• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1988.10a
• /
• pp.24-29
• /
• 1988

In this paper, it is proposed hew the rigid element method suggested in the first paper can be applied to the elastic and elasto-plastic analysis of spherical shell with the open stiff ring. In the analytical model, the solution domain is divided into rectangular-shaped spherical bending elements. Each contact surface of two adjacent elements is interconnected with four elastic springs, and it is assumed that the internal forces are distritributed into springs. The 6 degrees of freedom of the element are placed in the center of elements, and the 6 cen-teroidal rigid displacements affect other elements through springs around elements. And then the solution domain is estimated by the behavior of elements and springs. In this study, these concepts are applied to the elastic and elasto-plastic analysis for the eight cases of the spherical shell according to the condition of stiff ring, the condion of loading and the size of opening. And then some numerical results such as the distribution of stresses, the force-displacement curves and the mode of fractures will he shown.

• Geomechanics and Engineering
• /
• v.33 no.4
• /
• pp.369-380
• /
• 2023

The aim of this paper is to investigate stress analysis of semi-infinite soils consisting of two layers with twin rectangular tunnels under static loads. The region close to the ground surface and tunnel modelled within finite elements. In order to use a more realistic model, the far region is modelled within infinite elements. The material model of the layered soil is considered as elastic and isotropic. In the finite element solution of the problem, two dimensional (2D) plane solid elements are used with sixteen-nodes rectangular finite and eight-nodes infinite shapes. Finite and infinite elements are ordered to be suitable for the tunnel and the soils. The governing equations of the problem are obtained by using the virtual work principle. In the numerical process, the five-point Gauss rule is used for the calculation of the integrations. In order to validate using methods, comparison studies are performed. In the numerical results, the stress distributions of the two layered soils containing twin rectangular tunnels presented. In the presented results, effects of the location of the tunnels on the stress distributions along soil depth are obtained and discussed in detail. The obtained results show that the locations of the tunnels are very effective on the stress distribution on the soils.

• Journal of Distribution Science
• /
• v.22 no.4
• /
• pp.47-58
• /
• 2024

Purpose: Achieving organizational effectiveness is the ultimate goal that every business entity or institution targets. To achieve this, organizations need to consider various factors that have an impact on their performance. This article analyzes the distribution influence of six main elements that have a central role in shaping sustainable organizational effectiveness, which are organizational culture, job satisfaction, interpersonal communication, talent management, knowledge management, and information technology. Research Design Data and Methodology: This research uses a quantitative approach, focusing on manufacturing companies located in Surabaya as the main object, involving twenty manufacturing companies as research targets, and 10 employees in each company. The sample selection process was carried out through the application of random sampling techniques. The analysis in this research uses the multiple linear regression method and uses SPSS version 26 software. Results: Distribution of six major factors used in this research are related to each other and contribute significantly to overall organizational effectiveness. Conclusion: Organizations that can combine the distribution of a positive culture, prioritize employee satisfaction, encourage effective communication, manage talent and knowledge efficiently, and utilize information technology wisely will have greater potential to achieve their goals and survive in the intensely competitive business environment.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.473-494
• /
• 2015

A graded harmonic finite element formulation based on three-dimensional elasticity theory is developed for the structural analysis of 2D functionally graded axisymmetric structures. The mechanical properties of the axisymmetric solid structures composed of two different metals and ceramics are assumed to vary in radial and axial directions according to power law variations as a function of the volume fractions of the constituents. The material properties of the graded element are calculated at the integration points. Effects of material distribution profile on the static deformation, natural frequency and dynamic response analyses of particular axisymmetric solid structures are investigated by changing the power law exponents. It is observed that the displacements, stresses and natural frequencies are severely affected by the variation of axial and radial power law exponents. Good accuracy is obtained with fewer elements in the present study since Fourier series expansion eliminates the need of finite element mesh in circumferential direction and continuous material property distribution within the elements improves accuracy without refining the mesh size in axial and radial directions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.479-486
• /
• 1986

