• 제목/요약/키워드: distance relay

검색결과 238건 처리시간 0.024초

부하 특성에 따른 교류 급전시스템에서의 보호방식 연구 (A Study on Protection system to the Load Characteristics on the AC Feeder System)

  • 정호성;한문섭;이장무;김주락
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 B
    • /
    • pp.1370-1372
    • /
    • 2004
  • At present. distance relay and ${\Delta}I$ current increment relay are used as primary and secondary protection in the AC feeder system. However. electric railway vehicles according to power electronic's development had developed resistance control, thyristor phase control and PWM control system. and operation of train is increasing in a feeder section. Therefore this paper analyzes the load characteristics and situation of relay's maloperation caused by load current increase, harmonics, regenerative braking current and operation of the different vehicles in same feeder section. Based on this analysis. this paper proposes consideration items for relay correction and advanced adaptive relay that can change operation area according to load current.

  • PDF

실시간 전력계통 시뮬레이터를 이용한 보호계전모델 개발 (Implementation and Verification of Distance Relay Models for Real Time Digital Simulator)

  • 이주훈;윤용범;차승태;이진;최종웅
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권7호
    • /
    • pp.393-400
    • /
    • 2003
  • This paper discusses how to implement and verify a software model of the digital relay that can be added to real time digital simulator(RTDS) model library and is then subjected to the same outputs as the actual relay. The software model is stand-alone and can be used with real relays. It is also possible to conduct interactive real-time tests when the system effects of the relay action need to be investigated. The characteristics of mho type and the quadrilateral type, which is commonly used in recently developed relays, are modeled in this paper. Single circuit line and double circuit line system are used for model verification. The transmission lines are each 100 km in length and are modeled as distributed parameter lines but not frequency dependent. The transmission lines in the single circuit system are modeled as ideally transposed line. The mutual coupling data with the parallel line was taken account in the transmission lines for the double circuit system. The main CTs and PTs are included and operated in their linear region during the tests. For the purpose of testing the relay model accuracy the faults have been applied at various points on the protected line. Its accuracy is assessed against theoretical values.

Cooperative Nano Communication in the THz Gap Frequency Range using Wireless Power Transfer

  • Samarasekera, A. Chaminda J.;Shin, Hyundong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권10호
    • /
    • pp.5035-5057
    • /
    • 2019
  • Advancements in nanotechnology and novel nano materials in the past decade have provided a set of tools that can be used to design and manufacture integrated nano devices, which are capable of performing sensing, computing, data storing and actuation. In this paper, we have proposed cooperative nano communication using Power Switching Relay (PSR) Wireless Power Transfer (WPT) protocol and Time Switching Relay (TSR) WPT protocol over independent identically distributed (i.i.d.) Rayleigh fading channels in the Terahertz (THz) Gap frequency band to increase the range of transmission. Outage Probability (OP) performances for the proposed cooperative nano communication networks have been evaluated for the following scenarios: A) A single decode-and-forward (DF) relay for PSR protocol and TSR protocol, B) DF multi-relay network with best relay selection (BRS) for PSR protocol and TSR protocol, and C) DF multi-relay network with multiple DF hops with BRS for PSR protocol and TSR protocol. The results have shown that the transmission distance can be improved significantly by employing DF relays with WPT. They have also shown that by increasing the number of hops in a relay the OP performance is only marginally degraded. The analytical results have been verified by Monte-Carlo simulations.

중계 공격을 예방하는 효율적인 RFID Distance-Bounding 프로토콜 (An Efficient RFID Distance-Bounding Protocol to Prevent Relay Attacks)

  • 부창희;전문석
    • 한국통신학회논문지
    • /
    • 제35권4B호
    • /
    • pp.610-619
    • /
    • 2010
  • 최근 다양한 분야에서 사용되고 있는 RFID 시스템은 악의적인 공격자로부터의 중계공격에서 취약함을 갖고있다. 따라서 Brands등은 Distance-Bounding 이라는 개념을 이용하여 증명자와 검증자 간의 인증 프로토콜을 제안하였고, 여기에 Hancke등은 RFID의 개념을 도입하였다. 그러나 RFID의 주요 기능 중 하나인 태그 아이디의 전달이 없다는 점과, Kim이 제안한 태그 아이디 전달에서의 익명성 및 리더 태그 간에 데이터 교환 단계에서 발생 가능한 에러 체크 방법에서 태그 아이디 검색의 비효율성의 단점이 있다. 따라서 본고에서는 태그의 익명성 및 위치 추적 불가능성을 만족하고, 태그의 정보 교환 단계에서 발생 가능 에러에 대한 저항성과, 태그 아이디의 검색에서 보다 효율적인 검색이 가능한 프로토콜을 제안한다.

위성통신망에서 Throughput 향상을 위한 Link Relay H-ARQ 방식 (Link Relay H-ARQ mode for Throughput improvement in a Satellite Communication network)

  • 황란미;이병진;여봉구;조주필;김경석
    • 한국인터넷방송통신학회논문지
    • /
    • 제16권1호
    • /
    • pp.121-127
    • /
    • 2016
  • 위성통신은 상공에 있는 인공위성을 통신의 중계기로 이용한 통신 방법으로 통신 범위가 광범위하고 고속 데이터를 전송할 수 있어 차세대 통신으로 각광받고 있다. 하지만 지상과 위성 간의 거리가 멀어 전파 지연 시간이 매우 길고 패킷이 손상된다는 단점이 있다. 따라서 본 연구에서는 패킷 손상을 보완하기 위하여 Link Relay H-ARQ 방식을 적용하였다. 또한, 지연 시간을 보완하는 새로운 방식인 Modified Link Relay H-ARQ 방식을 제안한다. 위성통신의 채널 구현을 위해 Markov 채널을 적용하여 성능을 분석해 본 결과, Link Relay H-ARQ 방식을 적용한 경우 BER과 PER 성능이 향상되고, Modified Link Relay H-ARQ 방식을 적용한 경우 Throughput 성능이 향상됨을 확인하였다.

