• 한국통신학회논문지
• /
• 제41권7호
• /
• pp.754-764
• /
• 2016

최근 들어 다양한 SNS(Social Network Service)에 대한 이해와 분석을 위해 가장 중요한 두 종류의 망인 small-world와 scale-free망에 대한 많은 연구가 수행되고 있다. 본 연구에서는 두 개의 입력 파라미터를 적절히 조정함으로서 small-world 망, scale-free 망 혹은 두 개의 성질을 동시에 모두 갖는 망을 생성 할 수 있는 보다 일반화된 망 생성 방법을 제안하였다. 두개의 입력 파라미터중 하나는 small-world 성질을 나태내주는 파라미터고 다른 하나는 scale-free와 small-world 성질 모두를 나타내주는 파라미터다. Small-world와 scale-free를 나타내주는 망의 성질로 군집계수, 평균 최단거리 그리고 power-law 상수를 이용하였다. 본 연구에서 제안한 방법을 사용하면 small-world 망과 scale-free 망의 성질과 관계에 대한 보다 명확한 이해를 할 수 있다. 다양한 여러 예제들을 통하여 두 개의 입력 파라미터들이 군집계수, 평균 최단거리 그리고 power-law 상수에 미치는 영향을 검증하였다. 이를 통해 어떠한 입력 파라미터들의 조합이 small-world 망, scale-free 망 혹은 두 개의 성질을 모두 갖는 망을 생성 할 수 있는지를 조사하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.30-37
• /
• 2005

We present an air bridge type electrode system with tunable electrode distance for detecting electroactive biomolecules. It is known that the narrower gap between electrode fingers, the higher sensitivity in IDA (interdigitated array) electrode. In previous researches on IDA electrode, narrower patterning required much precise and expensive equipment as the gap goes down to nanometer scale. In this paper, an improved method is suggested to replace nano gap pattering with downsizing electrode distance and showed that the patterning can be replaced by thickness control using metal deposition methods, such as electroplating or metal sputtering. The air bridge type electrode was completed by the following procedures: gold patterning for lower electrode, copper electroplating, gold deposition for upper electrode, photoresist patterning for gold film support, and copper etching for space formation. The thickness of copper electroplating is the distance between upper and lower electrodes. Because the growth rate of electroplating is $0.5{\mu}m\;min^{-1}$, the distance is tunable up to hundreds of nanometers. Completed electrodes on the same wafer had $5{\mu}m$ electrode distance. The gaps between fingers are 10, 20, 30, and $40{\mu}m$ and the widths of fingers are 10, 20, 30, 40, and $50{\mu}m$. The air bridge type electrode system showed better sensitivity than planar electrode.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.121-127
• /
• 2013

In this paper, we propose a distance measurement system for automatic berthing control using a stereo camera mounted on a rotation control device, and a radial pattern target. Automatically controlling the position and attitude of a ship aims to prevent maritime accidents due to human error. Our goal is to measure the relative distance between a ship and an onshore or offshore target for berthing. Therefore, the distance should be continuously measured while tracking a fixed point on a target. To this end, we developed a stereo camerabased distance measurement system that satisfied these requirements. This paper describes the structure and principle of the measurement system. We validate the distance error for target incline due to the relative position and attitude between a camera and a target in miniature scale. In addition, the findings of an experiment in an outdoor environment demonstrate that the proposed measurement system has accuracy within 1 m at a range of 20-100 m which is the acceptable accuracy for automatic berthing.

