• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권4호
• /
• pp.195-202
• /
• 2016

안경식 3차원 입체영상 콘텐츠에 대한 사용자 평가는 객관적/주관적 평가 방법을 활용하여 많은 연구가 이루어지고 있지만 무안경식 3차원 입체 영상 콘텐츠에 대한 사용자 평가는 미비한 실정이며 특히 생체신호를 적용한 객관적 평가에 대한 연구는 거의 이루어지지 않고 있다. 이에 본 연구에서는 무안경 입체 영상 화질에 대한 객관적 사용자 평가 도구개발을 위한 사전연구로서 무안경 입체영상 화질 변화에 따른 뇌파(Electroencephalogram, EEG)의 변화를 분석하였다. 이를 위하여 무안경식 입체영상 시스템의 디스플레이로 활용되고 있는 렌티큘러 방식 입체 영상을 최적입체영상과 왜곡입체영상으로 구분하여 제작하고, 이를 총 26명의 피험자에게 차례로 제시하며 8개 채널의 뇌파를 측정하였다. 각 영상 시청시 획득한 뇌파를 채널별과 주파수별로 분류하여 통계적 상관관계를 분석하였다. 분석 결과 뇌파진동 중 알파파의 경우 최적입체영상과 왜곡입체영상 사이에서 통계적으로 유의미한 차이가 확인되지 않았으나 베타파의 경우 통계적으로 유의미한 차이가 확인되었다. 베타파의 경우 왜곡입체영상에서 최적입체영상보다 통계적으로 유의미하게 높게 나타났으며 이는 왜곡입체영상 시청 시 피로감 또는 불안감 증폭에 따른 베타파의 뇌파활동이 높아진 것으로 해석된다. 본 연구결과를 바탕으로 뇌파분석 기법이 렌티큘러 방식의 무안경 입체영상 화질 평가를 위한 객관적 평가 수단으로 활용될 수 있는 가능성을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1490-1493
• /
• 2007

We proposed the method to take 3D image having correct depths to the front and rear directions when the stereogram was displayed to an observer through an optical system. Since the magnified stereogram by lenses was not given correct depth to an observer despite having the same magnified disparity. Consequently, we achieved our goal by relations of compensated disparities to both directions with magnification of lenses, viewing distance and base distance of viewer in AFIS.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.41-47
• /
• 2004

As mechanical structures are minimized, the demand on micro dies and molds has increased. Machining complex 3D shapes requires fabrication procedures for preparing the electrodes. Micro electrical discharge milling using a simple shape electrode can produce 3D micro structure. In this paper the machining characteristics of micro electrical discharge milling according to depth of cut and capacitance are investigated. The machining time is diminished when simple tool-paths and algorithms for changing the feedrate are applied. But a distorted bottom shape and a tapered wall shape are inevitable after machining. The distorted bottom shape and the taper angle of wall are reduced by finish machining.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.455-463
• /
• 2016

This paper proposes a compensation method to improve the distorted space vectors when a 3-level Neutral Point Clamped (NPC) inverter has an unbalanced neutral point voltage. Since both the neutral point voltage of the DC link and the space vector of a 3-level NPC inverter are closely related depending on the output load connecting state, a distorted space vector can occur when the neutral point voltage of a 3-level NPC inverter is unbalanced. The proposed method can improve the distorted space vectors by adjusting the injection time of the small and medium vectors and by modulating the amplitude of the carrier waveforms. In this paper, the proposed method is verified by both simulation and experimental results based on a 3-level NPC inverter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1514-1517
• /
• 2005

The $(Y,Gd)BO_3:Eu^{3+}$ phosphor was made by coprecipitation method. The precipitated powders were amorphous. The value of pH in the process of coprecipitation was critical for the luminescence of phosphors. The particle size and morphology were influenced by pH value. The lower calcination temperature and hydrothermal synthesis leads to the distortion of lattices. The distorted lattices changed the symmetry of $Eu^{3+}$ site. The broken inversion symmetry in the distorted lattice caused the increased emission of $^5D_0{\rightarrow}^7D_2$ transition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.859-866
• /
• 2001

