• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.715-723
• /
• 2012

The Hoelyongpo in the Naeseong River as tributary basin of the Nakdong River is broadly well-known a tourist attraction, which is made of sandy beach, and is called "Island of Inland". But Construction of the Dam was planned at upstream of river. In other words, an influx of sediment is blocked from upstream of river. In this situation, through sediment discharge coming from tributary of the Naeseong river, the whether to go ahead of sand beach of the Hoelyongpo is analyzed by using 1-D and 2-D model. The sediment discharge is estimated through ratio raw with basin area, and the instream flow requirement of river coming from dam and the flow rate and sediment coming from tributary are inputted for model. The 1-D model uses HEC-6 and the 2-D model uses SMS(RMA2 and SED2D). The analysis using the HEC-6 is performed from cross section data 10 year ago to the present cross section. Consequently, Yang equation presenting similar result to the present cross section data is determined, using this, the prediction is conducted for the cross section after 20 years. The 2-D analysis is conducted for the present cross section data. The value of distinction between a deposition and erosion with the results presented in the 1, 2-D models is occur, however, the appearance between the deposition and the erosion is similar.

• Journal of Integrative Natural Science
• /
• v.11 no.2
• /
• pp.93-100
• /
• 2018

Caspases, a family of cysteinyl aspartate-specific proteases plays a central role in the regulation and the execution of apoptotic cell death. Caspase-3 has been proven to be an effective target for reducing the amount of cellular and tissue damage because the activation of caspases-3 stimulates a signalling pathway that ultimately leads to the death of the cell. In this study, Hologram based Quantitative Structure Activity Relationship (HQSAR) models was generated on a series of Caspase-3 inhibitors named 3, 4-dihydropyrimidoindolones derivatives. The best HQSAR model was obtained using atoms, bonds, and hydrogen atoms (A/B/H) as fragment distinction parameter using hologram length 61 and 3 components with fragment size of minimum 5 and maximum 8. Significant cross-validated correlation coefficient ($q^2=0.684$) and non cross-validated correlation coefficients ($r^2=0.754$) were obtained. The model was then used to evaluate the eight external test compounds and its $r^2_{pred}$ was found to be 0.559. Contribution map show that presence of pyrrolidine sulfonamide ring and its bulkier substituent's makes big contributions for improving the biological activities of the compounds.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.118-127
• /
• 2009

This study tries to develop model in order to assess personal factors of senior traffic accidents that are widely recognized as one of the social problems. For the current practice. it gathers data (Simulation & Questionnaire Survey) of KOTSA and conducts Poisson and Negative Binomial Regression Analysis to develop traffic accident severity model. The results show that elderly drivers' accidents are mainly affected by attentiveness selection, velocity prediction ability and attentiveness distribution ability in a positive(+) way. Second, non-senior drivers' accidents are also positively(+) influenced by attentiveness selection, velocity prediction, distance perception, attentiveness distribution ability and attentiveness diversion ability. Therefore, influencing factors of senior and non-senior drivers to vehicle accidents are different. This eventually poses a indication that preliminary education for car accident prevention should be implemented based up[n the distinction between senior drivers and non-senior drivers.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.305-311
• /
• 2019

In this study, present the most useful delay scan time by statistical analysis of SUVm data for 30 suspected pancreatic cancer patients. Two statistical analysis and a mathematical model was applied to the theoretical formula by glucose and insulin mechanics, and a mathematical model was created. Statistical analysis was performed via Metlab p/g. Optimal delay scan time was suggested by Metlab p/g for the change of SUV value over time.In this study, for diagnosis pancreatic cancer by dual time point PET/CT, propose optimal delay scan time 131.5 minuts. The proposed delay scan time showed statistical reliability applicable to the diagnosis of pancreatic cancer (p<0.05). Delayed scanning with the suggested delay scan time of 131.5 minutes is considered to be useful for the diagnosis of pancreatic cancer compared to general PET / CT scan.hen the delayed test is performed with the proposed delay scan time 131.5 minuts, Compared with general PET/CT scans.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.444-454
• /
• 2005

Recently, the requirements of multi-resolution models of a solid model, which represent an object at multiple levels of feature detail, are increasing for engineering tasks such as analysis, network-based collaborative design, and virtual prototyping and manufacturing. The research on this area has focused on several topics: topological frameworks for representing multi-resolution solid models, criteria for the level of detail (LOD), and generation of valid models after rearrangement of features. As a solution to the feature rearrangement problem, the new concept of the effective zone of a feature is introduced in the former part of the paper. In this paper, we propose a feature-based non-manifold modeling system to provide multi-resolution models of a feature-based solid or non-manifold model on the basis of the effective feature zones. To facilitate the implementation, we introduce the class of the multi-resolution feature whose attributes contain all necessary information to build a multi-resolution solid model and extract LOD models from it. In addition, two methods are introduced to accelerate the extraction of LOD models from the multi-resolution modeling database: the one is using an NMT model, known as a merged set, to represent multi-resolution models, and the other is storing differences between adjacent LOD models to accelerate the transition to the other LOD. We also suggest the volume of the feature, regardless of feature type, as a criterion for the LOD. This criterion can be used in a wide range of applications, since there is no distinction between additive and subtractive features unlike the previous method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.100.1-100.1
• /
• 2011

