• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.311-322
• /
• 2022

This study performed 4-point flexural tests of reinforced concrete to which was attached a distributed optical fiber sheet and carbon fiber reinforced polymer (CFRP) sheets in order to assess the effect of the CFRP sheets and the applicability of a BOTDR sensor simultaneously. To evaluate the reinforcing effect, various degrees of CFRP sheet attachment were manufactured, and to evaluate the sensing ability, strains obtained from a BOTDR sensor were compared with strains measured from electric resistance strain gauges that were attached to the concrete surface. From the results, the reinforcing effects were evidently different according to the attachment type of the CFRP sheets, and it was confirmed that the main influencing factor on the reinforcing effect was the type of attachment rather than the attachment area. The reinforced concrete structural behavior was visualized with strains measured from the BOTDR sensor as load increased, and it was identified that load was concentrated in the CFRP reinforced area. Strains from the BOTDR sensor were similar to those from the electric resistance strain gauge; thereby a BOTDR sensor can be effective in the analysis of structural behaviorsof massive infrastructure. Finally, the strain from a BOTDR sensor was high where CFRP sheet fall-off occurs, and it would therefore be efficient to track local damage locations of CFRP sheets by utilizing a BOTDR sensor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1169-1178
• /
• 2022

This study examines an effective operational plan of a maritime safety enforcement task that is distributed in the Ministry of Oceans and Fisheries and the Korea Coast Guard for maritime safety. Considering the sinking of the MV Sewol and Seohae vessels and the MV Hebei Spirit oil spill, normally marine safety accidents tend to not only damage human life, property, and marine environment but can also expand to disasters; therefore, precautionary measures are required. However, the Korean government takes superficial efforts in case of large-scale accidents. In case of the MV Sewol ferry, the government only focused on punishing the officials involved as a follow up and never mentioned any effective plan, such as "unification of maritime safety enforcement," in contrast to an advanced country. As a result, there are endless major and minor backward accidents. The probability of large-scale maritime accidents and backwardness accidents is increasing owing to vessels becoming large sized, high speed, and aged; sailors being unqualified; port traffic increase, development of marine leisure; and inefficiency dual marine safety systems. Therefore, based on the review of previous studies related to maritime safety, major advanced country's cases, and unified case of the vessel traffic service, this study suggests effective methods such as coastal vessel safety management, port state control and aid to navigation management, which are directly connected with maritime safety.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.382-392
• /
• 2023

Recent reports have indicated a rapid increase in the frequency of sediment disasters due to climate change and other changes in the geological environment. Given this alarming situation and the recent increase in the frequency of land creep in Korea, systematic and efficient recovery and management of land creep areas is essential. The purpose of this study is to identify disaster vulnerability by conducting a physical exploration of land creep in San 4-1, Jayeon-ri, Gaegun-myeon, Yangpyeong-gun, Gyeonggi-do, and examine stability by identifying the overall geological structure of the affected ground. In addition, drilling surveys are conducted to verify the reliability of the measured data. The results of the study reveal that low specific resistance abnormalities are distributed in the upper part of the soil layer and weathering zone and that this section is a 50-120 m exploration line. It is also confirmed to be a low-hardness ground area where tensile cracks are observed. Therefore, there is a need for research focused on developing measures to reduce economic and social damage within the domestic context by continuously monitoring indicators of land creep and identifying land creep risks.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.87-98
• /
• 2007

For the quick rehabilitation of a fire-damaged tunnel structure, it is the most important procedure to investigate the fire-induced damaged zone rapidly. This study aims to propose a new drilling resistance testing method by which mechanical properties of tunnel concrete lining altered by high temperature can be estimated easily and continuously. Especially, it alms to derive the relationships to estimate mechanical properties of mortar and concrete materials from drilling parameters. To obtain the optimum testing condition, a series of drilling resistance tests were carried out for mortar specimens. When the rotation per minute of drill bit, tile penetration rate and the bit diameter were 1,300 rpm, 1.40 mm/sec, and 10 mm respectively, the deviation of measured drilling resistance forces was minimal. Under the optimum testing condition, the relationships between drilling resistance and mechanical properties of mortar specimens were shown to be very favorable. The concept of replacing a mean value of resistance farces measured during drilling with the resistance energy was proposed to consider the effects of randomly distributed aggregates inside a concrete material on drilling resistance. When the concept was applied to concrete materials, a favorable relationship between actual compressive strength and drilling resistance energy was also successfully derived.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.4
• /
• pp.9-16
• /
• 2023

