• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.683-697
• /
• 2019

The reinforced concrete (RC) structures usually suffer large residual displacements under strong motions. The large residual displacements may substantially reduce the anti-seismic capacity of structures during the aftershock and increase the difficulty and cost of structural repair after an earthquake. To reduce the adverse residual displacement, several self-centering energy dissipation braces (SCEBs) have been proposed to be installed to the RC structures. To investigate the seismic responses of the RC structures with SCEBs under the earthquake excitation, an extended Bouc-Wen model with degradation and self-centering effects is developed in this study. The extended model realized by MATLAB/Simulink program is able to capture the hysteretic characteristics of the RC structures with SCEBs, such as the energy dissipation and the degradation, especially the self-centering effect. The predicted hysteretic behavior of the RC structures with SCEBs based on the extended model, which used the unscented Kalman filter (UKF) for parameter identification, is compared with the experimental results. Comparison results show that the predicted hysteretic curves can be in good agreement with the experimental results. The nonlinear dynamic analyses using the extended model are then carried out to explore the seismic performance of the RC structures with SCEBs. The analysis results demonstrate that the SCEB can effectively reduce the residual displacements of the RC structures, but slightly increase the acceleration.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.385-393
• /
• 2023

To analyze the consolidation with horizontal sand drains, the plane strain consolidation model under multi-ramp loading is established, and its corresponding analytical solution is derived by using the separation of variables method. The proposed solution is verified by the field measurement data and finite element results. Then, the effects of the loading mode and stress distribution on consolidation and dissipation of pore pressure are investigated. At the same time, the influence of hydraulic conductivity and thickness of sand blankets on soil consolidation are also analyzed. The results show that the loading mode has a significant effect on both the soil consolidation rate and generation-dissipation process of pore water pressure. In contrast, the influence of stress distribution on pore pressure dissipation is obvious, while its influence on soil consolidation rate is negligible. To guarantee the fully drained condition of the sand blanket, the ratio of hydraulic conductivity of the sand blanket to that of clay layer k_d/k_v should range from 1.0×10⁴ to 1.0×10⁶ with soil width varying from 100 m to 1000 m. A larger soil width correspondingly needs a greater value of kd/kv to make sure that the pore water can flow through the sand blanket smoothly with little resistance. When the soil width is relatively small (e.g., less than 100 m), the effect of thickness of the sand blanket on soil consolidation is insignificant. And its influence appears obvious gradually with the increase of the soil width.

• 한국해안·해양공학회논문집
• /
• 제26권1호
• /
• pp.1-8
• /
• 2014

본 연구에서는 우리나라 동해안에 설치된 해안침식대책공법 중 잠제시설에 대한 현장모니터링을 수행하고 그 효용성을 확인하고자 하였다. 해안침식대책시설은 3년의 계획과 3년의 시공으로 총 6년간에 걸쳐 완공되었으며, 계획단계에 있어서의 수치모형실험결과와 관측결과 등에 대해서는 Kim et al.(2008, 2011)에 의해 소개되어 있다. 본 연구에서는 현장관측을 통해 잠제시설 설치 이후의 해빈폭 증가 현상을 확인하였고 해빈폭이 늘어난 원인을 잠제의 기본적인 성능인 파랑제어효과에 의한 것임을 알 수 있었다. 대상해역의 파랑관측은 잠제 시설 전면과 후면 즉 내해측과 외해측에서 수행하였다. 외해의 관측지점(수심 H = 16.5m)과 내측지점(H = 3.7 m)에 메모리형 파고계를 설치하여 파고관측결과를 도출하고 잠제시설의 파랑저감효과는 제체(잠제시설)를 투과하는 파랑의 전달율(Kt)로 분석하였다. 현장관측자료를 분석한 결과, 내습하는 파랑을 저감시켜 해안침식을 방지하기 위해 설치된 잠제의 파랑저감효과는 약 60%를 나타내고 있는 것으로 확인되었다.

