• Earthquakes and Structures
• /
• v.24 no.6
• /
• pp.393-404
• /
• 2023

This paper presents the application of hybrid-simulation-based adapter elements for the non-linear two-scale analysis of reinforced concrete frames with masonry infills under seismic-like demands. The approach provides communication and distribution of the computations carried out by two or more remote or locally distributed numerical models connected through the OpenFresco Framework. The modeling consists of a global analysis formed by macro-elements to represent frames and walls, and to reduce global degrees of freedom, portions of the structure that require advanced analysis are substituted by experimental elements and dimensional couplings acting as interfaces with their respective sub-assemblies. The local sub-assemblies are modeled by solid finite elements where the non-linear behavior of concrete matrix and masonry infill adopt a continuum damage representation and the reinforcement steel a discrete one, the conditions at interfaces between concrete and masonry are considered through a contact model. The methodology is illustrated through the analysis of a frame-wall system subjected to lateral loads comparing the results of using macro-elements, finite element model and experimental observations. Finally, to further assess and validate the methodology proposed, the paper presents the pushover analysis of two more complex structures applying both modeling scales to obtain their corresponding capacity curves.

• Advances in nano research
• /
• v.16 no.1
• /
• pp.91-109
• /
• 2024

Carbon nanotubes are drawing wide attention of research communities and several industries due to their versatile capabilities covering mechanical and other multi-physical properties. However, owing to extreme operating conditions of the synthesis process of these nanostructures, they are often imposed with certain inevitable structural deformities such as single vacancy and nanopore defects. These random irregularities limit the intended functionalities of carbon nanotubes severely. In this article, we investigate the mechanical behaviour of double-wall carbon nanotubes (DWCNT) under the influence of arbitrarily distributed single vacancy and nanopore defects in the outer wall, inner wall, and both the walls. Large-scale molecular simulations reveal that the nanopore defects have more detrimental effects on the mechanical behaviour of DWCNTs, while the defects in the inner wall of DWCNTs make the nanostructures more vulnerable to withstand high longitudinal deformation. From a different perspective, to exploit the mechanics of damage for achieving defect-induced shape modulation and region-wise deformation control, we have further explored the localized longitudinal and transverse spatial effects of DWCNT by designing the defects for their regional distribution. The comprehensive numerical results of the present study would lead to the characterization of the critical mechanical properties of DWCNTs under the presence of inevitable intrinsic defects along with the aspect of defect-induced spatial modulation of shapes for prospective applications in a range of nanoelectromechanical systems and devices.

• Structural Monitoring and Maintenance
• /
• v.10 no.4
• /
• pp.299-314
• /
• 2023

Long-gauge carbon fiber line (CFL) sensors have received considerable attention in the past decade. However, there is still a need for an in-depth investigation of their measuring accuracy. This study investigates the accuracy of carbon fiber line sensors to monitor and differentiate the flexural behavior of two beams, one reinforced with steel bars alone and the other reinforced with steel and basalt fiber-reinforced polymer bars. A distributed set of long-gauge carbon fiber line, Fiber Bragg Grating (FBG), and traditional strain gauge sensors was mounted on the tensile concrete surface of the studied beams to compare the results and assess the accuracies of the proposed sensors. The test beams were loaded monotonically under four-point bending loading until failure. Results indicated the importance of using long-gauge sensors in providing useful, accurate, and reliable information regarding global structural behavior, while point sensors are affected by local damage and strain concentrations. Furthermore, long-gauge carbon fiber line sensors demonstrated good agreement with the corresponding Fiber Bragg Grating sensors with acceptable accuracy, thereby exhibiting potential for application in monitoring the health of large-scale structures.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.37-42
• /
• 2021

