• Journal of Information Display
• /
• v.4 no.4
• /
• pp.19-24
• /
• 2003

By using vacuum in-line driving and photoluminescence measuring system, we have examined the electrical and optical characteristics of plasma display panel produced by vacuum in-line sealing technology. In addition, the relationship between luminous efficiency and base vacuum level before filling discharge gas was analyzed. In the case of base vacuum level of $1.33{\times}10^{-1}$ Pa, the firing voltage of a 2-inch diagonal PDP panel was ranged from 312 to 343 V depending on the discharge gas pressure of $2.667{\times}10^4$ to $4{\times}10^4$ Pa at room temperature, Whereas in the case of $1.33{\times}10^{-4}$ Pa, the firing voltage was reduced by 40 V and luminescence was improved slightly.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.32-34
• /
• 2000

A new PDP cell structure called CSP(Charge Storage Pad) improves the luminous efficiency by 1.6 times and prevents cross talk between adjacent cells. The CSP, which is a conducting material, is inserted between the dielectric layer and the MgO film in the front plate. This CSP produces a longer time-averaged discharge path to get a high luminous efficiency and confines the discharge to prevent cross talk.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.810-813
• /
• 2003

Application of inorganic silica-neodymia alloy films grown by sputtering technology to the dielectric layer of plasma display panel (PDP) is presented. The experimental results reveal that dielectric constant of the alloy films increases with neodymia concentration. Also, the alloy films act as band rejection color filter owing to sharp absorptions originating in the intratransition within the 4f shell of the $Nd^{3+}$ ion. In the optical band pass region, the transmittances of the alloy films show higher than those of commercial glass-like dielectrics. As a result, the luminance of PDP device with the alloy dielectric layer is higher than that of device with conventional dielectrics, indicating wider color gamut and higher color purity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.764-767
• /
• 2003

We have experimentally investigated the influence of wall charge configurations prior to addressing discharge on dynamic margin in AC plasma display panel. In this experiment, we have analyzed the quantity and polarity of wall charge accumulated on the front and rear dielectrics just prior to the addressing discharge under the conventional driving sequence.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.710-713
• /
• 2003

The wall charge is major factor to determine the discharge characteristics. The minimum sustain voltage related to the wall charge decay were investigated as a function of aging time in AC plasma display panel. For the long time scale, the wall charge decay time is dependent on the aging time. The inverse time scale of the wall charge decay has the maximum value at around 3 hours aging time and then fell down.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.83-86
• /
• 2002

This paper presents a new self-erasing discharge mode for the improvement of luminous efficiency and color purity of an AC plasma display panel (AC PDP). A new self-erasing discharge mode is produced between successive sustain pulses. by simultaneously applying the auxiliary short pulses at the falling edge of the sustain pulses without cross-talk during a sustain period. As a result. the luminous efficiency and color gamut are improved by 16% and 5%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.325-328
• /
• 2002

We developed a high performance 2.2" active matrix OLED display for IMT-2000 mobile phone. Scan and Data driver circuits were integrated on the glass substrate, using low temperature poly-Si(LTPS) TFT CMOS technology. High efficiency EL materials were employed to the panel for low power consumption. Peak luminescence of the panel was higher than 250cd/$m^2$ with power consumption of 200mW.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.167-170
• /
• 2005

The mechanism of striation in the coplanar- and matrix-type plasma display panel (PDP) cells has been studied using the particle-in-cell Monte-Carlo Collision (PIC-MCC) model. The striation formation is related to the ionization energy of neutral atoms and the well-like deformation of space potential by space charge distribution. Negative wall charge accumulation by electrons on the MgO surface of the anode region is also one of the key factors for the formation of striation. The clearness of the striation phenomenon in PIC-MCC code in comparison with fluid code can be explained by using nonlocal electron kinetic effect.

• Journal of Information Display
• /
• v.5 no.4
• /
• pp.7-11
• /
• 2004

Effects of base vacuum level on the electrical and optical characteristics of the plasma display panel (PDP) were investigated. The relationship between efficiency and base vacuum level before filling discharge gas was analyzed. For the base vacuum level of $1{\times}10^{-4}$ torr, firing voltage of a 2-inch diagonal PDP panel was 232 V at the discharge gas pressure of 400 torr and luminous efficiency was 1.5 lm/W at 180V sustaining pulse. On the other hand for $1{\times}10^{-6}$torr, the firing voltage was reduced to 215 V and luminous efficiency was improved considerably to 2.5 lm/W. We successfully demonstrated the smooth operation of tip-less PDP fabricated using vacuum in-line sealing method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.109-114
• /
• 2015

We realize a color reflective display without any color filter and sub-pixelation concept, by which the full or single color realization is basically impossible. In this study, we use a 3-electrode on the lower substrate with indium tin oxide (ITO) glass. The width of a rib is $30{\mu}m$, a cell size is $150{\mu}m{\times}150{\mu}m$, and the space of lower electrodes is $10{\mu}m$. To get the single color, we drive this panel by a identical algorithm based on the movement of charged particle in color fluid within a cell with hermetic seal. According to the driving method, the lifetime of panel is different.