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.577-598
• /
• 2018

The imperfect steel-concrete interface bonding is an important deficiency of the concrete-filled double skin tubular (CFDST) columns that led to separating concrete and steel surfaces under lateral loads and triggering buckling failure of the columns. To improve this issue, it is proposed in this study to use longitudinal and transverse steel stiffeners in CFDST columns. CFDST columns with different patterns of stiffeners embedded in the interior or exterior surfaces of the inner or outer tubes were analyzed under constant axial force and reversed cyclic loading. In the finite element modeling, the confinement effects of both inner and outer tubes on the compressive strength of concrete as well as the effect of discrete crack for concrete fracture were incorporated which give a realistic prediction of the seismic behavior of CFDST columns. Lateral strength, stiffness, ductility and energy absorption are evaluated based on the hysteresis loops. The results indicated that the stiffeners had determinant role on improving pinching behavior resulting from the outer tube's local buckling and opening/closing of the major tensile crack of concrete. The lateral strength, initial stiffness and energy absorption capacity of longitudinally stiffened columns with fixed-free end condition were increased by as much as 17%, 20% and 70%, respectively. The energy dissipation was accentuated up to 107% for fixed-guided end condition. The use of transverse stiffeners at the base of columns increased energy dissipation up to 35%. Axial load ratio, hollow ratio and concrete strength affecting the initial stiffness and lateral strength, had negligible effect of the energy dissipation of the columns. It was also found that the longitudinal stiffeners and transverse stiffeners have, respectively, negative and positive effects on ductility of CFDST columns. The conclusions, drawn from this study, can in turn, lead to the suggestion of some guidelines for the design of CFDST columns.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.315-324
• /
• 2012

The purpose of current study was to investigate the effects of the heights on the lower extremities, torso and neck segments for energy dissipation during single-leg drop landing from different heights. Twenty eight young healthy male subjects(age: $23.21{\pm}1.66yr$, height: $176.03{\pm}4.22cm$, weight: $68.93{\pm}5.36kg$) were participated in this study. The subjects performed the single-leg drop landing from the various height(30, 45 & 60 cm). Force plates and motion-capture system were used to capture ground reaction force and kinematics data, respectively. The results were as follows. First, the ROM at the ankle, knee, hip and trunk was increased with the increased heights but the ROM at the neck was increased in the 60cm. Second, the angular velocity, moment and eccentric work at the ankle, knee, hip, trunk, and neck was increased with the increased heights. Third, the contribution to total work at the knee joint was not significantly different, while the ankle joint rate was decreased and hip and neck rate was increased in the 60cm, and trunk rate was increased with the increased heights. Lastly, the increase in landing height was able to augment the level of energy dissipation not only at the lower extremities but also at the trunk and neck. The findings showed that drop landing affect trunk and neck with lower extremity joints. Therefore, we need to consider that trunk and neck strengthening including stability should be added to reduce sports injury during prevention training.

• 한국환경농학회지
• /
• 제33권2호
• /
• pp.69-77
• /
• 2014

BACKGROUND: The purpose of this study was to investigate the effects of clothianidin on the soil in terms of clothianidin dissipation and degradation to evaluate its safety in order to provide an analytical foundation for clothianidin and the 5 metabolites related to it. METHODS AND RESULTS: High-performance liquid chromatography(HPLC) was used to separate clothianidin and its metabolites in this study. In soil, after suppressing dissociation-proned ions with weak alkalic $NH_4OH$ and extracting the metabolites with methanol, clothianidin, Methylaminoimidazole(MAI), Methylnitroguanidine(MNG), Thiazolylmethylurea(TZMU) and Thiazolylnitroguanidine(TZNG). Thiazolylmethylguanidine(TMG) were extracted with the addition of neutral $NH_4OAC$ to increasing the intensity of ions. Compounding elements were separated by using Hydrometrix ($ChemElut^{TM}$) and ion-exchanging Solid-phase extraction(SPE) Strong cation-exchanger(SCX) and C18 were used. The recovery rates of clothianidin and 5 metabolites in soil and water ranged from 87.4% to 104.3%. A standard deviation of our analysis for the soil and water samples were less than 5%. CONCLUSION: Well accepted detection limits for clothianidin and 5 metabolites in soil samples based on a dissipation analysis is 0.005 mg/kg and 0.001 mg/L in water samples. The dissipation concentration of this study was decided to be enough to evaluate the dissipation levels of clothianidin and its metabolites.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.187-220
• /
• 2015

