• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1128-1134
• /
• 2007

Recently, sensor network technology is a highly concerned area due to the expectation of many applications in various fields. The application of sensor network technology to the marine and ocean surveillance and investigation makes the marine environmental research easier since intelligent sensor nodes substitute the human labor work. In ocean sensor network, the localization scheme for the sensor nodes is most essential because all the information without from sensor nodes might be useless unless the positional information of each sensor nodes is provided. In this paper, the localization scheme with mobile beacons in ocean sensor networks is suggested and showed it could be effective for applying to marine circumstances. Even though the previous localization scheme(Ssu's) has advantages that additional hardware is not required for obtaining the information of distance and angle and shows the high accuracy of location and energy efficiency and easy expandability as well, it has also demerits the location error increases as the minimum distance between the absolute positional information become closer. In our works, the improved localization scheme with the presumed area of sensor node using geometric constraints is suggested.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• Journal of Intelligence and Information Systems
• /
• v.19 no.1
• /
• pp.111-123
• /
• 2013

Semantic similarity/relatedness measure between two concepts plays an important role in research on system integration and database integration. Moreover, current research on keyword recommendation or tag clustering strongly depends on this kind of semantic measure. For this reason, many researchers in various fields including computer science and computational linguistics have tried to improve methods to calculating semantic similarity/relatedness measure. This study of similarity between concepts is meant to discover how a computational process can model the action of a human to determine the relationship between two concepts. Most research on calculating semantic similarity usually uses ready-made reference knowledge such as semantic network and dictionary to measure concept similarity. The topological method is used to calculated relatedness or similarity between concepts based on various forms of a semantic network including a hierarchical taxonomy. This approach assumes that the semantic network reflects the human knowledge well. The nodes in a network represent concepts, and way to measure the conceptual similarity between two nodes are also regarded as ways to determine the conceptual similarity of two words(i.e,. two nodes in a network). Topological method can be categorized as node-based or edge-based, which are also called the information content approach and the conceptual distance approach, respectively. The node-based approach is used to calculate similarity between concepts based on how much information the two concepts share in terms of a semantic network or taxonomy while edge-based approach estimates the distance between the nodes that correspond to the concepts being compared. Both of two approaches have assumed that the semantic network is static. That means topological approach has not considered the change of semantic relation between concepts in semantic network. However, as information communication technologies make advantage in sharing knowledge among people, semantic relation between concepts in semantic network may change. To explain the change in semantic relation, we adopt the cognitive semantics. The basic assumption of cognitive semantics is that humans judge the semantic relation based on their cognition and understanding of concepts. This cognition and understanding is called 'World Knowledge.' World knowledge can be categorized as personal knowledge and cultural knowledge. Personal knowledge means the knowledge from personal experience. Everyone can have different Personal Knowledge of same concept. Cultural Knowledge is the knowledge shared by people who are living in the same culture or using the same language. People in the same culture have common understanding of specific concepts. Cultural knowledge can be the starting point of discussion about the change of semantic relation. If the culture shared by people changes for some reasons, the human's cultural knowledge may also change. Today's society and culture are changing at a past face, and the change of cultural knowledge is not negligible issues in the research on semantic relationship between concepts. In this paper, we propose the future directions of research on semantic similarity. In other words, we discuss that how the research on semantic similarity can reflect the change of semantic relation caused by the change of cultural knowledge. We suggest three direction of future research on semantic similarity. First, the research should include the versioning and update methodology for semantic network. Second, semantic network which is dynamically generated can be used for the calculation of semantic similarity between concepts. If the researcher can develop the methodology to extract the semantic network from given knowledge base in real time, this approach can solve many problems related to the change of semantic relation. Third, the statistical approach based on corpus analysis can be an alternative for the method using semantic network. We believe that these proposed research direction can be the milestone of the research on semantic relation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12B
• /
• pp.1066-1080
• /
• 2003

In this paper a scalable QoS routing scheme for distributed multimedia applications in a hierarchical wide area network is proposed. The problem of QoS routing is formulated as a multicriteria shortest path problem, known as NP-complete. The proposed hierarchical routing scheme consists of two phases. In Phase 1, every border node periodically pre-computes the QoS distance for the paths between every pair of border nodes in any level of domain hierarchy. This phase is independet of the QoS request from an application. In Phase II, distributed graph construction algorithm is performed to model the network as a graph by retrieving pre-computed QoS distances. The graph is constructed by the on-demand algorithm and contains a part of the network topology which is completely neglected or partially considered by existing routing schemes, thus maintaining more accurate topology information. By using retrieval approach rather than advertising one, no global QoS state information exchange among nodes is needed. In this Phase, distributed partition algorithm for QoS routing problem is also performed, thus eliminating virtual links on the hierarchically complete path.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.3
• /
• pp.459-475
• /
• 2008