It is necessary to consider a rotor movement in dynamic analysis on the flux distribution of electric machinery by FEM. Therefore, if air-gap domain was subdivided into triangular elements, computation results contain errors due to variation of element shape in air-gap because the nodal points corresponding to the rotor are displaced in analyzing domain for the time difference. In order to reduce this errors, the paper presents a application of a Macro Air-gap Element that interpolation function is obtained analytically and a means to join it with linear triangular elements in the rotating machine or in the linear machine. At the end of paper, setting up analytic domain model, it compares analytic solution with the computation results of Macro Air-gap Element appliction and that of linear triangular element subdivision only to each cases of nodal displacement. And it carries out that errors due to variation of element shape are reduced effectively by application of a Macro air-gap element.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.34-36
• /
• 2008

In this paper, we study on the necessity for limiting impedance of Superconducting Fault Current Limiter(SFCL) considering protective coordination. Several countermeasures have been proposed to protect the power system effectively from the larger fault current. Among them, the SFCL has been expected as one of the most effective solutions. However, the application of SFCL into power system can cause some problems, such as non-operation of instantaneous elements, of protective coordination because of limiting fault current. So we suggest that impedance of SFCL is must limited for operation of instantaneous elements. 'This method is essential to introduce application of SFCL into power distribution system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.244-249
• /
• 1997

Internal and external heat sources will cause to deform to machine elements in the contact joint of structure,which results in the change of contact pressure distribution different from initial assembly. Heat induced variations of contact pressure will change the static and dynamic properties such as contact stiffness,damping as well as contact heat conduction in the structure. In order to design and control the intelligent machine tool operating in variant conditions more sophisticatedly, the good prediction for the changes of prescribed propeties are strongly required especially in the contact elements adjacent to the rotational or linear bearing This paper presents some computational and experimental results in regard to static and dynamic characteristics of the press-fitted bush and shaft assembly which is a model of the bearing innerrace and shaft assembly. In the condition of heat generation on the outer surface of the bush,the effects of changes in the negative clearance and the heat flux on pressure distribution and dynamic properties are investigated. Results of this study show that the edge effect of the bush and the initial clearance have effects on the transient dynamic characteristics significantiy.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.303-311
• /
• 1997

The characteristics of spring machanism In the Cheju Island were analyzed by statistical techniques. Basic characteristics, areal and altitudinal variations, and correlations of spring data were investigated. In this study. however, the subjects of the study are the 451 springs, the whole basin of Cheju Island derided Into four groups. In this study, analyzed the spring phenomena on the basis of both the geologic elements and the topogaphic elements. Also, the spring zone In Cheju Island are classified Into three types that the mountain area, the muddle area, the coastal area in spring distribution by attitude. The quentity of spring and variability show subvariety on the average according to Meinzer's classilfication and the whole basin of spring shows various distributions from Third to Sixth. The results of this study can be utilized to evaluate the condition of groundwater development In Cheju Island.

• Knowledge Management Research
• /
• v.10 no.3
• /
• pp.81-98
• /
• 2009

The purpose of this study is to investigate the effect of Hallyu(Korean Wave) and marketing mix elements on brand equity based on the Korean cosmetic brand in China Market. It will provide the constructive suggestions to build Korea brand equity in overseas market through empirical research. At the beginning of this study, in order to analyze the effect of Hallyu and marketing mix elements on brand equity, we studied literature reviews on relationships between brand equity and marketing mix elements, culture, Hallyu and its influences on marketing. And then, we set up the research model, hypotheses and variables. The chosen variables to investigate are price premium, price deals, store image, distribution intensity, advertising, Hallyu, perceived quality, brand loyalty, brand awareness/associations, and brand equity. The results of the study reveal that Hallyu and advertising had a positive influence on perceived quality, brand loyalty and brand awareness/associations, but the other marketing elements had partial influence. All of perceived quality, brand loyalty and brand awareness/associations showed positive effects on brand equity. Additionally, theoretical and managerial implications of brand equity and Hallyu based on the results of this study are discussed. And limitations and future research issues are also presented.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1607-1612
• /
• 2007

It necessarily follows that wear particles are generated through a friction and wear in a mechanical moving system. The wear particles are relative to the failure and the life of machine elements directly. To analyze the wear particle, its shape characteristics were calculated quantitative values such as diameter, roundness and fractal parameters by digital image processing. In this study, the histograms of shape parameters of wear particles were used for the purpose of analyzing the distribution of wear particles in various conditions. We consider that the histogram of shape parameter can be effectively represented to study a wear mechanism.