• 제목/요약/키워드: display packaging

검색결과 155건 처리시간 0.018초

백색 LED 제조를 위한 정전기력과 보이스코일모터를 이용한 디스펜서 시스템 개발 (Development of Dispenser System with Electrohydrodynamic and Voice Coil Motor for White Light Emitting Diode)

  • 강동성;김기범;하석재;조명우;이정우
    • 한국산학기술학회논문지
    • /
    • 제16권10호
    • /
    • pp.6925-6931
    • /
    • 2015
  • LED(Light Emitting Diode)는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적 특성으로 인해 조명, 디스플레이 등 여러 분야에 사용되고 있다. 백색광 발광다이오드 구현 방식에는 대표적으로 청색 LED 칩과 황색 형광체를 조합하여 백색광을 방출하는 유형이 사용 편리성, 경제성, 효율성 측면에서 LED 백라이트 유닛 및 LED 조명 제조에 가장 적합한 것으로 연구되어 실제 적용되고 있다. 백색광 구현 LED 칩 패키징 공정에서 청색 LED 칩에 황색 형광체에 실리콘을 혼합한 형광봉 지재를 토출하는 공정은 중요한 공정이다. 따라서 본 연구에서는 조명용 백색 LED 제조 공정에서 실리콘 봉지재를 토출하기 위하여 정전기력 방식과 보이스코일 모터를 이용하여 EHD 펌프 시스템을 개발하였다. 이를 위하여 인가전압 및 시간에 따른 유체곡면 형상을 확인하기 위하여 기초 토출 실험을 통해 최적의 토출 조건이 결정하였고 또한 검증을 위하여 실험계획법을 사용하였다. 검증된 토출 조건의 균일도를 확인하기 위하여 반복 토출 실험을 수행하였다.

개환 복분해 중합을 통한 가교형 폴리이미드 박막의 잔류응력 거동 및 특성 분석 (Residual Stress Behavior and Characterization of Polyimide Crosslinked Networks via Ring-opening Metathesis Polymerization)

  • 남기호;서종철;장원봉;한학수
    • 폴리머
    • /
    • 제38권6호
    • /
    • pp.752-759
    • /
    • 2014
  • 본 연구에서는 미세 전자 소자용 절연박막 및 차세대 플렉시블 디스플레이 기판으로서 사용이 기대되는 폴리이미드(PI)에 개환 복분해 중합(ring-opening metathesis polymerization)이 가능한 환형 말단 캡핑제(end-capping agent)인 cis-1,2,3,6-tetrahydrophthalic anhydride(CDBA)로 사슬 말단에 가교 반응이 된 가교형 폴리이미드를 합성하였다. 말단 캡핑제의 조성비에 따른 가교형 폴리이미드 박막의 잔류응력 거동은 thin film stress analyzer(TFSA)를 이용한 wafer bending mothod로 온도에 따라 연속적인 거동을 in-situ로 측정하였다. 열특성은 시차 주사 열량계(DSC), 열기계 분석기(TMA) 및 열 중량 분석기(TGA)를 이용하여 측정하였고, 광학 특성은 자외선/가시광선 분광광도계(UV-vis)와 색차계(spectrophotometer)를 이용하였으며, 네트워크 구조의 모폴로지(morphology) 변화를 통해 해석하였다. 말단 캡핑제의 조성비가 증가함에 따라 잔류응력은 27.9에서 -1.3 MPa로 초저응력 및 향상된 열 특성을 나타내었으나, 광학 특성은 감소됨을 보였다. 가교형 폴리이미드 박막의 우수한 특성 발현은 고집적도 다층 구조의 안정성 및 신뢰도가 요구되는 분야의 응용성이 확대될 것으로 기대된다.

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

국제 경쟁력을 위한 술 포장디자인 연구 - 국내소주 및 일본 Sake 중심으로 - (A study on the liquor package design of international competitive advantage - Focused on Soju and Sake -)

