• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.4
• /
• pp.195-202
• /
• 2016

There have been many studies on subject tests for 3D contents using 3D glasses, but there is a limited research for 3D contents using autostereoscopic display. In this study, we investigated to assess usability of electroencephalogram (EEG) as an objective evaluation for 3D contents with different quality using autosteroscopic display, especially for lenticular lens type. The image with optimal quality and the image with distorted quality were separately generated for autostereosopic display with lenticular lens type and displayed sequentially through lenticular lens for 26 subjects. EEG signals of 8 channels from 26 subjects exposed to those images were detected and correlation between EEG signal and the quality of 3D images were statistically evaluated to check differences between optimal and distorted 3D contents. What we found was that there was no statistical significance for a wave vibration, however b wave vibration shows statistically significant between optimal and distorted 3D contents. b wave vibration observed for the distorted 3D image was stronger than that for the optimal 3D image. This results suggest that subjects viewing the distorted 3D contents through lenticular lens experience more discomfort or fatigue than those for the optimum 3D contents, which resulting in the greater b wave activity for those watching the distorted 3D contents. In conclusion, these results confirm that electroencephalogram (EEG) analysis can be used as a tool for objective evaluation of 3D contents using autosteroscopic display with lenticular lens type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1490-1493
• /
• 2007

We proposed the method to take 3D image having correct depths to the front and rear directions when the stereogram was displayed to an observer through an optical system. Since the magnified stereogram by lenses was not given correct depth to an observer despite having the same magnified disparity. Consequently, we achieved our goal by relations of compensated disparities to both directions with magnification of lenses, viewing distance and base distance of viewer in AFIS.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.41-47
• /
• 2004

As mechanical structures are minimized, the demand on micro dies and molds has increased. Machining complex 3D shapes requires fabrication procedures for preparing the electrodes. Micro electrical discharge milling using a simple shape electrode can produce 3D micro structure. In this paper the machining characteristics of micro electrical discharge milling according to depth of cut and capacitance are investigated. The machining time is diminished when simple tool-paths and algorithms for changing the feedrate are applied. But a distorted bottom shape and a tapered wall shape are inevitable after machining. The distorted bottom shape and the taper angle of wall are reduced by finish machining.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.455-463
• /
• 2016

This paper proposes a compensation method to improve the distorted space vectors when a 3-level Neutral Point Clamped (NPC) inverter has an unbalanced neutral point voltage. Since both the neutral point voltage of the DC link and the space vector of a 3-level NPC inverter are closely related depending on the output load connecting state, a distorted space vector can occur when the neutral point voltage of a 3-level NPC inverter is unbalanced. The proposed method can improve the distorted space vectors by adjusting the injection time of the small and medium vectors and by modulating the amplitude of the carrier waveforms. In this paper, the proposed method is verified by both simulation and experimental results based on a 3-level NPC inverter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1514-1517
• /
• 2005

The $(Y,Gd)BO_3:Eu^{3+}$ phosphor was made by coprecipitation method. The precipitated powders were amorphous. The value of pH in the process of coprecipitation was critical for the luminescence of phosphors. The particle size and morphology were influenced by pH value. The lower calcination temperature and hydrothermal synthesis leads to the distortion of lattices. The distorted lattices changed the symmetry of $Eu^{3+}$ site. The broken inversion symmetry in the distorted lattice caused the increased emission of $^5D_0{\rightarrow}^7D_2$ transition.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.859-866
• /
• 2001

During the Pre-service Inspection for Wolsong Unit 3&4 in 1997/1998 respectively, 17 Distorted Roll Transition indications(over expanded beyond tubesheet secondary face) were identified at the Unit 4 (S/G B, D). Six(6) tubes out of these tubes were plugged in 1998. However the first Periodic Inspection identified additional 110 indications in 1999 and 2000. The additionally identified 110 indication call, not reported at the Pre-service Inspection, are; 2 Not-Finally-Expanded-Tubes and 108 Distorted Roll Transition tubes. Design limit of each Steam Generator tube Plugging is 6.4%. Plugging was performed by the Steam Generator manufacturer under the warranty. When Distorted Roll Transition indications were first identified on the Unit 4 in 1998 the degree of Over-expansion was measured using an inner dial-gage to make the disposition of Nonconformance report. 2 Not-Finally-Expanded-Tubes were plugged and 10 tubes out of 108 Distorted Roll Transition Tubes were also plugged as a preventive measure.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.37-43
• /
• 1990

An effect of the spin-orbit coupling interaction of ligand orbitals and the intermixing │3d 〉and│4p > transition metal atomic orbitals on the ground state for a 3$d^9$ system in a strong crystal field of tetragonally distorted tetrahedral symmetry that belongs to the $D_{2d}$ point group has been investigated in this work, applying the degenerate perturbation theory. An LCAO-MO analysis in terms of the known energies of the d-d transitions for the tetragonally distorted $CuCl_4^{2-}$ ion in a single crystal of$Cs_2CuCl_4$shows that the covalent mixing of Cu 3d and ligand Cl 3p orbitals decreases dramatically with increasing Cu 4p contribution. The extent of effect on the energy level splitting for the ground state by the spin-orbit coupling interaction of ligand orbitals decreases significantly in orderTEX>$\Gamma_7(E)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_7(E)$.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1247-1254
• /
• 2018

We study the uncertainty stemming from different theoretical models in the spectroscopic factors extracted from experiments. We use three theoretical approaches, the distorted wave Born approximation (DWBA), the adiabatic distorted wave approximation (ADWA) and the continuum discretized coupled-channels method (CDCC), and analyze the $^{12}C(d,p)^{13}C$, $^{14}C(d,p)^{15}C$ reactions. We find that the uncertainty associated with the adopted theoretical models is less than 20%. We also investigate the contribution from the remnant term and observe that it gives less than 10% uncertainty. We finally make an attempt to explain the discrepancy in the spectroscopic factors of $^{17}C(\frac{3}{2}^+)$ between the ones extracted from experiments and from shell model calculations by analyzing the $^{16}C(d,p)^{17}C$ reaction.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.618-625
• /
• 1991

A general expression adopting a nonmultipole expansion method is derived for pseudocontact contribution to the NMR chemical shift arising from the electron orbital angular momentum and electron spin dipolar-nuclear spin angular momentum interaction of $3d^9$ system in a strong crystal field of tetragonally distorted tetrahedral symmetry. From this expression all the multipolar term are determined and the exact solution of ${\Delta}$B/B(ppm) is compared with the multipolar term. The $1/R^5$ term in the multipolar terms contributes dominantly to the NMR chemical shift but the other terms are certainly significant except that of the <111> axis. In addition, an analysis of the temperature dependence of the NMR chemical shift further illustrates that considerable care must be taken in interpeting NMR results in paramagnetic system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.386-389
• /
• 2007

TV technology started from black and white TV. Color TV invented and users request more realistic TV technology. The next technology is 3DTV. For 3DTV, 3D display technology, 3D coding technology, digital mux/demux technology in broadcast and 3D video acquisition are needed. Moreover, Almost every contents now exist are 2D contents. It causes necessity to convert from 2D to 3D. This article describes 2D/3D conversion algorithm and H/W platform on FPGA board. Time difference makes 3D effect and convolution filter increased the effect. Distorted image and original image give 3D effect. The algorithm is shown on 3D display. The display device shows 3D effect by parallax barrier method and has FPGA board.