• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.825-830
• /
• 1990

This paper reports the design procedure and testing result of a servo driven pan/tilt device which is capable of tracking arbitrary movement of a specified target object. In order to achieve real-time acquisition of feedback signal, a 2 degrees-of-freedom non-contact type displacement follower is used. The performance of the system is tested for different target velocities and control gains. The result of the research may provide an effective tool for visual transfer in the context of teleoperation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.415-420
• /
• 2009

This paper presents a position tracking control of a flexible beam using the piezoelectric actuator. This is achieved by implementing both feedforward hysteretic compensator of the actuator and PID feedback controller. The Preisach model is adopted to develop the feedforward hysteretic compensator. In the design of the compensator, estimated displacement of the piezoceramic actuator is used on the basis of the limiting triangle database that results from collecting data of the main reversal curve and the first order ascending curves. Experimental implementation is conducted for position tracking control and performance comparison is made between a PID feedback controller without considering the effect of hysteresis, and a PID feedback controller integrated with the feedforward hysteretic compensator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.182-184
• /
• 2005

An embedded system has been applied to many fields including households and industrial sites. The embedded system is implemented fur image tracking in security area. This system supports a fixed IP far the reliable server operation on TCP/IP networks. A real time video image on the is analyzed to detect a certain invader who jumped into the observed area. The digital camera is connected at the USB host port of the target board. The video images from the video camera is continuously analyzed and displayed at the Linux web-server. The moving vector of the invaders on the continuous image frames is calculated and then it sends the calculated pan/tilt movement. That used Block matching algorithm and edge detection algorithm for past speed. And the displacement vector is used at pan/tilt motor control through RS232 serial cable. The experiment result showed tracking performance by the moving part speed of 10 to 150 pixels/sec.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.41-52
• /
• 2012

Purpose: Triangulation is the process of determining the location of a point by measuring angles to it from known points at either end of a fixed baseline. This point can be fixed as the third point of a triangle with one known side and two known angles. The aim of this study was to find a clinically adaptable method for applying an optical tracking navigation system to orthognathic surgery and to estimate its accuracy of measuring the bone displacement by use of triangulation methods. Methods: In orthognathic surgery, the head position is not fixed as in neurosurgery, so that a head tracker is needed to establish the reference point on the head surface byusing an optical tracking system. However, the operation field is interfered by its bulkiness that makes its clinical use difficult. To solve this problem, we designed a method using an Aquaplast splinting material and a mini-screw in applying a head tracker on a patient's forehead. After that, we estimated the accuracy of measuring displacements of the ball marker by an optical tracking system with a conventional head tracker (Group A) and with a newly designed head tracker (Group B). Measured values of ball markers' displacements by each optical tracking system were compared with values obtained from fusion CT images for an estimation of accuracy. Results: The accuracy of the optical tracking system with a conventional head tracker (Group A) is not suitable for clinical usage. Measured and predictable errors are larger than 10 mm. The optical tracking system with a newly designed head tracker (Group B) shows 1.59 mm, 6.34 mm, and 9.52 mm errorsin threeclinical cases. Conclusion: Most errors were brought on mainly from a lack of reproducibility of the head tracker position. The accuracy of the optical tracking system with a newly designed head tracker can be a useful method in further orthognathic navigation surgery even though the average error is higher than 2.0 mm.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.95-104
• /
• 2012

In this paper, an estimation of person height and 3D location of a moving person by using the pan/tilt-embedded stereo tracking system is suggested and implemented. In the proposed system, face coordinates of a target person is detected from the sequential input stereo image pairs by using the YCbCr color model and phase-type correlation methods and then, using this data as well as the geometric information of the stereo tracking system, distance to the target from the stereo camera and 3-dimensional location information of a target person are extracted. Basing on these extracted data the pan/tilt system embedded in the stereo camera is controlled to adaptively track a moving person and as a result, moving trajectory of a target person can be obtained. From some experiments using 780 frames of the sequential stereo image pairs, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.5, 0.42 for 780 frames on average, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. These good experimental results suggest a possibility of implementation of a new stereo target tracking system having a high degree of accuracy and a very fast response time with this proposed algorithm.