Munseom (Island) is known as the largest native Elaeocarpus sylvestris var. ellipticus in Korea. Recently, disease damage from the E. sylvestris var. ellipticus community has been reported in Munseom. This study was conducted to understand the damage situation and growth characteristics of the E. sylvestris var. ellipticus population in Munseom. The purpose of this study was to evaluate the spontaneous regeneration potential of the community by grasping the characteristics of the population of surviving E. sylvestris var. ellipticus individuals, and to discuss ways to restore native habitats. A total population survey was conducted to determine the distribution status of E. sylvestris var. ellipticus individuals. The field survey carefully recorded the height of tree, DBH, DRH, and growing status, along with GPS location information of the individual. The growth status of E. sylvestris var. ellipticus individuals distributed in Munseom and the characteristics of tree height, DBH, DRH of each individual were analyzed. The total number of E. sylvestris var. ellipticus populations identified in Munseom was 293. The dense E. sylvestris var. ellipticus community reported in 2005 has been identified as being greatly damaged or damaged. In particular, the damage was more serious in mature trees with a height of 6m or more forming the canopy layer in the forest, and it was confirmed that 80.6% of the mature trees died. In the growth characteristics of the old-growth tree, which is an indicator of the health of the forest based on DRH, 75.4% died or the growth condition was found to be poor. In order to restore the native habitat of E. sylvestris var. ellipticus in Munseom, conservation efforts such as pest control, preservation of mature trees, control of the territory of young trees, and reintroduction after ex-situ transplantation etc. are considered necessary.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.456-464
• /
• 2016

Korea established an inventory of 1,916 sites of inland wetlands during a nationwide investigation from 2000 to 2010. If inland wetlands is included in or near various protected areas designated by the government, it can be selected as a wetland to be managed with priority. This study evaluated the aspect of management of inland wetlands by analyzing the correlation between locations of national protected areas and inland wetlands. As a result, it was shown that a considerable percentage of current inland wetland was located in areas that were designated and managed as protected areas by the government, as they had a high value of natural environment protection (527 sites, 31.61 %). When the range was widened to a radius of 1 km for protected areas, 959 sites were included and 57.53 % of sites were located in or nearby the protected areas. Among them, 46.79 % of sites were distributed up to or within a 1 km radius of waterside areas and rivers; it accounted for 81.33 % of wetlands located in protected areas. Therefore, it was found that locations of current inland wetlands were mostly in contact with rivers. The results of overlay analysis were classified into high, medium and low; the correlation of location with inland wetlands was analyzed through the analysis of separation distance of various protected areas. The number of wetlands located in areas of a 'high' value of protection was 998 (59.87 %); 289 sites (17.34 %) were distributed in areas of a 'low' value of protection. This implies that these wetlands are located in artificial areas and are more exposed to environmental pressures. Thus, these wetlands could be determined as inland wetlands, which we considered for the establishment of measures to prevent damage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1551-1559
• /
• 2015

Recently, the performance of smart devices is almost similar to that of the existing PCs, thus the users of smart devices can perform similar works such as messengers, SNSs(Social Network Services), smart banking, etc. originally performed in PC environment using smart devices. Although the development of smart devices has led to positive impacts, it has caused negative changes such as an increase in security threat aimed at mobile environment. Specifically, the threats of mobile devices, such as leaking private information, generating unfair billing and performing DDoS(Distributed Denial of Service) attacks has continuously increased. Over 80% of the mobile devices use android platform, thus, the number of damage caused by mobile malware in android platform is also increasing. In this paper, we propose android based malware detection mechanism using time-series analysis, which is one of statistical-based detection methods.We use auto-regressive moving-average model which is extracting accurate predictive values based on existing data among time-series model. We also use fast and exact malware detection method by extracting possible malware data through Z-Score. We validate the proposed methods through the experiment results.

• Korean Security Journal
• /
• no.20
• /
• pp.45-69
• /
• 2009

This study is to present effective and rational strategies by comparing and analyzing plans of some nations such as the United States, Britain, Germany and Japan against terrorism. Nations mentioned above have made alliance to prevent the possible terrorism after 9.11 attack and performed various tasks efficiently. The result of this study is summarized as follows. First, it is required that there should be an integrated system which works properly. Each nation has not distinguished natural disaster from man-made one based on the damage and the abilities of authorities to deal with. On the other hand, South Korea tells two disasters according to causes and runs distributed systems in which each government division performs its duties to manage each disaster. Accordingly, in economic terms, it is much more effective to provide integrated counter terrorism, not distributed one. Second, information sharing must be stimulated. To take actions quickly when an accident occurs, the government needs to have united and integrative systems, which make it prepare for various types of terrorism well. In addition, it is necessary for a government-related organization to tie up with other channels for collecting, analyzing and sharing information. For this, integrative systems for terrorism should be taken into consideration.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.1-7
• /
• 2013

