• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.648-657
• /
• 2004

A method of extracting central objects in color images without any prior-knowledge is proposed in this paper, which uses basically information of significant color distribution. A central object in an image is defined as a set of regions that lie around center of the image and have significant color distribution against the other surround (or background) regions. Significant colors in an image are first defined as the colors that are distributed more densely around center of the image than near borders. Then core object regions (CORs) are selected as the regions a lot of pixels of which have the significant colors. Finally, the adjacent regions to the CORs are iteratively merged if they are similar to the CORs but not to the background regions in color distribution. The merging result is accepted as the central object that may include differently color-characterized regions and/or two or more objects of interest. Usefulness of the significant colors in extracting the central object was verified through experiments on several kinds of test images. We expect that central objects shall be used usefully in image retrieval applications.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1306-1313
• /
• 1999

본 연구는 인터넷 기반 공유가상공간에서 시스템의 확장성을 유지하기 위하여 이동객체를 대상으로 하는 이벤트 필터링 기법을 제안하고자 한다. 제안된 다중격자 모델 기법은 이동객체의 경로 상에서 대표적인 이벤트를 샘플링하는 방식을 사용한다. 이 방식은 메시지 트래픽의 양을 동적으로 조절하기 위하여 이동객체 간의 관심정도 정보를 수치적으로 변환하여 이벤트 갱신빈도에 반영한다. 대량의 이동객체를 생성하여 제안된 기법을 적용한 성능평가 실험에서 기존의 방식에 비하여 평균 메시지 전송량이 50%이상 감소하는 것으로 확인할 수 있었다. 다중격자 모델은 참여자의 수와 메시지 트래픽 상황에 따라 가상환경의 공유 QoS를 동적으로 조절할 수 있으며, 인터넷 상에서 다수 사용자를 위한 3차원 가상사회 구축 및 온라인 네트워크 게임 개발 등에 활용될 수 있을 것이다.Abstract This paper proposes an event filtering technique that can dynamically control a large amount of event messages produced by moving objects like avatars or autonomous objects in a distributed virtual environment. The proposed multi-level grid model technique uses the method that extracts the representative events from the paths of moving objects. For dynamic control of message traffics, this technique digitizes the DOIs of the avatars and reflects the interest information controlling the frequency of message transmission. For the performance evaluation, a large number of moving objects were created and the model was applied to these avatar groups. In the experiments, more than 50% of messages have been reduced in comparison with the existing AOI-based filtering techniques. The proposed technique can dynamically control the QoS in proportion to the number of users and the amount of messages where a large number of users share a virtual space. This model can be applied to the development of 3D collaborative virtual societies and multi-user online games in the Internet.

• Journal of KIISE:Software and Applications
• /
• v.29 no.7
• /
• pp.487-497
• /
• 2002

As component-based reuse technology is being introduced, software components are more likely distributed on Internet. In order to promote Internet based on-line distribution, distribution model of components should be defined and a distribution system should also be constructed. Furthermore, to run the component distribution system effectively, a logical and practical schema for classifying components should be defined and standardized. In this paper, we propose a classification schema using BNF and representation standards of components using six different views. To verity the effectiveness of proposed classification and compare to other classification methods, we assess proposed classification by measuring hit ratio and correctness. By using the proposed methods that support six views on components, the search for right components and registering new components can be done more effectively.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.11
• /
• pp.403-408
• /
• 2014

In the Internet of Things(IoT) era, many of the things or objects that enclose our environments are able to associate with those things on the Internet. To construct IoT systems, it needs to consider a component for acquiring and aggregating of sensory data via things with sensors and instruments, which is connected by diverse networks, in IoT environment. An IoT system is intrinsically distributed in a variety of ways. In addition, to manage an IoT system efficiently, interoperability is needed to meet requirements while the IoT system is designed to deliver data among its applications. In this paper, a reference architecture based on asynchronous messaging is defined and used for designing an IoT system. To apply the architecture, we discuss how to manage data streams with real-time characteristics and make a prototype based on pipe-and-filter to produce and consume them by a pub/sub messaging system NaradaBrokering.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.744-751
• /
• 2008

