• 대한미생물학회지
• /
• 제34권6호
• /
• pp.561-571
• /
• 1999

Diagnosis of mycobacterial infection is dependent upon the isolation and identification of causative agents. The procedures involved are time consuming and technically demanding. To improve the laborious identification process mycobacterial systematics supported by gene analysis is feasible, being particularly useful for slowly growing or uncultivable mycobacteria. To complement genetic analysis for the differentiation and identification of mycobacterial species, an alternative marker gene, rpoB encoding the ${\beta}$ subunit of RNA polymerase, was investigated. rpoB DNAs (342 bp) were amplified from 52 reference strains of mycobacteria including Mycobacterium tuberculosis H37Rv (ATCC 27294) and clinical isolates by the PCR. The nucleotide sequences were directly determined (306 bp) and aligned using the multiple alignment algorithm in the MegAlign package (DNASTAR) and MEGA program. A phylogenetic tree was constructed with a neighborhood joining method. Comparative sequence analysis of rpoB DNA provided the basis for species differentiation. By being grouped into species-specific clusters with low sequence divergence among strains belonging to same species, all the clinical isolates could be easily identified. Furthermore RFLP analysis enabled rapid identification of clinical isolates.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.284-292
• /
• 2008

The active control technique mostly uses the least-mean-square(LMS) algorithm, because the LMS algorithm can easily obtain the complex transfer function in real-time, particularly when the Filtered-X LMS(FXLMS) algorithm is applied to an active noise control(ANC) system. However, FXLMS algorithm has the demerit that stability of the control is decreased when the step size become larger but the convergence speed is faster because the step size of FXLMS algorithm is fixed. As a result, the system has higher probability which the divergence occurs. Thus the Co-FXLMS algorithm was developed to solve this problem. The Co-FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Co-FXLMS algorithm is presented in comparison with the FXLMS algorithm. Simulation and experimental results show that active noise control using Co-FXLMS is effective in reducing the noise in duct system.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.141-149
• /
• 1999

어느 한 계가 양수의 발산지수(Lyapunov exponent)를 가질 때 이 계는 카오스계로 분류되며 그 동특성은 예측이 불가능해 진다. 감쇠 기계계(소산계)에서는 위상공간(phase space)의 초기 부피가 시간에 따라 수축한다. 발산 지수들의 합은 음수이며 그 기계계의 감쇠와 관련되며, 따라서 발산지수들의 합은 감쇠의 변화를 감시하는데 사용되어질 수 있다. 그러나 그 감쇠변화를 감시하기 위해서는 발산지수를 계산하는데 사용하는 신호(data) 부분(segment)이 짧아야 한다. 이는 문제점을 야기시키는데 그 이유는 발산지수가 아주 많은 양의 발산률(divergence rate)의 평균으로서 구해지기 때문이다. 이 문제를 극복하기 위해서, 본 저자는 '순간발산지수(Instantaneous Lyapunov Exponent)'를 도입하였으며, 이 순간발산지수들의 합이 어떻게 기계계의 감쇠와 관련되어지는 가에 대하여 기술하였다. 미분방적식과 시계열(time series)을 이용한 컴퓨터 시뮬레이션은 '순간발산지수들의 합'의 중요성을 입증하였다. 그러나 시계열(또는 실험신호)로 부터의 정확한 순간발산지수를 측정하기는 매우 힘들기 때문에 '부분발산지수(Short term averaged Lyapunov Exponent)'를 또한 도입하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.484-492
• /
• 2011

Power system analyses, which involve the handling of massive data volumes, necessitate the use of effective visualization methods to facilitate analysis and assist the user in obtaining a clear understanding of the present state of the system. This paper introduces an interface that compensates for the limitations of the visualization modules of dynamic security assessment tools, such as PSS/e and TSAT, for power system variables including generator rotor angle and frequency. The compensation is made possible through the automatic provision of dynamic simulation data in visualized and tabular form for better data intuition, thereby considerably reducing the redundant manual operation and time required for data analysis. The interface also determines whether the generators are stable through a generator instability algorithm that scans simulation data and checks for an increase in swing or divergence. The proposed visualization methods are applied to the dynamic simulation results for contingencies in the Korean Electric Power Corporation system, and have been tested by power system researchers to verify the effectiveness of the data visualization interface.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.598-603
• /
• 2007

The active control technique mostly uses the Least-Mean-Square (LMS) algorithm, because the LMS algorithm can easily obtain the complex transfer function in real-time, particularly when the Filtered-X LMS (FXLMS) algorithm is applied to an active noise control (ANC) system. However, FXLMS algorithm has the demerit that stability of the control is decreased when the step size become larger but the convergence speed is faster because the step size of FXLMS algorithm is fixed. As a result, the system has higher probability which the divergence occurs. Thus the Co-FXLMS algorithm was developed to solve this problem. The Co-FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Co-FXLMS algorithm is presented in comparison with the FXLMS algorithm. Simulation results show that active noise control using Co-FXLMS is effective in reducing the noise in duct system.