Electrochemical impedance spectroscopy(EIS) are using widely as a useful technique mainly in the field of electrochemical for the analysis of electrode reactions or characteristics of the composites. The response analysis of the systems technique provides comprehensive informations about the characteristic and structure of complex and internal reaction. The EIS is the method to measure impedance of the measurement target classified by the frequency, it select the equivalent impedance model to give same response from the result and it calculate the parameter. Therefore, the chemical reaction inside the fuel cell is to modeling to electrical impedance. And as repeating the same experiment in each of the operating point, we can get each different parameter. As a result, we can establish the equivalent impedance model in each operating point. Therefore, if we use these models, we can evaluate the fuel cell without the internal design parameter of the fuel cell as required in existing modeling. The EIS is used typically technique for distinguish status of fuel cell called SOH(State Of Health). When the fuel cell is degradation, Efficiency and health of the fuel cell is reduced because internal impedance is increase. As usage of these principles, we can evaluate state of fuel cell through the impedance analysis of fuel cells. In this study, we are presents EIS distinction system and algorithm for residential fuel cell systems. At the time of the fuel cell installation in the fields, the EIS system and proposed algorithm will be able to apply as technique for efficiency and performance evaluation about fuel cell system.

• School Mathematics
• /
• v.5 no.4
• /
• pp.477-506
• /
• 2003

In this paper, we analyze nine-grade students' conceptions of parameters, their relation to unknowns and variables and the process of understanding of letters in problem solving of equations and functions. The roles of letters become different according to the letters-used contexts and the meaning of letters Is changed in the process of being used. But, students do not understand the meaning of letters correctly, especially that of parameter. As a result, students operate letters in algebraic expressions according to the syntax without understanding the distinction between the roles. Therefore, the parameter of learning should focus on the dynamic change of roles and the flexible thinking of using letters. We develop a self-regulation model based on the monitoring working question in teaching-learning situations. We expect that this model helps students understand concepts of letters that enable to construct meaning in a concrete context.

• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.127-131
• /
• 2007

The molecular design and holographic (H) quantitative structure-activity relationships (HQSARs) on the binding affinity constants between new 3-benzylidenemyosmine analogues and nicotin acetylcholine receptors (nAChRs) of American cockroach (Periplaneta. americana L.) were studied quantitatively. The optimized HQSAR model (IV-2) for the binding affinity constants was derived from fragment distinction of hydrogene atoms in fragment size, 5${\sim}$8 bin. The statistical results of the HQSAR model (IVI-2) exhibited the best predictability and fitness for the binding affinity constants based on the cross-validated value (q$^2$=0.507) and non cross-validated value (r$^2_{nev.}$=0.944). From the graphical analyses of atomic contribution maps, it was revealed that the binding affinity constants depends upon the anabaseine ring in molecule and the most active compounds were designed by optimized HQSAR model (VI-2).

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.447-467
• /
• 1999

Most published work on product quality focuses on manufactured goods. The subject of service quality has received less attention. This distinction is important because some of the quality-improving strategies avaliable to manufacturers may be inappropriate for service firms. Services are performances, not objects. They are often produced in the presence of the customer, as in the cause of hotel restaurant services, quality occurs during service delivery, usually in an interaction between the customer and contact personnel of service firm. for this reason, service quality is highly dependent on the performance of employees, an organizational resource that cannot be controlled to the degree that components of tangible goods can be engineered. The study has begun as a basic study for customer satisfaction-oriented management in understanding the service quality of food & beverage products and through a systematic analysis of it. The major purpose of the study was to examine the relationship of the customer satisfaction and service quality in consideration of reliability, empathy, responsiveness, tangibility and assurance. An empirical research was conducted based on the previous theoretical studies. 286 customer at first class hotels in Seoul were selected as samples of this study. The time period of research was from February through March 1999, and answers were processed by SAS to yield frequency analysis, multivariate statistical analysis and regression analysis. The finding of the statistical treatment are frequencies, factor analysis, multiple regression analysis, path analysis. SERVQUAL method was used the service quality evaluation methods. After factor analysis, it was resulted to 3 factors. those were factor 1(assurance.empathy.responsiveness), factor 2(reliability), factor 3(tangibility). The findings of the statistical treatment are as follows. First, the attribute measurement of performance service quality was affected by customer satisfaction. Second, the attribute measurement of performance service qualify was affected by repurchase intention. Third, The attribute measurement of performance customer satisfaction was affected by repurchase intention. The result of study model was followed, service quality was affected repurchase intention than customer satisfaction. indirected effect through, service duality and customer satisfaction was affected repurchase intention.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.942-946
• /
• 2006

We simulated insulation defects of stator winding wire on high voltage generator by 5 types. 4 types have one discharge source and other one has multi discharge source by simulation. For accurate decision, measurements used to PRPD pattern to occurred partial discharge source of various types. In this research, when PRPD pattern carried out or analyzed pattern recognition of discharge source, it used to powerful tools. In this result, PRPD Pattern defined to have single discharge source of 4 types by insulation defect. When insulation defect simulated, all the defected winding have not the same result. Errors for a little different can make mistakes from a subtle distinction. The difference between internal and void discharge have magnitude of pulse amplitude of inner discharge bigger than void discharge and have a shape of bisymmetry. But void discharge has a shape of bisymmetry against maximum value on polarity respectively. In cases of slot and surface discharge, we confirmed to show similar results those other researchers. In case of multi-discharge, as a result of we could classify not perfect match with occurred patterns in single discharge eachother. In the future, we will have to recognize and classify with results of multi-discharge.