The wildland fire intensity and scale are getting bigger owing to climate change in the world. In the case of domestic, the forest is distributed over approximately 63.7 % of country and the main facilities like a industrial facility or gas facility abuts onto it. Therefore there is potential that the wildland fire is developed to a large-scale disaster. In this study, the effect distances of the radiant heat flux from the crown fire are analysed according to the change of wind velocity. The safety criteria concerning the radiant heat flux to influence on the surrounding were researched to analyse the effect distances. The criteria of radiant heat flux were chosen $5kW/m^2$, $12.5kW/m^2$, $37.5kW/m^2$. WFDS, which is an extension of NIST's Fire Dynamics Simulator, was used to consequence analysis of the forest fire. In order to apply the analysis conditions, it is researched the forest conditions that is generally distributed in domestic region. As the result, the maximum effect distances by radiant heat were showed at the horizontal and vertical direction. When the wind velocity varied from 0 to 10 m/s, the maximum effect distance increased as the wind velocity increases. Interesting point is that the maximum effect distance were shown at the wind velocity of 8 m/s. The maximum effect distance was decreased according as the fuel moisture of trees increase. This study can contribute to analyse quantitative risk about the damage effect of the surrounding facilities caused by wildland fire.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.767-776
• /
• 2014

Changes in climate have largely increased concentrated heavy rainfall, which in turn is causing enormous damages to humans and properties. Floods are one of the most deadly and damaging natural disasters known to mankind. The flood forecasting and warning system concentrates on reducing injuries, deaths, and property damage caused by floods. Therefore, the exact relationship and the spatial variability analysis of hydrometeorological elements and characteristic factors is critical elements to reduce the uncertainty in rainfall-runoff model. In this study, grid resolution depending on the topographic factor in rainfall-runoff models presents how to respond. semi-distribution of rainfall-runoff model using the model GRM simulated and calibrated rainfall-runoff in the Gamcheon and Naeseongcheon watershed. To run the GRM model, input grid data used rainfall (two event), DEM, landuse and soil. This study selected cell size of 500 m(basic), 1 km, 2 km, 5 km, 10 km and 12 km. According to the resolution of each grid, in order to compare simulation results, the runoff hydrograph has been made and the runoff has also been simulated. As a result, runoff volume and peak discharge which simulated cell size of DEM 500 m~12 km were continuously reduced. that results showed decrease tendency. However, input grid data except for DEM have not contributed increase or decrease runoff tendency. These results showed that the more increased cell size of DEM make the more decreased slope value because of the increased horizontal distance.

• Korean journal of applied entomology
• /
• v.2
• /
• pp.47-54
• /
• 1963

The chestnut gall wasp, Dryocosmus kuriphilus $Y^{ASUMATSU}$, has been recently distributed and chestnut trees have teen seriously damaged by this insects in Korea. However, this insect pest has not been investigated in Korea. This paper gives an account of field and Laboratory observations on the seasonal occurrence and the life history of the chestnut gall wasp, and the damage of the chestnut trees by. its insects. This study was carried out at Chungchungpukdo, Kangwon-do and Kyungi-do in Korea, from 1961 to 1963, inclusive. 1. The Chestnut gall wasp (Dryocosmus kuriphilus $Y^{ASUMATSU}$) has one generathion per year and females are only known. 2. The adult wasps were observed from late June to late July with peak of wasp emergence about early and middle July. Most of new adult wasps were coming out from, the galls in the morning rather than the afternoon. 3. Each wasp produced auerage 198.5 eggs and about 4.89 eggs was observed in each bud of the chestnut tree. 4, The egg period of wasps was about 30 days and they were hatching from July to August. 5. The larval period of wasps were from middle of August to middle of next June and pupation took places about early June to middle of July. 6. The adult wasps were ovipositing into the buds and from early May next year, galls were growing. They caused stunting of growth and no fruiting or dying of the chestnut tries. 7. The first observation of the wasp was made at Chaechun of Chungchung-pukdo in 1958. Up to 1963 this insects are distributed in Kangwon-do, Kyunggi-do, north part of Chungchung-pukdo and north part of Kyungsangpukdo