• 환경영향평가
• /
• 제17권2호
• /
• pp.133-141
• /
• 2008

The loss, alteration, and fragmentation of habitat have led to a reduction of biodiversity. The growing awareness of the negative effects of habitat fragmentation on natural systems has resulted in conservation strategy that is concerned with not only population and habitat level but also ecosystem and landscape level. Especially, ecological network to link core areas or major habitat patches is one of the most important issues. Recently, landscape connectivity is increasingly used in decision making for fragmented landscape management in order to conserve the biodiversity in the regional scale. The objective of this study was to find potential forest as a ecological corridor in Go-yang city, Gyung-gi province using cost-distance modelling method that can measure connectivity based on animal movement. 'Least cost-distance' modelling based on functional connectivity can be useful to establish ecological network and biodiversity conservation plan. This method calculates the distance modified with the cost to move between habitat patches based on detailed geographical information on the landscape as well as behavioural aspects of the animal movement. The least cost-distance models are based on two biologically assumptions: (1) dispersers have complete knowledge of their surroundings, and (2) they do select the least cost route from this information. As a result of this study, we can find wildlife moving route for biodiversity conservation. The result is very useful for long-term aspect of biodiversity conservation plan in regional scale, because this is reflection of geographical information and behavioural aspects of the animal movement.

• 화약ㆍ발파
• /
• 제8권1호
• /
• pp.3-16
• /
• 1990

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill $\varphi{70mm}$ on the calcalious sand stone(sort-moderate-semi hard Rock). The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites (m) W : Maximum Charge per delay-period of eighit milliseconds or more(Kg) K : Ground transmission constant, empirically determind on th Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity $D/W^b$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m----under l00m----- $V=41(D/3\sqrt{W})^{-1.41}$ -----A Over l00m-----$V= 121(D/3\sqrt{W})^{-1.66}$-----B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 기술사
• /
• 제24권6호
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.3-12
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2470-2491
• /
• 2018

Web-scale open information extraction (Open IE) plays an important role in NLP tasks like acquiring common-sense knowledge, learning selectional preferences and automatic text understanding. A large number of Open IE approaches have been proposed in the last decade, and the majority of these approaches are based on supervised learning or dependency parsing. In this paper, we present a novel method for web scale open information extraction, which employs cosine distance based on Google word vector as the confidence score of the extraction. The proposed method is a purely unsupervised learning algorithm without requiring any hand-labeled training data or dependency parse features. We also present the mathematically rigorous proof for the new method with Bayes Inference and Artificial Neural Network theory. It turns out that the proposed algorithm is equivalent to Maximum Likelihood Estimation of the joint probability distribution over the elements of the candidate extraction. The proof itself also theoretically suggests a typical usage of word vector for other NLP tasks. Experiments show that the distance-based method leads to further improvements over the newly presented Open IE systems on three benchmark datasets, in terms of effectiveness and efficiency.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권9호
• /
• pp.683-690
• /
• 2009

은닉 마코프 모델(Hidden Markov Model: HMM)에 기반을 둔 온라인 한자 인식에서 클래스의 수가 대용량일 경우에는 인식에 걸리는 시간 증가가 좋은 인식 시스템을 구현하는데 있어서의 걸림돌이 된다. 본 논문에서는 이러한 인식 속도 문제를 해결하고자 HMM을 클러스터링하여 인식 속도를 개선하는 방법과 이에 적합한 효율적인 HMM 간의 거리계산법을 제안한다. 유니코드 한 중 일 통합한자로 정의된 총 20,902개의 한자에 대한 온라인 한자 인식 시스템을 구축하는 실험에서 약 2배 정도로 인식속도가 향상됨을 확인할 수 있었고 클러스터링을 하지 않았을 때보다 0.9%의 인식률만 하락한 95.37%의 10순위 인식률을 달성했다.

• 터널과지하공간
• /
• 제14권4호
• /
• pp.269-274
• /
• 2004

본 연구에서는 터널에서 화재 발생시 역기류의 위치를 결정하기 위하여 축소실험을 실시하였다. Froude 상사를 사용하여 1/20로 축소된 모형터널에서 실험을 실시하였으며 가연물질로는 에탄올을 사용하였다. 한 변의 길이가 8-16cm의 화원을 사용하였으며 발열량은2.47-12.30㎾이다. 터널 단면의 종횡비(터널높이/터널폭)가 증가할수록 역기류를 제어하기 위해 더 큰 배연 풍속이 요구됨을 확인하였다. L$_{B}$$^{*}$ ＜5일 때 역기류를 막기 위한 배연속도가 0.25승에서부터 발열량에 비례하여 증가한다. L$_{B}$$^{*}$ $\geq$5에서는 발열량의 0.3승에 비례한다.