an efficient raising seedling system for labor saving and quality improvement in raising seedlings of three strawberry cultivars in Korea.