Ubiquitous computing is a new paradigm of telecommunication technology and is embedded with advanced computing technology to process a large amount of data in a normal environment. Generally, ail equipment is embedded with sensors and operating devices to interaction with communication functions. That is why ubiquitous computing must be able to access any devices anywhere at anytime in order to perform appropriate functions. Unfortunately, however, it is difficult to make an optimized design for applications which can effectively interaction with various functions in distributed environment like ubiquitous computing. Therefore, this paper is aimed at deploying interface with server nodules and virtual prototyping by utilizing LabVIEW and embedded application software with additional network function. In addition, given information about sensors collected from context-awareness and location-awareness, it will suggest the ideal ubiquitous application based on context-awareness and apply the advanced application to device control and monitoring through context awareness of lab.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3327-3334
• /
• 2021

Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.22-29
• /
• 2019

Due to the development of ICT technology, convergence reality contents are utilized as technology for providing services in various industrial fields by visualizing various information such as sensor information and shared information in a service platform showing only simple three-dimensional contents. Research is underway to reduce the weight of applications by transmitting the resources of the object to be enhanced to the network as the information and the contents to be provided increase. In order to provide resources through the network, servers for processing various information such as pattern information, content information, and sensor information must be constructed in a cloud environment. However, in order to authenticate data transmitted and received in real-time in a cloud environment, there is a problem in that the processing is delayed and a delay phenomenon occurs in the rendering process and QoS is lowered. In this paper, we propose a system to distribute cloud server which provides augmented contents of convergent reality service that provides various contents such as sensor information and three - dimensional model, and shorten the processing time of reliable data through distributed relay between servers Respectively.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.846-857
• /
• 2019

Voltage step-down converters are very popular in distributed power systems, voltage regular modules, electric vehicles, etc. However, a high step-down voltage ratio is required in many applications to prevent the traditional buck converter from operating at extreme duty cycles. In this paper, a series capacitor interleaved buck converter with a soft switching technique is proposed. The DC voltage ratio of the proposed converter is half that of the traditional buck converter and the voltage stress across the one main switch and the diodes is reduced. Moreover, by paralleling the series connected auxiliary switch and the auxiliary inductor with the main inductor, zero voltage transition (ZVT) of the main switches can be obtained without increasing the voltage or current stress of the main power switches. In addition, zero current turned-on and zero current switching (ZCS) of the auxiliary switches can be achieved. Furthermore, owing to the presence of the auxiliary inductor, the turned-off rate of the output diodes can be limited and the reverse-recovery switching losses of the diodes can be reduced. Thus, the efficiency of the proposed converter can be improved. The DC voltage gain ratio, soft switching conditions and a design guideline for the critical parameters are given in this paper. A loss analysis of the proposed converter is shown to demonstrate its advantages over traditional converter topologies. Finally, experimental results obtained from a 100V/10V prototype are presented to verify the analysis of the proposed converter.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.639-643
• /
• 2021

In this study, fluorinated ethylene propylene (FEP) nanoparticle as an adhesive for fabricating a three-dimensional multilayered microfluidic device was studied. The formation of evenly distributed FEP nanoparticles layer with 3 ㎛ in thickness on substrates was achieved by simple spin coating of FEP dispersion solution at 1500 rpm for 30 s. It is confirmed that FEP nanoparticles transformed into a hydrophobic thin film after thermal treatment at 300 ℃ for 1 hour, and fabricated polyimide film-based microfluidic device using FEP nanoparticle was endured pressure up to 2250 psi. Finally, a three-dimensional multilayered microfluidic device composed of 16 microreactors, which are difficult to fabricate with conventional photolithography, was successfully realized by simple one-step alignment of FEP coated nine polyimide films. The developed three-dimensional multilayered microfluidic device has the potential to be a powerful tool such as high-throughput screening, mass production, parallelization, and large-scale microfluidic integration for various applications in chemistry and biology.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.293-303
• /
• 2021

Separation membranes used in water filtration, protein purification or biomedical filtration device frequently undergo membrane fouling for several reasons. The formation of biofilm on the membrane surface by bacteria causes a severe problem for durability of the membrane. For the protein separation, the membrane pores get blocked due to surface hydrophobicity of the membrane. There are several approaches controlling the membrane fouling and one of them is the incorporation of silver nanoparticles. Antibacterial properties of silver nanoparticles are well known and thus widely used in several applications. In this review, we have focused on the membranes where silver nanoparticles or its derivatives are either incorporated in the active layer of thin film composite membranes or uniformly distributed throughout the whole membranes.