Power Swing Detection Using rms Current Measurements

  • Taheri, Behrooz;Razavi, Farzad
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.1831-1840
    • /
    • 2018
  • During a power swing, distance relays may mistakenly spread fault throughout the power grid, causing a great deal of damage. In some cases, such mistakes can cause global outages. For this reason, it is critical to make a distinction between power swings and faults in distance relays. In this paper, a new method is proposed based on RMS measurement to differentiate between faults and power swings. The proposed method was tested on two standard grids, demonstrating its capability in detecting a power swing and simultaneous fault with power swing. This method required no specific configurations, and was independent of grid type and zoning type of distance relays. This feature in practice allows the relay to be installed on any grid with any kind of coordination. In protective relays, the calculations applied to the microprocessor is of great importance. Distance relays are constantly calculating the current RMS values for protection purposes. This mitigates the computations in the microprocessor to detect power swings. The proposed method was able to differentiate between a fault and a power swing. Furthermore, it managed to detect faults occurring simultaneously with power swings.

Improvement of Underlay Cooperative Cognitive Networks Bandwidth Efficiency under Interference and Power Constraints

  • Al-Mishmish, Hameed R.M.;Preveze, Barbaros;Alkhayyat, Ahmed
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권11호
    • /
    • pp.5335-5353
    • /
    • 2019
  • The definition of the bandwidth efficiency (BE) of cognitive cooperative network (CCN) is the ratio between a number of the licensed slot(s) or sub-channel(s) used by the unlicensed users to transmit a single data packet from the unlicensed transmitter to unlicensed destination, and from unlicensed relay(s) to unlicensed destination. This paper analyzes and improves the BE in the underlay CCN with a new reactive relay selection under interference and power constraints. In other words, this paper studies how unlicensed cooperative users use the licensed network slot(s) or sub-channel(s) efficiently. To this end, a reactive relay selection method named as Relay Automatic Repeat Request (RARQ) is proposed and utilized with a CCN under interference and power constraints. It is shown that the BE of CCN is higher than that of cooperative transmission (CT) due to the interference and power constraint. Furthermore, the BE of CCN is affected by the distance of the interference links which are between the unlicensed transmitter to the licensed destination and unlicensed relay to the licensed destination. In addition, the BE for multiple relays selection over a CCN under interference and power constraints is also analyzed and studied, and it is shown that the BE of CCN decreases as the number of relays increases.

철도환경에서 듀얼홉 통신시스템을 적용한 하향링크 성능 (Performance of Downlink with Dual-Hop Communication Systems in Railway Environments)

  • 조웅;김범곤;조한벽
    • 한국전자통신학회논문지
    • /
    • 제12권1호
    • /
    • pp.69-74
    • /
    • 2017
  • 중계기는 송신기에서 수신기로 신호를 전송할 때 통신반경을 확장시키고 음영지역을 제거시키는 장점 때문에 다양한 무선통신 시스템에서 적용이 가능하다. 본 논문에서는 철도환경에서 중계기를 사용하는 듀얼홉 통신시스템을 적용하여 하향링크에서의 성능을 분석한다. 통신방식은 기지국에서 중계기사이에서는 동기변조방식을 사용하고 중계기에서 수신기 사이에서는 차등변조방식을 사용하는 비대칭 전송방식을 적용한다. 시스템의 성능은 심벌오류율을 이용하며 분석하며 전체시스템이 동기방식을 이용하는 시스템과의 성능을 비교한다. 중계기 거리 및 에너지할당에 따른 성능 또한 분석한다.

전투 네트워크를 위한 MSAP NAT Relay Cell (MSAP NAT Relay Cell for Combat Networks)

  • 최기운;최영준
    • 한국통신학회논문지
    • /
    • 제37권2C호
    • /
    • pp.196-205
    • /
    • 2012
  • 본 논문에서는 NCW의 기반이 될 차기 군 통신망인 TICN체계의 MSAP-TMFT에 대해 연구하였다. MSAP-TMFT는 와이브로 기술에 기반을 두고 있는데 전투 환경을 고려하여 relay의 기능과 더불어 기지국의 자원관리 기능이 포함된 독립적 네트워크를 구성할 수 있는 NRC라고 하는 장비의 도입을 제안한다. NRC는 시스템에서 필요한 전송거리 연장, 전송 속도 증가, 부족한 무선자원의 효율적 관리, 전투 통신망의 생존성을 보장할 수 있다. 이런 고려 요소를 포함한 모의실험을 통해 기존의 시스템에서 전투원으로 제공되는 무선 자원이 보다 효과적으로 관리되고 시스템이 지원하는 수율도 증가함을 보일 수 있었다.

Performance Analysis of Coded Cooperation based Relayed Transmission under Rayleigh Fading Channels

  • Asaduzzaman;Kong, Hyung-Yun
    • 한국통신학회논문지
    • /
    • 제36권4A호
    • /
    • pp.345-355
    • /
    • 2011
  • This paper introduces the coded cooperation protocol in wireless relay network. We propose a two relay based coded cooperation protocol with RCPC codes for wireless networks. The proposed two-relay based system can achieve a diversity of order 4 under slow fading environment. Under fast fading, the diversity order is 2 times of the free distance of the convolutional code. We develop upper bounds on BER and FER for the system under both slow and fast fading with Rayleigh distribution. The effect of various channel conditions on the cooperation is also examined in this work.