• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.275-284
• /
• 1997

Thermodynamic behavior of a composite system which is composed of two simple thermal subsystems with constant heat capacities is analyzed, and several thermodynamic phenomena are investigated. The changes of the states and the potential work of the composite system are shown as the interaction between the subsystems in the composite system. The potential work is defined as the possible maximum available work from the composite system, and it is a thermodynamic property of the composite system. The decrease of the potential work is the same as the available work output from the composite system in reversible processes. The dissipation of available work is directly connected to the generation of entropy. The concepts of exergy and internal energy can be explained as a special case of the potential work.

• 오토저널
• /
• 제3권2호
• /
• pp.34-42
• /
• 1981

The feasibility of using fluidic components for improving certain performance characteristics of the suspension systems for tracked vehicle is investigated. This study describes three variable damping systems for which the damping coefficients are function of relative velocity and absolute a of the vehicle body. Through the comparison analysis between constant damping coefficient damper and each of variable dampers. the followings were found: (1)Fluidic Diode Damper gave less accelerations, (2)Both Fluidic Diode Damper and Relative Velocity Damper gave the less time for which the wheel is off the ground, (3) At low vehicle velocity Fluidic Diode Damper gave low energy dissipation rate, while at high vehicle velocity Turbulence Accelerometer Damper gave low energy dissipation rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1026-1029
• /
• 2008

Temperature increase during OLED operation can significantly degrade the device lifetime. By using top-emission OLEDs fabricated on glass and silicon substrates that have different thermal conductivities, we found that efficient heat dissipation and corresponding lifetime improvement can be obtained by making a direct contact between the OLED anode and the high thermally-conductive silicon substrate. We describe substrate-dependent OLED heat dissipation behavior and OLED lifetime improvement by using infrared camera images and constant current stress test methods.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.205-210
• /
• 2000

The objective of this study is to investigate the structural behavior of steel beam-high strength concrete column joints subjected to reversed cyclic loadings. The variables of the experimental study is amount of steel plates at the beam-to-column joint panel zone. Three specimens were prepared and tested under constant uniaxial load($0.2f_{ck}A_g$) to reinforced high strength concrete column, and the reversed cyclic loads were applied to end of steel beams, The failure modes, hysteresis loop, stiffness degradations and energy dissipation capacities were analyzed and compared for test variables.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.296-299
• /
• 2002

In this paper, a hexagon-type piezoelectric transformer was investigated to increase the output power. The length of its side was 14mm and 17.5mm, respectively. The piezoelectric ceramics was composed to PZT-PMN-PSN. This composition showed the characteristics which had an about 1500 of the mechanical Q-factor, 0.55 of the electromechanical coupling coefficient, $320{\times}10^{-12}C/N$ of the piezoelectric constant $d_{31}$, 0.3 % of the dissipation factor, etc. The voltage step-up ratio increased with increasing the load resistance, $R_{L}$, so it reached 80 with $R_{L}$ of $1M{\Omega}$ and was proportion to the length of side of the hexagon-type piezoelectric transformer. Also, the output power increased with increasing the size of the hexagon-type piezoelectric transformer.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.433-453
• /
• 2008

The equation of motion of a one way (vertical) spanning strip wall, as an assembly of two rigid bodies, is presented. Only one degree of freedom is needed to completely describe the wall response as the bodies are assumed to be perfectly rectangular and are allowed to rock but not to slide horizontally. Furthermore, no arching action occurs since vertical motion of the upper body is not restrained. Consequently, the equation of motion is nonlinear, with non constant coefficients and a Coriolis acceleration term. Phenomena associated with overburden to self weight ratio, motion triggering, impulsive energy dissipation, amplitude dependency of damping and period of vibration, and scale effect are discussed, contributing to a more complete understanding of experimental observations and to an estimation of system parameters based on the wall characteristics, such as intermediate hinge height and energy damping, necessary to perform nonlinear time history analyses. A comparison to a simple standing, or parapet, wall is developed in order to better highlight the characteristics of this assembly.