This study analyzes the network structure of the Metropolitan Seoul subway system by applying complex network analysis methods. For the purpose, we construct the Metropolitan Seoul subway system as a network graph, and then calculate various indices introduced in complex network analysis. Structural characteristics of Metropolitan Seoul subway network are discussed by these indices. In particular, this study determines the shortest paths between nodes based on the weighted distance (physical and time distance) as well as topological network distance, since urban travel movements are more sensitive for them. We introduce an accessibility measurement based on the shortest distance both in terms of physical distance and network distance, and then compare the spatial structure between two. Accessibility levels of the system have been getting up overall, and thus the accessibility gaps have been getting lessen between center located subway stops and remote ones during the last 10 years. Passenger traffic volumes are explored from real passenger transaction databases by utilizing data mining techniques, and mapped by GIS. Clear differences reveal between the spatial patterns of real passenger flows and accessibility. That is, passenger flows of the Metropolitan Seoul subway system are related with population distribution and land use around subway stops as well as the accessibility supported by the subway network.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.219-225
• /
• 1998

This study was carried out to determine the optimum nodes of pinching and fruit setting in muskmelon cultured by deep flow technique. A fruit was set either at 7~8th, 11~12th, or 15~16th nodes, and main shoot was pinched either at 22nd or 27th node. Distance between rows was set the same at 100cm, while the distance between plant in the row was set at 25, 35, 45, or 55cm. In treatments with the same node of fruit setting, fruit quality was enhanced and mean fruit weight increased on 22nd node compared to 27th node. terms of fruit quality as affected by node of fruit setting, larger fruits with lower soluble solid concentrations were produced as fruits were set at higher nodes. In terms of planting density, larger fruits with higher concentrations of soluble solid were produced in the 100cm$\times$45cm and 100cm$\times$55cm treatments compared to 100cm$\times$25cm or 100cm$\times$35cm treatment. Total fruit yields decreased as the planting density decreased. However, percent marketable fruits produced was the greatest in the 100cm$\times$45cm treatment, followed in descending order 100cm$\times$25cm, 100cm$\times$35cm, and 100cm$\times$55cm treatments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1941-1946
• /
• 2009

Wireless sensor networks do the monitoring and collecting information in the environment instead of human. Sensor networks are consisted of small sensor nodes with very limited hardware resource and very low network bandwidth. The wireless communication environment causes lots of communication errors so that the sensor network requires error correction technique to increase the reliability of network. The performance of error correction technique could be increased by the researches about the error pattern of CRC. In the paper, we did the performance evaluation - transmission interval, distance between sensor nodes, racket size, and RF power - that affects to the success ratio of data transmission in the indoor environment. we propose the performance metrics of system configuration based on the analysis of performance evaluation.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.92-102
• /
• 2017

In this paper, we consider a typical health care system via the help of Wireless Sensor Network (WSN) for wireless patient tracking. The wireless patient tracking module of this system performs localization out of samples of Received Signal Strength (RSS) variations and tracking through a Particle Filter (PF) for WSN assisted by multiple transmit-power information. We propose a modified PF, Kullback-Leibler Distance (KLD)-resampling PF, to ameliorate the effect of RSS variations by generating a sample set near the high-likelihood region for improving the wireless patient tracking. The key idea of this method is to approximate a discrete distribution with an upper bound error on the KLD for reducing both location error and the number of particles used. To determine this bound error, an optimal algorithm is proposed based on the maximum gap error between the proposal and Sampling Important Resampling (SIR) algorithms. By setting up these values, a number of simulations using the health care system's data sets which contains the real RSSI measurements to evaluate the location error in term of various power levels and density nodes for all methods. Finally, we point out the effect of different power levels vs. different density nodes for the wireless patient tracking.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.229-234
• /
• 2014

As association between sensor networks that collect environmental information by using numberous sensor nodes and smartphones that are equipped with various sensors, many applications understanding users' context have been developed to interact users and their environments. Collected data should be stored with XML formatted metadata containing semantic information to share the collected data. In case of distance based clustering schemes, the efficiency of data collection decreases because metadata files are extended and changed as the purpose of each system developer. In this paper, we proposed a clustering scheme considering the structural similarity of metadata to reduce clustering construction time and improve the similarity of metadata among member nodes in a cluster.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.159-169
• /
• 2009

In this paper, optimum design of distributed detection is considered for a parallel sensor network system consisting of a fusion center and two passive sonar nodes. AND rule and OR rule are employed as the fusion rules of the sensor network. For the fusion rules, it is shown that a threshold rule of each sensor node has uniformly most powerful properties. Optimum threshold for each sensor is investigated that maximizes the probability of detection under the constraint of a specified probability of false alarm. It is also investigated through numerical experiments how signal strength, false alarm probability, and the distance between two sensor nodes affect the system detection performances.