• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.19-27
• /
• 2000

In order to predict the propagation of road traffic noise over level terrain, this paper presents the model of the simple monopole and dipole source. Excess attenuations by ground acoustic impedance with continuity are investigated by outdoor experiments. In this results, the propagation of road traffic noise is affected by the acoustic impedance properties of the ground surface over which the noise travels, particularly when the receiver position is close to the surface. These results are then used to derive sound pressure level contours for the attenuation with distance of the equivalent energy level received from passing vehicle. The percentage of deep sleep and the number of wakings are studied for continuous traffic noise. The hearing loss and sensitivity threshold shift is investigated by changing the various parameters such as the effects of aging and noise exposure. Evaluation of the response of human to traffic noise is discribed. It is shown that exposure to excessive noise can cause temporary loss of hearing that may become permanent if the exposure is prolonged or intense.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.367-373
• /
• 2011

Guided waves inspection techniques that are different with inspection technique by bulk waves are widely used in pipe line evaluation due to advantages of long distance inspection. However, most of pipe lines at industrial fields are buried and/or coated. In this case, due to the attenuation effect from soil and/or coating material, there are a lot of difficulty on inspection by conventional ultrasonic technique. In this paper, guided waves propagating patterns are calculated with respect to excitation mode by Normal Mode Expansion(NME). Guided waves patterns based on excited by single transducer and guided wave focusing technique have employed to analyze focusing pattern on a pipe. A longitudinal mode and high order flexural modes are used with various number of transducers to determine sensitivity. Guided waves energy excited by multi transducer with focusing algorithm was successfully focused at a desired point.

• Journal of the Korean earth science society
• /
• v.32 no.1
• /
• pp.152-157
• /
• 2011

Lg amplitude decrease $Q^{-1}$ becomes very important when harzadous earthquakes occurred in neighbor nations such as Japan and China because the Lg phase is the largest seismic phase in Korea. The values of Lg $Q^{-1}$ are correlated with seismic activities from the RTSM for IRIS data with long pair distance of stations and events. The Japanese paths crossing the East Sea (Sea of Japan) show high $Q^{-1}$ values related with seismicity and oceanic crust. The paths of Shanghai having the moderate seismicity show the second highest values followed by the Japanese region, while the paths between Manchuria and the Korean Peninsula exhibit low values associated with the low seismicity of the regions.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.395-402
• /
• 2002

In the conventional public switched telephone network(PSTN), there are various types of modulation that can be used in ADSL to offer fast data communication, two of which are CAP(Carrierless Amplitude Phase) and DMT(Discrete MultiTone). As we consider the current situation, DMT is getting more predominant in the market than CAP. One of the reasons is that it gives high performance in spite of its high complexity Since DMT divides the full range of bandwidth into 256 sub-channels, it can be highly adaptive in the circumstances, where the problems of attenuation and noise caused by the propagation distance are very crucial. In this paper, a new bit loading algorithm for DMT modulation is proposed. The proposed algorithm can be efficiently implemented in a way that it requires less computation than the conventional modulation techniques. In contrast to the conventional algorithms which perform sorting processing, the proposed algorithm uses look-up tables to reduce the repetition of calculation. Consequently, it is shown that less processing time and lower complexity can be achieved.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.133-142
• /
• 2006

This paper suggests an efficient method of protection ratio(PR) calculation and shows some results of point-to-point radio relay system for frequency coordination. The proposed PR can be expressed as a function of C/N of modulation scheme, noise-to-interference ratio(N/I), multiple interference allowance, fade margins of multi-Path and rain attenuation and net filter discrimination. And PR calculation is performed in view of fade margin, modulation scheme, distance, and interference for actual point-to-point radio relay frequency. According to results for 6.2 GHz, 64-QAM and 60 km at BER 10-6, fade margin and co-channel Protection ratio reveal 41.1dB and 74.9 dB, respectively The merit of presented method provides a systematic and easy calculation by means of PR correction factor related with various parameters and can apply the same concept to frequency coordination of millimeter wave radio relay system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1643-1654
• /
• 2015

