• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1451-1454
• /
• 2006

We propose a new electrical test method bringing repeatable and unambiguous test results eliminating drawbacks of the lighting test for LCD Cell manufacturing process. In this paper, we will show its basic concept, examples of actual test results and effectiveness of the method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.805-807
• /
• 2005

A basic assessment is presented of the technical, economic and strategic challenges expected for manufacturing displays in a roll-to-roll format. Two general pathways are considered; one that results in dramatic cost reductions but results in sacrificing product performance, and another which is an extension of the conventional FPD cost-reduction from increased substrate size. While Roll-to-Roll fabrication is fundamentally possible, feasibility experiments will be required to address the most significant technical challenge: achieving and managing acceptable yield. In all respects, the efforts to achieve RTR manufacturing will be assisted by overlapping interests in other application areas such as flex circuit, photovoltaics and large area lighting.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1216-1219
• /
• 2009

Recently,electroluminescence devices based on organic semiconductors have made considerable progress. Displays based on organic light emitting diodes (OLED) are commercially available. To gain broader acceptance, the performance of OLED devices has to be further improved, in particular for lighting. This article discusses the possibility to use controlled electrical doping for improving the properties of devices and new approaches for highly efficient white OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.121-124
• /
• 2009

We developed a panel of innovative solution-based approaches for synthesis of multicomponent sulfide phosphor materials. The application of these synthesis strategies allowed for preparation of high-purity and high-brightness $BaAl_2S_4:Eu$ and $Ba_2SiS_4:Eu$ phosphors and led to the discovery of new phosphors suitable for application in the LED-based lighting including $Sr_2ZnS_3:Eu$, $CaBaSiS_4:Eu$ and $(Ba,Sr)_2ZnS_3:Eu$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.125-126
• /
• 2009

In this study, we report the room temperature synthesis and luminescence properties of white-light-emitting Rb(V,P)$O_3$. The vanadate phosphor, RbV$O_3$, was synthesized by simple mixing of $RbCO_3$ and $V_2O_5$ at room temperature in air. New direct room temperature solidstate reaction is a cost-effective method to synthesize the above luminescent materials.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.45-49
• /
• 2015

Process gases with vapor or liquid phase as well as gas phase may experience alteration in itself or be contaminated in the fluid pipe to the process chamber. And thus it result in as particles or defects on the substrates in semiconductor, LCD, LED manufacturing. Purifiers and filters are used for control of contamination. However, none of detection device is available in the delivery line. In this paper, we propose simple device with lighting and sensing in order to predict contamination of the fluid or the tube wall. For some general purpose gases, it showed constant voltage output regardless of the flow rates. But, the smoke and the moisture in the air lowered the figure due to its concentration. Numerical values for several solid and liquid media were obtained. And, the operating temperature tendency was investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1692-1696
• /
• 2006

Dopant and host molecules for charge transport layer in OLED have been developed. They enable implementation of the PIN OLED technology in mass production. We review the status of PIN OLED with main focus on top-emission structures and operation stability at elevated temperatures. A green phosphorescent top-emission device with 2.5 V operating voltage and 90 lm/W at 1000 $cd/m^2$ is presented. For a red top-emission device, lifetime exceeding 100,000 h at 500 $cd/m^2$ initial brightness is reported. Operational stability at $80^{\circ}C$ has been investigated. A lifetime of 17,000 h at 500 $cd/m^2$ has been achieved. Finally, we comment on further reduction of the operating voltage in OLED.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.25-29
• /
• 2009

In this study, a thin plate-type heat pipe, instead of a solid aluminium heat sink, is used to eliminate heat released from LED components for lighting. Effects of the heat pipe size and installation angle are studied both in numerically and experimentally. According to the results, temperature on LED chip, when a heat pipe is used, is $1.2^{\circ}C$ lower than using the conventional metal PCB. The overall temperature drop is $32^{\circ}C$ if the heat pipe is properly used. The highest cooling performance is obtained in the case when the angle of a heat pipe installation is $90^{\circ}$.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2010

In this paper, we propose a web inspection system (WIS) for real-time detection of paper defects which can cause critical fractures during papermaking process. Our system incorporates high speed line-scan camera, lighting system, and detection algorithm to provide robust and precise detection of paper defects in real-time. Since edge defects are very crucial to the paper fractures, our system focuses on the edge region of the paper instead of inspecting the whole paper area. In our algorithm, image projection and sub-pixel operation are utilized to detect the edge defects precisely and connected component labeling and shape analysis techniques are adopted to extract various kinds of the region defects. Experimental results revealed that our web inspection system is very efficient for detecting paper defects during papermaking processes.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.23-29
• /
• 2009

To increase the data capacity of one-dimensional symbology, 2D barcodes have been proposed a decade ago. In this paper, a new 2D barcode detection algorithm based on Local Binary Pattern is presented. To locate 2D barcode symbols, a texture analysis scheme based on the Local Binary Pattern is adopted, and a gray-scale projection with sub-pixel operation is utilized to separate the symbol precisely from the input image. Finally, the segmented symbol is normalized using the inverse perspective transformation for the decoding process. The proposed method ensures high performances under various lighting/printing conditions and strong perspective deformations. Experiments show that our method is very robust and efficient in detecting the symbol area for the various types of 2D barcodes.