• 전자공학회논문지
• /
• 제52권8호
• /
• pp.148-155
• /
• 2015

Levenberg-Marquardt은 최소자승법 문제의 풀이법으로 잘 알려져 있다. 하지만 이전의 표적기동분석(TMA)의 추적필터의 경우 대부분 Gauss-Newton방법을 사용하고 있으며 Gauss-Newton은 역행열 연산이 요구되어 시스템을 불안정하게 만드는 문제점이 있다. 본 논문에서는 Gauss-Newton의 수치적 불안정성을 해결하기 위해 TMA에 Levenberg-Marquardt을 적용하여 Levenberg-Marquardt이 적용된 표적기동분석 알고리즘의 안정성을 실험으로 보인다. 이를 위해 실험에서는 Monte-Calro 시물레이션을 3개 시나리오에 대하여 수행하였으며 그 결과 Levenberg-Marquardt이 Gauss-Newton에 비하여 표적기동분석 결과인 거리, 침로, 속력의 수렴되는 시간이 빨라졌으며 행렬의 발산빈도가 저하되어 표적기동분석 결과가 안정화되었다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.1-13
• /
• 2004

A scanning stereo-PIV system was developed to measure the three-dimensional distribution of three-component velocity in a turbulent round jet. A laser light beam produced by a high repetition rate YLF pulse laser was expanded vertically by a cylindrical lens to form a laser light sheet. The light sheet is scanned in a direction normal to the sheet by a flat mirror mounted on an optical scanner, which is controlled by a programmable scanner controller. Two high-speed mega-pixel resolution C-MOS cameras captured the particle images illuminated by the light sheet, and stereoscopic PIV method was adopted to acquire the 3D-3C-velocity distribution of turbulent round jet in an octagonal tank filled with water. The jet Reynolds number was set at Re=1000 and the streamwise location of the measurement was fixed at approximately x = 40D. Time evolution of three-dimensional vortical structure, which is identified by vorticity, is visualized. It revealed that the existence of a group of hairpin-like vortex structures was quite evident around the rim of the shear layer of the jet. Turbulence statistics shows good agreement with the previous data, and divergence of a filtered (unfiltered) velocity vector field was $7\%\;(22\%)$ of root-me an-squared vorticity value.

• 천문학회지
• /
• 제34권4호
• /
• pp.333-335
• /
• 2001

We study the properties of supernova (SN) driven interstellar turbulence with a numerical magnetohydrodynamic (MHD) model. Calculations were done using the RIEMANN framework for MHD, which is highly suited for astrophysical flows because it tracks shocks using a Riemann solver and ensures pressure positivity and a divergence-free magnetic field. We start our simulations with a uniform density threaded by a uniform magnetic field. A simplified radiative cooling curve and a constant heating rate are also included. In this radiatively-cooling magnetized medium, we explode SNe one at a time at randomly chosen positions with SN explosion rates equal to and 12 times higher than the Galactic value. The evolution of the system is basically determined by the input energy of SN explosions and the output energy of radiative cooling. We follow the simulations to the point where the total energy of the system, as well as thermal, kinetic, and magnetic energy individually, has reached a quasi-stationary value. From the numerical experiments, we find that: i) both thermal and dynamical processes are important in determining the phases of the interstellar medium, and ii) the power index n of the $B-p^n$ relation is consistent with observed values.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.93-101
• /
• 1985

다양한 채널 길이와 임의의 인가전압하의 MOS 트랜지스터를 2차원적으로 시뮬레이션 하기 위한 프로그램(SOMOS)을 제작하였다. Poisson의 방정식에 대하여는 Newton방법을, 연속방정식에 대하여는 발산정리를 이용하여 기본 수식들에 대한 유한차등법(FDM)에 따른 수식을 전개하였으며, 선형화된 수식의 해는 SOR 방법과 Cummel의 알고리즘을 이용하여 구했다. 하난의 동작상태의 소자를 시뮬레이션 하기 위한 시간은 VAX 11/780 컴퓨터를 사용했을때 인가전압 상태에 따라 30초 내지 4분 정도가 소요되었다. 인가전압과 전위분포에 따라 자동적으로 생성되는 그리드는 비균일한 간격을 가지며 필요에 따라 자동적으로 개선된다.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.11-19
• /
• 1994

The matching probability P(ο/$\lambda$), of the signal sequence(ο) observed for a finite time interval with a HMM (Hidden Markov Model $\lambda$) indicates the probability that signal comes from the given model. By utilizing the fact that the probability represents matching score of the observed signal with the model we can recognize an unknown signal pattern by comparing the magnitudes of the matching probabilities with respect to the known models. Because the algorithm however uses floating point variables during the computing process hardware implementation of the algorithm requires floating point units. This paper proposes an integer algorithm which uses positive integer numbers rather than float point ones to compute the matching probability so that we can economically realize the algorithm into hardware. The algorithm makes the model parameters integer numbers by multiplying positive constants and prevents from divergence of data through the normalization of variables at each step. The final equation of matching probability is composed of constant terms and a variable term which contains logarithm operations. A scheme to make the log conversion table smaller is also presented. To analyze the qualitive characteristics of the proposed algorithm we attatch simulation result performed on two groups of 10 hypothetic models respectively and inspect the statistical properties with repect to the model order the magnitude of scaling constants and the effect of the observation length.