• 한국가구학회지
• /
• 제22권4호
• /
• pp.299-307
• /
• 2011

This article aimed to provide objective and practical information on wood terms of making furniture focusing on the wood species that furniture designers and firms in Korea have used to create furniture from the traditional up to the modern times. Through the content analysis method with wood information from literature related to furniture at home and abroad, studios of making the traditional Korean furniture, domestic furniture firms, and the catalogues of Korean crafts council and Korea furniture society, the wood species of making furniture was studied in the terms showing the number of the species classified in needle leaf tree and broad leaf tree. As a result, the furniture wood terms were analyzed about 230 species including 200 broad leaf tree and 30 needle leaf tree. 74 out of 100 domestic species studied have been used from the traditional up to the modern time for creating the traditional Korean wood furniture. The 230 species were classified by such detailed uses as furniture mainly and the related small objects, interiors, architecture, exteriors, materials like plywood, toys, musical instrument, exercise equipment, household items, and so on. In addition, some of the terms were clarified such as Madika to Jelutong, Karin to Paudauk and Narra, Red sandalwood to Indian rose wood, and Cherry blossoms from home, the same family as Cherry from abroad but the different species, and so on.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.365-374
• /
• 2008

Understanding of the properties of woods is important in wood utilization. Until now, traditional wooden houses(Korean-style house, Buddhist temple, royal palaces) and furniture have been made of domestic woods with the experience of a craftsman rather than the scientific knowledge on woods. Because of concrete-based houses and imported wood products and furniture, even wood craftsmen decrease in number, too. This study was carried out to collect wood samples growing in Korea and to measure wood characteristics. Anatomical, physical and mechanical properties of 37 wood species were investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.24-29
• /
• 1999

가구부재로 사용하기 위해 요구되는 목재 성질들을 변수로 하는 판별분석법을 이용하여 국산 활엽수재들이 현재 국내에서 수입 사용되는 온대산 활엽수재와 열대산 활엽수 집단중 어느 집단과 유사한지를 조사하였다. 조사된 36종의 국산 활엽수종 15종은 온대산 활엽수와 나머지 21 종은 열대산 활엽수와 성질이 비슷한 것으로 나타났다.

• Mycobiology
• /
• 제47권4호
• /
• pp.430-440
• /
• 2019

Fungal contamination of built-in furniture is a frequent problem in Korea when new apartment is built. However, domestic information on the contaminating fungi is very limited. This study was conducted to isolate, identify and characterize the fungi of the problem in one of the apartment houses where the fungi were claimed in the built-in furniture before the house owner moves in. Fungi present in the furniture installed in a main room, dress room, and kitchen side were visually and microscopically confirmed and purely isolated on PDA. The isolated fungi were identified by analyzing the morphological characteristics and nucleotide sequence of the ITS, calmodulin gene, and TEF-1α gene. Aspergillus creber, A. niger, A. pseudoglacus, A. ruber, Cladosporium perangustum and Penicillium commune were identified. Four out of the six fungal species were positive for at least one enzyme in six kinds of extracellular enzyme assays. When these four species (A. creber, A. niger, C. perangustum and P. commune) were inoculated onto four kinds of wood chips of furniture materials, they were able to colonize all of the wood chips. Their settlement was better at 95% humidity condition than at 30% humidity condition. Among the four species, C. perangustum caused the darkest discoloration and secreted the most number of extracellular enzymes. The four species were re-isolated from the colonized wood chips and confirmed as the problematic fungi in the built-in furniture.

• 한국가구학회지
• /
• 제25권1호
• /
• pp.36-44
• /
• 2014

This study was investigated to sensible characteristic and physical characteristic to estimate value of the craft for Pinus densiflora and Pinus densiflora for. erecta Uyeki wood. The sensual characteristics of wood are evaluated by wood figure, wood grain, odor, and the physical characteristics by weathering, abrasion, surface roughness and hardness. The wood figure of these species were observed at flat grain in the radial section and edge grain in the tangential section. Also, burl's figure was observed in Burl of Pinus densiflora wood. Pinus densiflora for. erecta Uyeki wood had volatile aroma compounds such as Camphene, Thymyl ether, ${\alpha}$-Longipinene, etc. Pinus densiflora wood had volatile aroma compounds such as ${\alpha}$-Longipinene, (+)-Cedrol, etc. The moisture soption, abrasion, hardness and roughness were very different between the two species.