With standardization of IEEE 802.11n, APs with the 2.4GHz and 5GHz dual-band capability have widely been deployed over a metropolitan area by individuals and internet service providers. Moreover, due to the increasing attentions on indoor-localization technique using Wi-Fi, the need for LOS and NLOS determination scheme is increasing to enhance accuracy of the localization. In this paper, we propose a novel LOS/NLOS determination technique by using different radio attenuation characteristics in different frequency bands and different mediums. Based on this technique, we designed a LOS/NLOS-aware indoor localization scheme. The proposed LOS/NLOS determination algorithm can be used when the distance between an user device and an AP is unknown, and the proposed localization scheme provides very accurate room-level position information. We validated the proposed scheme by implementing it on Android smart phones.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.13-23
• /
• 1998

An intensity of the 1997 Kyungju earthquake(M=4.3) was estimated at three hundred locations based on the field survey and questionaires from 2200 residents. The isoseismal shows almost circular pattern which doesnot reflect some specific geological trends. However,most of the Kyeongsang basin except the southwestern part is included within the area of MM intensity V. There occurred strong shaking, numerous cracks on the wall of the houses, and movement of slate on the roofs, falling of the tiles from the monument. The isoseismal of the highest MM intensity VII, 1-3 km in width and 9 km in length, is elongated along the Yangsan fault, which is located about 1.5 km west from epicenter. The lineaments near the epicenter exhibit almost N-S and NNE directions. The lineament distribution, the pattern of damage area and the solution of fault plane suggest that the Kyongju earthquake occurred with strike-slip sense along the Yangsan fault. The calculated intensity attenuation(I) with distance(R) is as follows : $I{\;}={\;}I_o{\;}+{\;}0.3461{\;}-{\;}0.3274{\;}{\times}{\;}1nR{\;}-{\;}0.086{\;}{\times}{\;}R$.

• Radiation Oncology Journal
• /
• v.38 no.1
• /
• pp.52-59
• /
• 2020

Purpose: To evaluate and compare the feasibilities of magnetic resonance (MR) image-based planning using synthetic computed tomography (sCT) versus CT (pCT)-based planning in helical tomotherapy for prostate cancer. Materials and Methods: A retrospective evaluation was performed in 16 patients with prostate cancer who had been treated with helical tomotherapy. MR images were acquired using a dedicated therapy sequence; sCT images were generated using magnetic resonance for calculating attenuation (MRCAT). The three-dimensional dose distribution according to sCT was recalculated using a previously optimized plan and was compared with the doses calculated using pCT. Results: The mean planning target volume doses calculated by sCT and pCT differed by 0.65% ± 1.11% (p = 0.03). Three-dimensional gamma analysis at a 2%/2 mm dose difference/distance to agreement yielded a pass rate of 0.976 (range, 0.658 to 0.986). Conclusion: The dose distribution results obtained using tomotherapy from MR-only simulations were in good agreement with the dose distribution results from simulation CT, with mean dose differences of less than 1% for target volume and normal organs in patients with prostate cancer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.551-560
• /
• 2011

Recently, There has been increasing concern about WLAN-based indoor positioning system. Most of the existing WLAN-based positioning systems use a fingerprinting method as a main approach. In the fingerprinting approach, the accuracy of the location of a mobile objects is proportional to the number of reference points. However, depending on the increasing number of reference points in the training phase, it requires more time and effort to create fingerprint database. To solve these problems, we propose the new indoor positioning algorithm that calculate the distance between a mobile objects and an AP using the information of surrounding environment WLAN based APs and applied the particle filter to the proposed algorithm in order to improve the accuracy of the estimated location in this paper. To implement this algorithm, at first environmental information database such as wall, iron door, glass door, partition etc. existing in the periphery of the AP should be established. The positioning use attenuation model and path loss model. Our experimental results with proposed algorithm are verified that the positioning accuracy was low but solved the problems with fingerprinting, compared with other positioning algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.656-659
• /
• 2017

In this paper, we propose a digital method for transmitting audio signals using LED visible light communication system. In the proposed method, we compare the method for transmitting audio signal in analog signal and the method for transmitting by digital signal. When amplifying the audio sound and transmitting the analog signal using the LED visible light communication, attenuation corresponding to the transmission distance occurs, and there is a disadvantage that it is noisy. In order to overcome this, we propose a method for transmitting digital audio signals. The proposed method has the advantage of reducing the influence of noise, but it turned out that it is affected much by the LED blinking speed. Various methods to overcome this need to be continuously studied.