• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.58.1-58.1
• /
• 2011

WC-Co and other similar cemented carbides have been widely used as hard materials in industrial cutting tools and as mould metals; and a number of techniques have been applied to improve its microstructural characteristics, hardness and ear resistance. Cobalt is used primarily to facilitate liquid phase sintering and acts as a matrix, i.e. a cementing phase between WC grains. A uniform distribution of metal phase in a ceramic is beneficial for improved mechanical properties of the composite. WC-Co, starting from initial powders, is vastly used for a variety of machining, cutting, drilling, and other applications because of its unique combination of high strength, high hardness, high toughness, and moderate modulus of elasticity, especially with fine grained WC and finely distributed cobalt. In this study, that started with two different compositions of initial powders, WC-7.5wt%Co and WC-12wt%Co with initial powder size being 1~3 ${\mu}m$, magnetic pulsed compaction followed by subsequent vacuum sintering were carried out to produce consolidated preforms. Magnetic Pulsed Compaction (MPC), a very short duration (~600 ${\mu}s$), high pressure (~4 Gpa), high-density preform molding method was used with varied pressure between 0.5 and 3.0 Gpa, in order to reach an initial high density that would help improve the sintering behavior. For both compositions and varied MPC pressure, before and after sintering, changes in microstructural behavior and mechanical properties were analyzed. With proper combination of MPC pressure and sintering, samples were obtained with better mechanical properties, densification and microstructural behavior, and considerably improved than other conventional processes.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.307-312
• /
• 2007

Wireless Sensor Network(WSN) is considered as a core technology necessary for Ubiquitous computing, with its numerous possible applications in many practical areas, is being researched and studied actively by many around the world. WSN utilizes wireless sensors spatially placed to gather information regarding temperature, light condition, motion and change in speed of the objects within their surrounding environment. This paper implements an environmental information monitoring and indexing system based on spatial indexing technique by constructing a WSN system. This Multi-Query Indexing Technique coupled with wireless sensors provides an output based on the pre-defined built-in data index and new input from the sensors. If environment data is occured, system have to perform a proper action after collecting and analyzing this data. This is the purpose of implementing environment data monitoring system. We constructed environmental application using TinyOS and built tested with MICAz sensor bords. We designed and implemented a monitoring system which detects and multi-indexing process environmental data from distributed sensors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1433-1443
• /
• 1993

DCT(Discrete Cosine Transform) / IDCT(Inverse DCT) is widely used in various image compression and decompression systems as well as in DSP(Digital Signal Processing) applications. Since DCT/ IDCT is one of the most complicated part of the compression system, the performance of the system can be greatly enchanced by improving the speed of DCT/IDCT operation. In this thesis, we designed a DCT/IDCT core processor using module generator technique. By utilizing the partial sum and DA(Distributed Arithmetic) techniques, the DCT/ IDCT core processor is designed within small area. It is also designed to perform the IDCT(Inverse DCT) operation with little additional circuitry. The pipeline structure of the core processor enables the high performance, and the high accuracy of the DCT/IDCT operation is obtained by having fewer rounding stages. The proposed design is independent of design rules, and the number of the input bits and the accuracy of the internal calculation coa be easily adjusted due to the module generator technique. The accuracy of the processor satisfies the specifications in CCITT recommendation H, 261.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.329-336
• /
• 2002

With the fast development of Internet environment, e-Commerce is rapidly increasing. n the expanding e-Commerce environment, the need for a new e-Commerce systems what will deliver products to the customer rapidly and increase sales is growing bigger. Recently, these requirements brought many researches on recommender systems. However, until now, those recommender systems have a limit because it takes too much time for recommender systems to give customers the recommendations in real time, if the number of purchase data of customers is large. So this paper concerns on the recommender systems using collaborative filtering as one of the solutions to increase the competitive power. We proposed and experimented the more improved recommender systems which could decrease the data size to shorten the recommending time by using the representative category of the product which customers want to buy. Also, we design and implement a recommender system using Enterprise JavaBeans.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.222-231
• /
• 2017

