• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.91-102
• /
• 2015

Analytical solutions for the forced convection heat transfer of viscoelastic fluids obeying the Giesekus model are obtained in a concentric annulus under laminar flow for both thermal and hydrodynamic fully developed conditions. Boundary conditions are assumed to be (a) constant fluxes at the walls and (b) constant temperature at the walls. Temperature profiles and Nusselt numbers are derived from dimensionless energy equation. Subsequently, effects of elasticity, mobility parameter and viscous dissipation are discussed. Results show that by increasing elasticity, Nusselt number increases. However, this trend is reversed for constant wall temperature when viscous dissipation is weak. By increasing viscous dissipation, the Nusselt number decreases for the constant flux and increases for the constant wall temperature. For the wall cooling case, when the viscous dissipation exceeds a critical value, the generated heat overcomes the heat which is removed at the walls, and fluid heats up longitudinally.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.1-6
• /
• 2003

Wave energy dissipation and energy transfer between wave components, during the directional wave breakings, are investigated. Directional incipient and plunging breakers were generated by focusing the multi-frequency and multi-directional wave components at a designed location, based on a constant wave amplitude and a constant wave steepness frequency spectrum. The time series of surface wave elevation was measured at 9 different locations around the wave focusing point, using a wave gauge array. In order to examine the variation of the directional spreading function, the horizontal velocity of fluid motion was also measured. By comparing energy spectrums, before and after the breaking, the characteristics of energy dissipation and energy transfer, caused by wave breaking, are investigated. Their dependencies on directionality, as well as frequency, are analyzed. The breakings significantly dissipate wave energy, through energy transfer, in the upper region of the peak-frequency band, while enhancing wave energy in the low-frequency band.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.472-477
• /
• 2000

Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1047-1052
• /
• 2010

이 연구에서는 진동타입기에 의해 시공되는 강널말뚝의 횡방향진동모델에 대해 횡방향스프링상수를 달리하여 횡방향진동에 따른 에너지손실 및 하중감소계수에 미치는 영향을 살펴보았다. 강널말뚝의 자유길이에 따른 에너지손실과 하중감소계수는 계산에서 고려한 횡방향스프링상수의 크기에 관계없이 강널말뚝의 휨강성보다는 편심거리의 크기에 영향을 크게 받는 것으로 나타났다. 그리고 계산에서 고려한 횡방향 스프링상수값, 10000N/m 이상일 경우 말뚝의 자유길이에 따른 하중감소계수가 수렴함을 알 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.11-19
• /
• 2001

An adaptive nonlinear artificial dissipation model is presented for performing aeroacoustic computations by the high-order and high-resolution numerical schemes based on the central finite differences. An effective formalism of it is devised by combining a selective background smoothing term and a well-established nonlinear shock-capturing term which is for the temporal accuracy as well as the numerical stability. A conservative form of the selective background smoothing term is presented to keep accurate phase speeds of the propagating nonlinear waves. The nonlinear shock-capturing term that has been modeled by the second-order derivative term is combined with it to improve the resolution of discontinuities and stabilize the strong nonlinear waves. It is shown that the improved artificial dissipation model with an adaptive control constant which is independent of problem types reproduces the correct profiles and speeds of nonlinear waves, suppresses numerical oscillations near discontinuity and avoids unnecessary damping on the smooth linear acoustic waves. The feasibility and performance of the adaptive nonlinear artificial dissipation model are investigated by the applications to actual computational aeroacoustics problems.

• 한국환경농학회지
• /
• 제36권3호
• /
• pp.184-192
• /
• 2017

BACKGROUND: This study was performed to evaluate the residue dissipation of boscalid and spinetoram on crown daisy and sweet pepper affected by the morphology of the crop. The half-lives and dissipation rate constants for boscalid and spinetoram on crown daisy and sweet pepper were calculated. And then lower limit of 95% confidence interval for dissipation rate constant could be used to propose the pre-harvest residue limit. METHODS AND RESULTS: The pesticide products diluted according to the pesticide label were applied one time on crown daisy and sweet pepper at 2 field sites, respectively. Initial concentration of boscalid and spinetoram on crown daisy after application were in the range of 72.80~117.15 mg/kg and 2.82~4.67 mg/kg, respectively. And Initial concentration of boscalid and spinetoram on sweet pepper were in the range of 1.58~1.62 mg/kg and 0.10~0.21 mg/kg, respectively. Boscalid and spinetoram for crown daisy dissipted below the maximum residue limit(MRL) at 10 and 2 days after application, respectively. All residues concentration of boscalid and spinetoram for sweet pepper below the MRL at 0 day after application. The half-lives based on dissipation rate constant for boscalid and spinetoram on crown daisy were 4.2~4.9 days and 3.0~2.4 days respectively. And the half-lives for boscalid and spinetoram on sweet pepper were 6.7~7.0 days and 2.8~4.0 days respectively. CONCLUSION: The difference in initial concentration of boscalid and spinetoram among crop commodities were due to different crop morphology with larger surface areas. This study was suggested that pre-harvest residue limit would be calculated from lower limit of 95% confidence interval for dissipation rate constant and would be useful to protect consumers by controlling the pesticide residues in crop.