In this study, the status and characteristics of fine dust and its impact on neighboring areas were investigated to proactively respond to the government's environmental regulations expected in the future and to minimize the damage by the fine dust generated at construction waste intermediate treatment plants. In addition, since there are no such plants that can affect the surroundings with no houses or other waste treatment sites nearby, an independently located construction waste intermediate treatment plant was selected to compare the characteristics of fine dust with that from the construction waste intermediate treatment sites located in the downtown area. The conclusions of the study are as follows. (1) The measurement results of PM10 at 4 points in the plant showed that the location where the crushing facility was operating had an elevated level of fine dust at 80㎍/m³ on average and a maximum of 124㎍/m³, and the level rose to 110㎍/m³ at points where vehicles frequent. (2) The PM2.5 measurement results inside the plant showed that the average concentration of the reference point was 16㎍/m³ and the maximum value was 20㎍/m³, which was distributed within the management standard. (3) It was found that the average concentration of PM10 in the nearby area ranged from 28 to 38㎍/m³, which was similar to or lower than 36㎍/m³ of the reference point. Therefore, the concentration of the fine dust generated in the plant had a negligible effect on the increase in concentration of fine dust in nearby areas. (4) The heavy metal contents were measured from the filter paper collected from the plant. The PM10 was found to be about 14 to 26ng/m³, and PM 2.5 was 25 to 28ng/m³, which was the average of domestic atmospheric concentrations. (5) The SEM-EDX analysis results showed that the PM10 contained Si and O around 40% similarly for both. The SiO2, a component of silica occupied the most and C was present as CaCO3, which was assumed to be a limestone component. The remaining components included NaO, Al2O3, and CaO as trace oxides. (6) The SEM-EDX analysis results showed that the PM 2.5 contained 5 to 7% of Cl, which is a chlorine ion, and a small amount of K was detected at 2.51% in the sample from the shutdown plant.

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.385-388
• /
• 2023

Gypsy moth (Lymantria dispar), a polyphagous insect pest belonging to the family Lymantriidae, is widely distributed in Korea, Japan, Siberia, Europe, and North America. They pose a threat to various host plants including pear trees, apple trees, and blueberries. Traditionally considered a forest pest, the increasing incursion of gypsy moths into agricultural land near forested areas has intensified damage to crops lacking effective control methods. This study aimed to investigate the temperature-dependent development of gypsy moths to enhance outbreak prediction and advance technology development. The effects of temperature on development of each life stage were investigated under constant temperature conditions of 18, 21, 24, 27, 30, and 33℃ (14L:10D, RH 60±5%) utilizing egg masses collected in Jeollanam-do Jangheung-gun in 2021. The results revealed that higher temperatures accelerated the development rate of the gypsy moth larvae with optimal development occurring at 30℃. However, the survival rate was lowest at 33℃. At the favorable temperature of 30℃, the total development period was 43.8 days for females and 42.5 days for males. The developmental threshold temperature were 13.1℃ for females and 12.5℃ for males, with effective accumulated temperature of 641.1 DD and 657.8 DD, respectively.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2024

Organic light emitting diode(OLED) is distributed in layers with different refractive index, which leads to total internal reflection and low light extraction efficiency. As a result, light extraction technologies have been investigated that include structures such as MLA. However, technologies such as MLA are using petroleum-based polymers, which cause environmental problems during disposal. Therefore, this study investigates the use of eco-friendly polymers hydroxyethyl cellulose(HEC) and tannic acid(TA) to produce external light extraction films. HEC is biodegradable and has high transparency, making it suitable for eco-friend external light extraction films. The TA used as an additive is a polyphenolic molecule, which is expected to form strong hydrogen bonds with HEC. In addition, TA can protect OLED from damage by UV light through its phenolic groups. HECTA MLA films were produced by dissolving HEC and TA in water without using additional solvents and then imprinting them on MLA mould. When the HECTA MLA film was attached to the outside of the OLED and analysed, it showed a high Haze of more than 80%, and the external quantum efficiency and current efficiency of the OLED were improved by 38% and 39%, respectively, compared to the reference.

