• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.7-14
• /
• 2013

The legitimacy of dominating factor in the high accuracy prediction of welding distortion was investigated for butt welding and fillet welding. When out-of-plane distortion was measured by the experiment objecting to butt welding, if tack welding was easily performed, the position of a neutral axis was variously changed by the irregularity. Then, there have been a case that out-of-plane distortion was generated in the unexpected direction. This case should be especially noted. New model for the experiment was proposed so as to solve this problem. As it was elucidated by the case of fillet welding, it was verified that the analysis should be carried out with satisfying the yield condition (especially at high temperature above 700 degree Celsius) and with closely simulating the penetration shape (heat input in weld metal) in order to solve the proposition that is the high accuracy prediction of welding distortion. It was confirmed that residual stress is highly predicted because welding distortion is highly predicted, too.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.807-817
• /
• 2016

A novel fast algorithm is suggested for a coding unit (CU) mode decision using pseudo rate-distortion based on a separated encoding structure in High Efficiency Video Coding (HEVC). A conventional HEVC encoder requires a large computational time for a CU mode prediction because prediction and transformation procedures are applied to obtain a rate-distortion cost. Hence, for the practical application of HEVC encoding, it is necessary to significantly reduce the computational time of CU mode prediction. As described in this paper, under the proposed separated encoder structure, it is possible to decide the CU prediction mode without a full processing of the prediction and transformation to obtain a rate-distortion cost based on a suitable condition. Furthermore, to construct a suitable condition to improve the encoding speed, we employ a pseudo rate-distortion estimation based on a Hadamard transformation and a simple quantization. The experimental results show that the proposed method achieves a 38.68% reduction in the total encoding time with a similar coding performance to that of the HEVC reference model.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.22-25
• /
• 2007

Angular distortion in welding process is decided by the various variables. We can make the prediction of welding distortion in similar reality by the analysis of data through many specimen tests. However it is difficult that prediction of welding distortion applies to the ship building. We can establish that angular distortion varies directly as the specimen size. And, it makes clear distortion's difference between constraint and unconstraint, according to the change of a plate thickness.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.87-91
• /
• 2009

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by welding distortion tends to preclude the introduction of automation and mechanization and requires additional man-hours for adjustment work during the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method that can explicitly account for the influence of various factors on the welding distortion. The validity of this prediction method must also be clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM), which uses line heating as the optimum distortion control method. The validity of this method was substantiated by a number of numerical simulations and actual measurements.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.75-79
• /
• 2003

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM) using the line heating as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.700-705
• /
• 2002

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by the distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. In order to minimize the weld-induced angular distortion in thick weldments, this paper proposes the optimum groove design for various plate thicknesses as the distortion control method. The validity of this method has been substantiated by a number of numerical simulations and experiments.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.68-74
• /
• 2006

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the mechanical tensioning method (MTM) as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.270-280
• /
• 2013

A fast intra-prediction method is proposed for High Efficiency Video Coding (HEVC) using a fast intra-mode decision and fast coding unit (CU) size decision. HEVC supports very sophisticated intra modes and a recursive quadtree-based CU structure. To provide a high coding efficiency, the mode and CU size are selected in a rate-distortion optimized manner. This causes a high computational complexity in the encoder, and, for practical applications, the complexity should be significantly reduced. In this paper, among the many predefined modes, the intra-prediction mode is chosen without rate-distortion optimization processes, instead using the difference between the minimum and second minimum of the rate-distortion cost estimation based on the Hadamard transform. The experiment results show that the proposed method achieves a 49.04% reduction in the intra-prediction time and a 32.74% reduction in the total encoding time with a nearly similar coding performance to that of HEVC test model 2.1.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.278-281
• /
• 2009

In this paper, we propose a fast partial distortion algorithm using normalized dithering matching scan to get uniform distribution of partial distortion which can reduce only unnecessary computation significantly. Our algorithm is based on normalized dithering order matching scan and calibration of threshold error using LOG value for each sub-block continuously for efficient elimination of unlike candidate blocks while keeping the same prediction quality compared with the full search algorithm. Our algorithm reduces about 60% of computations for block matching error compared with conventional PDE (partial distortion elimination) algorithm without any prediction quality, and our algorithm will be useful to real-time video coding applications using MPEG-4 AVC or MPEG-2.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.797-806
• /
• 2009

The mechanical and thermal behaviors of polyamide-6/clay nanocomposites were studied using the continuum-based, micromechanical models such as Mori-Tanaka, Halpin-Tsai and shear lag. Mechanic-based model prediction provides a better understanding regarding the dependence of the nanocomposites' reinforcement efficiency on conventional filler structural parameters such as filler aspect ratio ($\alpha$), filler orientation (S), filler weight fraction (${\Psi}_f$), and filler/matrix stiffness ratio ($E_f/E_m$). For an intercalated and exfoliated nanocomposite, an effective, filler-based, micromechanical model that includes effective filler structural parameters, the number of platelets per stack (n) and the silicate inter-layer spacing ($d_{001}$), is proposed to describe the mesoscopic intercalated filler and the nanoscopic exfoliated filler. The proposed model nicely captures the experimental modulus behaviors for both intercalated and exfoliated nanocomposites. In addition, the model prediction of the heat distortion temperature is examined for nanocomposites with different filler aspect ratio. The predicted heat distortion temperature appears to be reasonable compared to the heat distortion temperature obtained by experimental tests. Based on both the experimental results and model prediction, the reinforcement efficiency and heat resistance of the polyamide-6/clay nanocomposites definitely depend on both conventional (${\alpha},\;S,\;{\Psi}_f,\;E_f/E_m$) and effective (n, $d_{001}$) filler structural parameters.