• 한국운동역학회지
• /
• 제19권4호
• /
• pp.729-738
• /
• 2009

본 연구의 목적은 골프 퍼팅 시 숙련자와 초보자의 시각형태에 따른 운동학적 변인과 임펙트 시 퍼터 헤드의 정확성에 어떠한 차이가 있는지를 밝히는 것이다. 초보자 5명과 KPGA 세미프로 이상의 자격을 가진 5명의 선수들이 실험에 참여하였다. 3대의 카메라를 이용한 APAS(Ariel Performance Analysis System) 동작분석 시스템을 이용하여 퍼터헤드의 정확성과 운동학적 변인을 구하여 분석하였다. 본 연구의 결과로 퍼팅 시 볼의 정확성, 운동학적 분석의 결과를 토대로 볼 때, 숙련자 집단에서는 퍼팅 시 시선형태가 전혀 영향을 미치지 않았다. 이는 곧 숙련자 집단의 경우 장기간의 연습을 통해 관절 동작이 고정되어 있어 기계적인 스트로크를 한다는 것을 확인할 수 있었다. 하지만, 초보자 집단의 경우 시선형태에 따른 퍼팅 양쪽 모두 어느 정도의 장 단점을 가지고 있는 것으로 판단된다. 또한, 퍼터헤드의 변위가 속도보다 정확성에 더 큰 영향이 미치는 것으로 사료된다.

• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.338-347
• /
• 2005

본 논문에서는 이동물체의 변위 예측을 위한 시간솎음 탐색 방향 알고리즘 제안하여 고속이동물체의 추적과 속도 측정을 하였다. 제안된 알고리즘은 이동물체의 이동 방향을 예측하기 위하여 초기 방향은 시간적으로 연속하는 과거 두 프레임에서 이동물체를 검출하고 이동 각도와 이동 거리를 구하여 초기화하였다. 현재 프레임에서 이동물체의 이동 방향은 시간솎음 탐색 방향 마스크를 적용하여 이동물체의 이동 방향을 구하였다. 시간솎음 탐색 방향 마스크는 연속 프레임에서 프레임을 시간 솎음하여 이동물체를 검출하고, 이동물체의 진행방향의 예측은 8 방향 중에서 이동물체의 이동 각도를 구하여 탐색 마스크를 결정하고, 탐색 마스크에 의해 이동물체의 이동 방향을 예측하였다. 제안한 알고리즘의 타당성을 입증하기 위하여 고속으로 주행 중인 자동차의 추적과 속도를 측정하고, 성능을 평가하기 위하여 전역탐색기법과 제안된 방법을 비교 평가하였다. 그 결과, 제안된 방법에서는 이동물체 변위 탐색 횟수가 평균 91.8$\%$ 감소하였고, 추적 처리 시간은 평균 32.1ms 임을 보임으로서 이동물체 추적을 실시간적으로 실행할 수 있음을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1377-1381
• /
• 2003

This paper describes real time object tracking of 3D objects in 2D image sequences. The moving objects are segmented from the image sequence using morphological operations. The moving objects are segmented by the method of differential image followed by the process of morphological dilation. The moving objects are recognized and tracked using statistical moments. The direction of moving objects are determined by the Hough transform. The straight lines in the moving objects are found with the help of Hough transform. The direction of the moving object is calculated from the orientation of the straight lines in the direction of the principal axes of the moving objects. The direction of the moving object and the displacement of the object in the image sequence is used to calculate the velocity of the moving objects. The simulation results of the proposed method are promising on the test images.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.406-408
• /
• 2001

In this thesis, a video tracker with a TMS320C31 DSP is designed and implemented. It is intended to work with PC through PCI Bus and can be used in real-time applications. The DSP board is capable of grabbing image data from camera, and calculating the position of a target, and tracking its movement. The tracking situation can be displayed in a PC monitor and displacement of the movement is fed back to pan and tilt the camera. Experimental results show that the tracker implemented here works well in real applications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.621-624
• /
• 1999

This paper describes a distance estimation method of object's motion in soccer image sequence by tracking field features. And we quantitatively evaluate the estimation accuracy We suppose that the input image sequence is taken with a camera on static axis and includes only zooming and panning transformation between frames. Adaptive template matching is adopted for non-rigid object tracking. For background compensation, feature templates selected from reference frame image are matched in following frames and the matched feature point pairs are used in computing Affine motion parameters. A perspective displacement field model is used for estimating the real distance between two position on Input Image. To quantitatively evaluate the accuracy of the estimation, we synthesized a 3 dimensional virtual stadium with graphic tools and experimented on the synthesized 2 dimensional image sequences. The experiment shows that the average of the error between the actual moving distance and the estimated distance is 1.84%.