During the Pre-service Inspection for Wolsong Unit 3&4 in 1997/1998 respectively, 17 Distorted Roll Transition indications(over expanded beyond tubesheet secondary face) were identified at the Unit 4 (S/G B, D). Six(6) tubes out of these tubes were plugged in 1998. However the first Periodic Inspection identified additional 110 indications in 1999 and 2000. The additionally identified 110 indication call, not reported at the Pre-service Inspection, are; 2 Not-Finally-Expanded-Tubes and 108 Distorted Roll Transition tubes. Design limit of each Steam Generator tube Plugging is 6.4%. Plugging was performed by the Steam Generator manufacturer under the warranty. When Distorted Roll Transition indications were first identified on the Unit 4 in 1998 the degree of Over-expansion was measured using an inner dial-gage to make the disposition of Nonconformance report. 2 Not-Finally-Expanded-Tubes were plugged and 10 tubes out of 108 Distorted Roll Transition Tubes were also plugged as a preventive measure.

• 대한화학회지
• /
• 제34권1호
• /
• pp.37-43
• /
• 1990

$D_{2d}$ 점군에 속하는 강결정장의 tetragonally 일그러진 사면체 3$d^9$전자계 착물의 바닥상태에 대한 리간드 궤도함수의 spin-orbit coupling과 중심 금속의 3d와 4p궤도함수의 intermixing이 미치는 영향에 대하여 중첩 섭동론을 사용하여 연구하였다. 단결정 $Cs_2CuCl_4$의 tetragonally 일그러진 $CuCl_4^{2-}$에 대한 d-d전이의 실험값을 사용한 LCAO-MO분석은 구리이온과 리간드 사이의 공유결합성은 Cu 4p orbital의 기여가 증가하므로서 급격히 감소하고 리간드 Cl 3p궤도함수의 spin-orbit coupling 상호작용에 의한 바닥상태의 에너지 준위 분리에 대한 효과는 $\Gamma_7(E)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_7(E)$의 순서로 감소하였다.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1247-1254
• /
• 2018

We study the uncertainty stemming from different theoretical models in the spectroscopic factors extracted from experiments. We use three theoretical approaches, the distorted wave Born approximation (DWBA), the adiabatic distorted wave approximation (ADWA) and the continuum discretized coupled-channels method (CDCC), and analyze the $^{12}C(d,p)^{13}C$, $^{14}C(d,p)^{15}C$ reactions. We find that the uncertainty associated with the adopted theoretical models is less than 20%. We also investigate the contribution from the remnant term and observe that it gives less than 10% uncertainty. We finally make an attempt to explain the discrepancy in the spectroscopic factors of $^{17}C(\frac{3}{2}^+)$ between the ones extracted from experiments and from shell model calculations by analyzing the $^{16}C(d,p)^{17}C$ reaction.

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.618-625
• /
• 1991

A general expression adopting a nonmultipole expansion method is derived for pseudocontact contribution to the NMR chemical shift arising from the electron orbital angular momentum and electron spin dipolar-nuclear spin angular momentum interaction of $3d^9$ system in a strong crystal field of tetragonally distorted tetrahedral symmetry. From this expression all the multipolar term are determined and the exact solution of ${\Delta}$B/B(ppm) is compared with the multipolar term. The $1/R^5$ term in the multipolar terms contributes dominantly to the NMR chemical shift but the other terms are certainly significant except that of the <111> axis. In addition, an analysis of the temperature dependence of the NMR chemical shift further illustrates that considerable care must be taken in interpeting NMR results in paramagnetic system.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.386-389
• /
• 2007

TV technology started from black and white TV. Color TV invented and users request more realistic TV technology. The next technology is 3DTV. For 3DTV, 3D display technology, 3D coding technology, digital mux/demux technology in broadcast and 3D video acquisition are needed. Moreover, Almost every contents now exist are 2D contents. It causes necessity to convert from 2D to 3D. This article describes 2D/3D conversion algorithm and H/W platform on FPGA board. Time difference makes 3D effect and convolution filter increased the effect. Distorted image and original image give 3D effect. The algorithm is shown on 3D display. The display device shows 3D effect by parallax barrier method and has FPGA board.