  • 장욱선
    • 디자인학연구
    • /
    • 제16권3호
    • /
    • pp.151-160
    • /
    • 2003
  • 21세기의 정보화 시대에는 국가간, 지역간 무역의 장벽이 사라지고 다변화하는 무한경쟁시대로 변모하게 될 것이다. 포장산업은 판매부터 폭넓은 시장에서 모든 계층의 소비자 욕구를 충족시키는 기업위주의 마케팅 활동이 가능하였다. 따라서 이 시대에 요구되는 술 포장디자인은 시장구조가 양적, 질적으로 다양해지면서 제품이미지를 계획적으로 통제, 운영하지 않으면 자사 브랜드의 시장력이 저하될 수 밖에 없는 현실이다. 이제 술 포장디자인은 물질적, 생산지 1차 기능의 충족을 위한 수단으로만 존재하는 것이아니라 인간의 만족과 정서적 풍요로움을 가능하게 해줄 수 있어야만 한다. 그러한 가치 형성의 배경은 여러 가지 다각적 측면으로 분석되어진다. 술 포장디자인 그 시대의 기초와 취미 소비자의 질서가 가장 적절하게 표현되는 대중문화를 선동하는 사회적, 문화적 파급효과에 이르고 있다. 그리한 변화에 따라 소비자의 의식구조, 라이프 스타일 변화 시장 구조 계층을 변화시켰으며 술 시장의 세분화를 더욱 더 촉진 시켰다고 할 수 있다. 이에 본 논문은 세분화된 소비계층의 중심인 술 포장디자인의 커뮤니케이션 할 수 있는 효율성을 도모하고 술 소비자의 계층구조에 대한 이론적 고찰을 하고자한다. 또한 술 포장디자인의 전략의 특성을 파악하고, 술 포장디자인이라는 매개체를 통하여 상호유기성 통하여 보다 효율적인 소비자 커뮤니케이션에 접근토록 하는 새로운 전략적 방안을 제시하고자 한다.

  • PDF

Li2CO3 첨가에 따른 입방정 Bi1.5Zn1.0Nb1.5O7(c-BZN)의 상 변화 및 그에 따른 유전특성 변화 연구 (A Study on the Phase Change of Cubic Bi1.5Zn1.0Nb1.5O7(c-BZN) and the Corresponding Change in Dielectric Properties According to the Addition of Li2CO3)

  • 이유선;김윤석;최슬원;한성민;이경호
    • 마이크로전자및패키징학회지
    • /
    • 제30권4호
    • /
    • pp.79-85
    • /
    • 2023
  • (1-4x)Bi1.5Zn1.0Nb1.5O7-3xBi2Zn2/3Nb4/3O7-2xLiZnNbO4(x=0.03-0.21) 조성의 새로운 저온 동시 소성 세라믹(LTCC) 유전체는 Bi1.5Zn1.0Nb1.5O7-xLi2CO3(x=0.03-0.21) 혼합물을 850℃~920℃에서 4 시간 반응성 액상소결(reactive liquid phase sintering)을 하여 제조하였다. 소결이 진행되는 동안 Li2CO3는 Bi1.5Zn1.0Nb1.5O7과 반응하여 Bi2Zn2/3Nb4/3O7과 LiZnNbO4를 생성하였고 얻어진 소결체의 상대 소결밀도는 이론 밀도의 96% 이상이었다. 초기 Li2CO3 함량(x)을 조절하여 최종 소결체내에 존재하는 Bi1.5Zn1.0Nb1.5O7, Bi2Zn2/3Nb4/3O7 및 LiZnNbO4 상의 상대적인 함량을 제어함으로써 높은 유전율(εr), 낮은 유전손실(tan δ) 및 NP0 특성(TCε ≤ ±30 ppm/℃)의 유전율 온도계수(TCε)를 갖는 유전체를 개발할 수 있었다. Li2CO3의 첨가가 x=0.03 mol에서 x=0.15 mol로 증가함에 따라 얻어진 복합체 내의 Bi2Zn2/3Nb4/3O7와 LiZnNbO4의 부피 분율은 증가하였고, Bi1.5Zn1.0Nb1.5O7의 부피 분율은 감소하였다. 그 결과 복합체의 유전율(εr)은 148.38에서 126.99로 유전손실(tan δ)은 5.29×10-4에서 3.31×10-4로 그리고 유전율 온도계수(TCε)는 -340.35 ppm/℃에서 299.67 ppm/℃로 변화되었다. NP0 특성을 갖는 유전체는 Li2CO3의 함량이 x=0.09일 때 얻을 수 있었고, 이 때의 유전율(εr)은 143.06, 유전손실(tan δ)값은 4.31×10-4, 그리고 유전율 온도계수(TCε)값은 -9.98 ppm/℃ 이었다. Ag전극과의 화학적 호환성 실험은 개발된 복합 재료는 Ag 전극과 동시 소성 과정에서 전극과 반응이 없음을 보여주었다.