• 대한전기학회논문지
• /
• 제33권2호
• /
• pp.83-87
• /
• 1984

Influence of the metallization during the manufacturing of the ceramic multilayer capacitor on the dielectric properties was studied as a change of the capacity and the dissipation factor. Due to the change of the relative dielectric constant as a function of the measuring temperature the influence of the metallization could be obtained and the change of the dissipation factor as a function of the measuring frequency was anaysed. In order to investigate the boundary effect between the metallization and the dielectric a kind of microstructure model at the internal Grain and Grain Boundary was constructed and tried to analyse the change of the dielectric properties.

• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.449-472
• /
• 2016

This paper studies the seismic behavior of reinforced concrete (RC) walls with encased cold-formed and thin-walled (CFTW) steel truss, which can be used as an alternative to the conventional RC walls or steel reinforced concrete (SRC) composite walls for high-rise buildings in high seismic regions. Seven one-fourth scaled RC wall specimens with encased CFTW steel truss were designed, manufactured and tested to failure under reversed cyclic lateral load and constant axial load. The test parameters were the axial load ratio, configuration and volumetric steel ratio of encased web brace. The behaviors of the test specimens, including damage formation, failure mode, hysteretic curves, stiffness degradation, ductility and energy dissipation, were examined. Test results indicate that the encased web braces can effectively improve the ductility and energy dissipation capacity of RC walls. The steel angles are more suitable to be used as the web brace than the latticed batten plates in enhancing the ductility and energy dissipation. Higher axial load ratio is beneficial to lateral load capacity, but can result in reduced ductility and energy dissipation capacity. A volumetric ratio about 0.25% of encased web brace is believed cost-effective in ensuring satisfactory seismic performance of RC walls. The axial load ratio should not exceed the maximum level, about 0.20 for the nominal value or about 0.50 for the design value. Numerical analyses were performed to predict the backbone curves of the specimens and calculation formula from the Chinese Code for Design of Composite Structures was used to predict the maximum lateral load capacity. The comparison shows good agreement between the test and predicted results.

• 한국가스학회지
• /
• 제13권3호
• /
• pp.33-42
• /
• 2009

부상화염에 대한 연소반응 유동 수치해석을 수행하여 부상높이에 대한 기존 연구 결과들과 비교를 통하여 수치해석 결과의 신뢰성을 검정하였다. 화염전파속도를 결정하는 유동방향변환점을 기존의 연구에서처럼 연료분출속도에 상관없이 일률적인 위치로 선정할 경우 많은 오차를 유발하기 때문에 본 연구에서는 부상화염에서 이론당량비선을 따라 유동속도와 스칼라 소산율 특성을 살펴보았고 화염전파속도를 선정하는 유동방향변환점을 타당하게 선정하는 방법을 정립하였다. 이를 토대로 화염전파속도와 스칼라소산율의 관계식을 도출하여 부상화염에서 화염전파속도 특성을 규명하였다.

• Current Research on Agriculture and Life Sciences
• /
• 제31권4호
• /
• pp.272-279
• /
• 2013

사과 중 triazole계 살균제 flusilazole 및 myclobutanil의 생물학적 반감기와 출하전 잔류허용기준을 산출하기 위해 안전사용기준에 근거한 기준량과 3배량의 약제를 살포하고 그 잔류량을 조사하였다. 시험기간 중 두 농약의 잔류량은 각각의 MRL 이하로 나타났으며, 사과 중 생물학적 반감기는 flusilazole의 경우 기준량 처리구에서 6.7일, 3배량 처리구에서 6.2일로 나타났다. 반면에 myclobutanil의 반감기는 기준량 처리구에서 13.3일, 3배량 처리구에서 24.8일로 나타나 flusilazole보다 더 긴 반감기를 가지는 것으로 조사되었다. First order kinetics에 근거한 감소지수식을 이용하여 산출된 각 농약의 감소상수는 flusilazole에 대하여 0.0513, myclobutanil에 대하여 0.0244이었으며, 산출된 감소상수들을 이용하여 출하 전 잔류허용기준(PHRL)을 계산한 결과, 안전사용기준을 준수한 농약살포를 가정하였을 때 flusilazole은 수확 일주일 전 0.43 mg/kg, myclobutanil은 같은 시기 0.59 mg/kg 이하로 잔류하면 수확 시 잔류농도가 MRL 이하로 잔류할 것으로 예측된다.