• Clean Technology
• /
• v.30 no.3
• /
• pp.175-187
• /
• 2024

Seaweeds are widely distributed along national coastlines around the world, and the biomass derived from them is an important marine biological organism. Seaweed is a crucial component of a healthy marine ecosystem. However, changes in marine environments have led to the occurrence of urchin barrens, and the damage caused by this phenomenon is steadily increasing. As a result, investigations into the distribution and spread of urchin barrens in the coastal areas of South Korea are being conducted regularly so efficient detection technologies are essential. One of the technologies that can swiftly and accurately analyze extensive areas is detection technology based on hyperspectral image information systems. This study aims to present the latest hyperspectral imaging technology for investigating the current status of urchin barrens and the methods for classifying this technology, including principles, preprocessing techniques, and correction methods. This study also proposes a classification technique for urchin barrens along the coast of Jeju Island that uses hyperspectral images and categorizes the urchin barrens into initial, intermediate, and advanced stages. The results showed that approximately 17.5% of the experimental areas were in the advanced stage. Based on this, various management and restoration methods tailored to different categories of urchin barren can be proposed.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.704-717
• /
• 2013

This study aims to provide basic data for management and prevention of infection damage by Oak wilt disease through mapping method of status with infected level in damaged area of Bukhansan National Park. Survey was carried out in the distributed area of oak trees with mapping unit of polygon of actual vegetation and mapped of infection ratio and infection index applying weight according to infected level. Infection ratio of oak trees in Bukhansan National Park was 58.5%, and lightly damaged ratio was 29.6%, half of the damaged ratio was 16.1%, seriously damaged ratio was 8.8% and withered ratio was 4.1%. It was serious to be infected from Beomgol ridge in Wondobong district to Hyeongjaebong in Jeongrung district. Although the infected ratio of the western part of Songchu district, Sanseong district and Gugi district centering main ridge of Bukhansan National Park was low, it of ridge and main valley was high. Infection index of hardly damaged area was 39.1% of whole area, and slightly damaged area was 41.0%, half of the damaged area was 16.1%, seriously damaged area was 3.3% and alarmed withering area was 0.4%. Infection index was high around Musugol valley in Dobong district and Jaunbong, and it of Bohyunbong of Jeongrung district and the part of Hyojari valley of Sanseong district was serious. Predicted numbers of the trees affected Oak wilt disease compared to the distributed area of oak trees was 1,585,937 trees among 2,709,147 trees of Quercus spp. 352,931 trees among the 306,161 trees of oak were infected in Woi district, the most seriously infected area and 53,141 trees among the 145,747 trees of oak was infected in Gugi district, the most slightly infected area.

• Korean Journal of Ecology and Environment
• /
• v.35 no.2 s.98
• /
• pp.63-70
• /
• 2002

Long-term changes of the fish fauna and its community structure from the Jungrang Creek of the Han River system in Seoul were investigeted from 1990 to 2000. Total species occurred during the survey period were 14 species in 6 families, and total individual number was 108,366. Fishes at the Jungrang Creek had not been distributed in the 1980s and 1990 because of heavy water pollution as well as environmental damage in the riparian areas. However, Cyprinus carpio and Carassius auratus in cyprinidae were rehabitated since the early 1990s when the water quality was improved because of foundation of sewage division pipe. Species nombers gradually increased to 6 species in 1996, 9 species in 1998, and 11 species in 2000. Individual numbers rapidly increased to 164 individuals in 1996, 146 individuals in 1998, and 108,094 individuals in 2000. A large number of Cyprinus carpio and Carassius auratus, which are abundantly distributed in the main course of the Han River, were found when they migrate to the upper reaches of the Jungrang Creek for spawning. Mass fish floatings were occurred on the 21st of April and the 11th of June in 2000 due to DO depletion at the lower site (Site 4) of discharging point of Jungrang sewage treatment plant and stagnant spot(Site 3) of dammed pool. Major dominant species were Cyprinus carpio and Carassius auratus (Cyprinidae). Others dominant species were Pseudorasbora lab대 (Cyprinidae) and Silurus asotus (Siluridae). Dominance indices were relatively high (0.79 to 1.00). Species diversity andrichness indices were relatively low (0 to 1.66and 0 to 1.41, respectively). Species diversity and richness indices were slightly higher at the middle reaches (Site 2 and Site 3) than the upper reaches and the mouth of the Jungrang Creek. However, the fish fauna of the Jungrang Creek was very poor and its community structure was very simple.