Soil disturbance induced by installation of mandrel driven vertical drains decreases the in situ horizontal hydraulic conductivity of the soil in the vicinity of the drains, decelerating the consolidation rate. According to available literature, several different profiles for the hydraulic conductivity variation with the radial distance from the vertical drain, influencing the excess pore water pressure dissipation rate, have been identified. In addition, it is well known that the visco-plastic properties of the soil also influence the excess pore water pressure dissipation rate and consequently the settlement rate. In this study, a numerical solution adopting an elastic visco-plastic model with nonlinear creep function incorporated in the consolidation equations has been developed to investigate the effects of disturbed zone properties on the time dependent behaviour of soft soil deposits improved with vertical drains and preloading. The employed elastic visco-plastic model is based on the framework of the modified Cam-Clay model capturing soil creep during excess pore water pressure dissipation. Besides, nonlinear variations of creep coefficient with stress and time and permeability variations during the consolidation process are considered. The predicted results have been compared with V$\ddot{a}$sby test fill measurements. According to the results, different variations of the hydraulic conductivity profile in the disturbed zone result in varying excess pore water pressure dissipation rate and consequently varying the effective vertical stresses in the soil profile. Thus, the creep coefficient and the creep strain limit are notably influenced resulting in significant changes in the predicted settlement rate.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.364-372
• /
• 2023

The space reactor is the primary energy supply for future space vehicles and space stations. The radiator is one of the essential parts of a space reactor. Therefore, the research on radiators can improve the heat dissipation power, reduce the quality of radiators, and make the space reactor smaller. Based on MOOSE multi-physics numerical calculation platform, a simulation program for the combination of heat pipe and fin at the end of heat pipe radiator is developed. It is verified that the calculation result of this program is accurate and the calculation speed is fast. Analyze the heat transfer characteristics of the combination with heat pipe and fin, and obtain its internal temperature field. Based on the calculation results, the influence of structural parameters on the heat dissipation power is analyzed. The results show that when the fin width is 0.25 m, fin thickness is 0.002 m, condensing section length is 0.5425 m and heat pipe radius is 0.014 m, the power-mass ratio is the highest. When the temperature is 700K-900K, the heat dissipation power increases 41.12% for every 100K increase in the operating temperature. Smaller fin width and thinner fin thickness can improve the power-mass ratio and reduce the radiator quality.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1473-1476
• /
• 2019

PCB (Printed Circuit Board)를 설계할 때 정확한 재료 정보는 매우 중요하다. 전투함의 통합 마스트 (Integrated Mast)에서는 스텔스 기능을 위해 열 저감이 필수적이며 이를 위해서는 내부의 제어 장치에서 발생하는 열을 최대한 줄여야 한다. 제어 장치는 대부분 PCB로 이루어져 있으나 PCB의 유전상수 (Dk, Dielectric Constant)가 정확하게 알려져 있지 않아 임피던스 부정합이 발생하며 이는 열 발생을 매우 증가시킨다. 본 논문에서는 Dk의 측정 방법에 대해 살펴보고 동작 주파수에 따른 Dk 값의 변화가 임피던스 부정합에 미치는 영향을 살펴본다.

• Wind and Structures
• /
• 제7권2호
• /
• pp.89-106
• /
• 2004

The response of tall buildings to gust buffeting is usually evaluated assuming that the structural damping is of a viscous nature. In addition, when dampers are incorporated in the design to mitigate the response, their effect is allowed for increasing the building modal damping ratios by a quantity corresponding to the additional energy dissipation arising from the presence of the devices. Even though straightforward, this procedure has some degree of inaccuracy due to the existence of a memory effect, associated with the damping mechanism, which is neglected by a viscous model. In this paper a more realistic viscoelastic model is used to evaluate the response to gust buffeting of tall buildings provided with energy dissipation devices. Both cases of viscous and hysteretic inherent damping are considered, while for the dampers a generic viscoelastic behaviour is assumed. The Laguerre Polynomial Approximation is used to write the equations of motion and find the frequency response functions. The procedure is applied to a 25-story building to quantify the memory effects, and the inaccuracy arising when the latter is neglected.