• 한국가구학회지
• /
• 제26권3호
• /
• pp.222-228
• /
• 2015

To evaluate the natural decay durability of valuable domestic softwoods which are used for preservative treatment in our country, we carried out decay test by European standard method. Of all test wood species, Japanese larch (Larix leptolepis) showed slightly high natural decay durability compared to other 4 wood species, Japanese red pine (Pinus densiflora), pitch pine (Pinus rigida), Japanese cedar (Cryptomeria japonica), and scots pine (Pinus sylvestris). However, all of evaluated domestic softwood species in this study caused high weight losses over about 30% in heartwood by test fungus, Poria placenta. We can hardly expect a good natural decay durability from these softwood species. According to the classification of the natural durability of European standard (EN 350-1), they are classified into "Not durable" or "Slightly durable". Therefore, if using these softwoods as exterior materials, we must do preservative treatment to ensure durability.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.188-195
• /
• 2010

This study has been focused on the evaluation of domestic softwood timbers to replace imported timbers for woodcrafts and furniture-making. Figures on radial and tangential sections were observed with naked eyes. As the result of study on the figures appeared on the wood surface of 6 species of trees, flat grain and edge grain were clearly found from Taxus cuspidata. Juniperus chinensis and Ginkgo biloba had wavy grain figure and pigment figure, and blister figure was found in Pinus densiflora, Larix kaempferi showed pitch streak and irregular figures on its tangential section due to growth abnormalities. Wavy grain figure appeared weakly on near knot of Pinus koraiensis. The characteristic figures shown from each species of trees are expected to be used for crafts, sculptures, furniture, and interior decoration. They are also considered to have great potential to substitute imported timber sufficiently, which are currently used a lot for wood crafts and furniture-making.

• 한국가구학회지
• /
• 제19권4호
• /
• pp.229-234
• /
• 2008

In a previous study, it was revealed that three major softwoods, Japanese pine, Korean pine and Japanese larch, heat-treated at $220^{\circ}C$, could produce high quality dark-colored boards. It is known that heat treatment decreases the hygroscopicity of wood. The hygroscopicity of major domestic softwoods and hardwoods heat-treated at $220^{\circ}C$ was investigated by a saturated salt solution method and compared with that of black and white charcoals. Equilibrium moisture contents of wood decreased with the increase of heat treatment time. Isotherm shapes of wood species were different from those of charcoals. Heat treatment decreases the equilibrium moisture contents of black locust more than those of Korean pine and Japanese larch. It was found that surface hardness of wood is improved by heat treatment to a certain extent, but a longer heat treatment causes thermal degradation, resulting in the decrease of the surface hardness.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.55-60
• /
• 2000

Liquid ammonia treatment known as the most effective Wood plasticization method, was applied to two typical domestic species, Pinus densiflora, Castanea crenata. Small specimens of 30mm width, 300mm length and two thicknesses, 5 or 10mm, were used. For 5mm thick Specimens, Pinus densiflora was quite well plasticized iker 4 hour liquid ammonia treatment, while Castanea crenata was not plasticized even after 4 hour treatment. Specimens of 10mm thick Pinus densiflora were hardly plasticized, but those with kerfs were bent somewhat easily, With the increase of liquid ammonia treatment time the thermal conductivity of Pinus densiflora increased, while that of Castanea crenata didn't Presteaming before liquid ammonia treatment didn't improve the plasticization of both species.

• 한국가구학회지
• /
• 제28권2호
• /
• pp.111-117
• /
• 2017

Recently, as people's interest in wood has increased, the use of wood as household and landscape decking materials has increased. As the deck material, imported wood such as synthetic wood, Ipe, and Malas was used in addition to the existing preserved wood, but recently deck use has been activated as part of the activation of domestic materials. As an important quality factor in the selection of such decking materials, various durability along with weatherability for long - term use is required for maintenance. Generally used tropical hardwoods have excellent weatherability and durability without additional preservative treatment. However, the domestic larch is a wood species with a higher specific gravity and durability than ordinary conifers. However, it has not yet been used as a deck material due to lack of comparative studies on its characteristics. Therefore, hardness and durability of wood were measured using six specimens of Ipe, Massaranduba, Malas, Douglas-fir, Larch and Torrefied-Larch. Density Profile was used to measure the density, and Brinell hardness test and resistance test against momentary impact were carried out for the test of resistance to static load. Also, The hardness and durability of wood were measured by castor test with resistance test against dynamic load, as well as, nail down test by experiment on surface hardness and durability. As a result of the experiment, the hardness was increased in proportion to the density, and it was confirmed that the imported lumber was harder and durable than the domestic larch.