• Journal of Applied Biological Chemistry
• /
• 제63권3호
• /
• pp.267-274
• /
• 2020

상추 중 살균제 mandipropamid 및 살충제 thiamethoxam의 생산단계 잔류허용기준(PHRLs)를 추정하기 위해 3곳의 상추 시설재배지에서 두 약제의 경시적 잔류량 감소특성을 조사하였다. 상추 중 농약 잔류량은 HPLC-PDA 또는 UVD를 이용하여 분석하였으며 우수한 회수율 및 변이값을 보여 분석의 유효성을 확보하였다. 농약안전사용기준에 따라 약제살포 권고량을 살포한 후 살포 후 수확일(PHI)을 포함한 10일 동안 출하시기에 적합한 개체를 채취하여 잔류량을 분석하였다. 포장별 초기 평균 잔류량은 mandipropamid 6.68-17.87 mg/kg, thiamethoxam 4.96-8.31 mg/kg이었고 10일 경과 후 각각 초기잔류량의 16-54 및 14-44% 수준으로 감소하였다. Thiamethoxam의 대사산물인 clothianidin은 <0.02-0.37 mg/kg으로 검출되었다. 상추 중 두 약제의 잔류량은 단순 1차 감쇄반응처럼 감소하였으며 포장구분없이 일자별 잔류량 회귀식을 산출한 결과, 평균 감소상수 및 생물학적 반감기는 mandipropamid의 경우 -0.1060 및 6.5일이었고 thiamethoxam은 -0.1236 및 5.6일이었다. 상추 잔류량 감소상수의 95% 신뢰구간 상한치는 mandipropamid -0.0746 및 thiamethoxam -0.1091이었으며, 출하 10일 및 5일 전 PHRLs은 mandipropamid의 경우 63.24 및 43.56 mg/kg, thiamethoxam은 44.66 및 25.88 mg/kg으로 산출되었다. 본 연구결과는 농가에서 농작물 출하시기를 조절하는데 활용될 수 있으며 농가의 소득 안정화에 기여할 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.137-142
• /
• 2000

The sintering and electrical properties of YMnO3 bulk ceramics were investigated with Y/Mn ratios(Mn rich ;0.80/1.20, 0.90/1.10, 0.95/1.05, and Y rich ; 1.00/1.00, 1.05/0.95, 1.10/0.90). The crystal structure of samples showed a hexagonal structure, and the sample of Y/Mn = 0.95/1.05 indicated higher c-axis oriented peak than other samples. In the case of Mn rich samples, the grain sizes were about 7.8${\mu}{\textrm}{m}$ and they showed 95% of theoretical density. Whereas, in the case of Y rich samples, the grain sizes were about 2.3${\mu}{\textrm}{m}$ and they showed 86%. The dielectric constant and dissipation factor of the Mn rich samples were smaller than those of the Y rich samples. The samples of Y/Mn = 0.90/1.10 showed the lowest a dissipation factor, and their dielectric constant, dissipation factor and Curie temperature were 36, 0.0136 and 68$0^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.7-10
• /
• 2004

This paper presents the electrical properties of PTFE nozzle for a electrical apparatus. In the arcing environment in a electrical apparatus, radiation is considered to be the major energy transport mechanism from the arc to the wall. The fraction of the radiation power is emitted out of the arc and reaches the nozzle wall, causing ablation at the surface and in the depth of the wall. The energy concentration in the material leads to the depolymerization and eventually leads to the generation of decomposed gas as well as some isolated carbon particles. Adding some fillers into PTFE is expected to be efficient for improving the endurability against radiation. In this experiment, three kinds of fillers that have endurance in the high temperature environment were added into PTFE. Light reflectance of fillers was investigated. Dielectric constan and dissipation factor of PTFE composites were investigated. Dielectric constant and dissipation factor of the PTFE composites increased with increasing contents of the fillers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.341-344
• /
• 1989

A Modified equivalent circuit by combining a series and parallel of polymer matrix for estimating the dielectric constant ${\bar{K}}_{33}$ values changing the volume percent of $PbTiO_3$, the dependences of frequency for the 713 and dissipation factor for 0 - 3 composites was derived. The difference of the dielectric constant and dissipation factor between the calculated and measured values became smaller at higher volume percent of $PbTiO_3$. There was, good agreement between the calculated and observed results for 70 volume percent of $PbTiO_3$ and 30 volume percent of Eccogel composite at 1(KHz), 25($^{\circ}C$). The optimized variable x was 0.94 in $PbTiO_3$ ceramics. $PbTiO_3$ powder and Eccogel polymer were used as piezoelectric fillers and matrix, respectively.