In this paper, a new architecture for a cost-effective power conditioning systems (PCS) using a single-sourced asymmetric cascaded H-bridge multilevel inverter (MLI) for photovoltaic (PV) applications is proposed. The asymmetric MLI topology has a reduced number of parts compared to the symmetrical type for the same number of voltage level. However, the modulation index threshold related to the drop in the number of levels of the inverter output is higher than that of the symmetrical MLI. This problem results in a modulation index limitation which is relatively higher than that of the symmetrical MLI. Hence, an extra voltage pre-regulator becomes a necessary component in the PCS under a wide operating bias variation. In addition to pre-stage voltage regulation for the constant MLI dc-links, another auxiliary pre-regulator should provide isolation and voltage balance among the multiple H-bridge cells in the asymmetrical MLI as well as the symmetrical ones. The proposed PCS uses a single-ended DC-DC converter topology with a coupled inductor and charge-pump circuit to satisfy all of the aforementioned requirements. Since the proposed integrated-type voltage pre-regulator circuit uses only a single MOSFET switch and a single magnetic component, the size and cost of the PCS is an optimal trade-off. In addition, the voltage balance between the separate H-bridge cells is automatically maintained by the number of turns in the coupled inductor transformer regardless of the duty cycle, which eliminates the need for an extra voltage regulator for the auxiliary H-bridge in MLIs. The voltage balance is also maintained under the discontinuous conduction mode (DCM). Thus, the PCS is also operational during light load conditions. The proposed architecture can apply the module-integrated converter (MIC) concept to perform distributed MPPT. The proposed architecture is analyzed and verified for a 7-level asymmetric MLI, using simulation results and a hardware implementation.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2505-2513
• /
• 2000

This paper describes the design and implementation of a CORBA/SNMP gateway. The gateway is used to integrate traditional network management systems using CORBA. The integrated network management system uses World Wide Web (WWW) and CORBA. WWW provides a platform-independent and easy-to-use interface to distributed applications and CORBA is used to integrate different network management models seamlessly. To support the traditional managed objects without modification, we use a translation gateway between two different management models. The integrated network management server consists of a WWW server with enhancement for network management and translation gateways for converting management operations between different management models. This paper describes the design and implementation of a CORBA/SNMP gateway. The CORBA/SNMP gateway provides a syntactic and dynamic translation between CORBA and SNMP management models. The gateway provides a CORBA view to SNMP MIBs and allows the CORBA managers to access SNMP agents via CORBA operations. The CORBA/SNMP gateway also delivers the traps occurred in the SNMP agents to the CORBA managers that want to receive the trap information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.976-983
• /
• 2013

The targets for the traditional IT management solutions has been mostly systems (server) and networks. Such that management system for system and network, SMS and NMS respectively, used be the IT management solutions. Now the speed of hardware improvement is faster than ever, the performance improvement scope is shifting from hardware towards software. Therefore, it is not arguable that the business success depends on the efficient and optimized application performance management. There are many different approaches are developed in the application performance management, but in this study, API-based logging system that most efficiently visualizes the correlation of call and response between Components and enables active performance management for monitoring real-time applications operation status and resolving the problems and failures quickly.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.59-67
• /
• 2005

Building information is primary source in many applications such as mapping, telecommunication, car navigation and virtual city modeling. While aerial CCD images which are captured by passive sensor(digital camera) provide horizontal positioning in high accuracy, it is far difficult to process them in automatic fashion due to their inherent properties such as perspective projection and occlusion. On the other hand, LIDAR system offers 3D information about each surface rapidly and accurately in the form of irregularly distributed point clouds. Contrary to the optical images, it is much difficult to obtain semantic information such as building boundary and object segmentation. Photogrammetry and LIDAR have their own major advantages and drawbacks for reconstructing earth surfaces. The purpose of this investigation is to automatically obtain spatial information of 3D buildings by fusing LIDAR data with aerial CCD image. The experimental results show that most of the complex buildings are efficiently extracted by the proposed method and signalize that fusing LIDAR data and aerial CCD image improves feasibility of the automatic detection and extraction of buildings in automatic fashion.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.562-565
• /
• 2013

The high purity Al foil, which has an enlarged surface area by electrochemical etching process, has been used as an anode for an aluminum electrolytic capacitor. Etch pits are randomly distributed on the surface because of the existence of surface irregularities such as impurity and random nucleation of pits. Even though a large surface area was formed on the tunnel-etched Al, its applications to various fields were limited due to non-uniform tunnel morphologies. In this work, the selective electrochemical etching of aluminum was carried out by using a patterned mask fabricated by photolithographic method. The formation of etch pits with uniform distribution has been demonstrated by the optimization of experimental conditions such as current density and etching solution temperature.

• Journal of Information Technology Application
• /
• v.3 no.4
• /
• pp.43-62
• /
• 2001

Time variable has been one of the most important ones to explain consumer behavior. Time-pressure could give some impact on decision making process, consuming process of goods, the frequency of purchasing activities and their behavior about after service. It is widely accepted that on-line shopping through Internet can overcome the time and space limitations consumers usually meet for their shopping activities. If that concept is true, on-line shopping through Internet might be an attractive way for those who feel high time pressure for their shopping activities. To test the impact of time pressure on consumer behavior at Electronic Commerce, this paper set three hypothesis. Questionnaire were distributed to married women around Taejon. Sample size were 73, 39 of which from women who have job, 34 who don't have job. The result of this paper might shed some light on the policy making to develop Internet shopping malls.