• 한국해안해양공학회지
• /
• 제19권3호
• /
• pp.222-227
• /
• 2007

심해에서 생성된 최극해파가 파랑과 상호작용하는 현상에 대한 연구를 수행하였다. 이러한 파랑은 분산집중을 이용하여 산정하였다. 이러한 과정은 선형 및 비선형 방정식의 해를 구하여 얻을 수 있다. 상호작용에서 비선형성의 역할을 강조하였다.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.305-312
• /
• 2012

We numerically demonstrate the performance of a plasmonic lens composed of an array of nanoslits perforated on thin metallic film with slanted cuts on the output surface. Embedding Kerr nonlinear material in nanoslits is employed to modulate the output beam. A two dimensional nonlinear-dispersive finite-difference time-domain (2D N-D-FDTD) method is utilized. The performance parameters of the proposed lens such as focal length, full-width half-maximum, depth of focus and the efficiency of focusing are investigated. The structure is illuminated by a TM-polarized plane wave and a Gaussian beam. The effect of the beam waist of the Gaussian beam and the incident light intensity on the focusing effect is explored. An exact formula is proposed to derive electric field E from electric flux density D in a Kerr-Dispersive medium. Surface plasmon (SPs) modes and Fabry-Perot (F-P) resonances are used to explain the physical origin of the light focusing phenomenon. Focused ion beam milling can be implemented to fabricate the proposed lens. It can find valuable potential applications in integrated optics and for tuning purposes.

• 비파괴검사학회지
• /
• 제32권6호
• /
• pp.703-710
• /
• 2012

A structural health monitoring technique for locating impact position in a composite plate is presented in this paper. The method employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the spatial focusing efficiency of both approaches at the impact position and its surroundings through impact experiments. The imaging results of impact localization show that the impact location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring knowledge of anisotropic material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testing of plate-like structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.715-722
• /
• 2012

A structural health monitoring (SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal (TR) and inverse filtering (IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.152-159
• /
• 2013

A structural health monitoring(SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.47-55
• /
• 2012

본 논문에서는 단일 센서와 시간역전 원리를 이용하여 간단한 판에서 충격 위치를 결정할 수 있는 탐상법을 다루었다. 수치적인 시뮬레이션과 실험을 통하여 시간역전에 의한 충격위치와 그 주변에서 신호의 집속효과를 관찰하고, 충격위치 결정에 영향을 미칠 수 있는 인자들(가진력의 크기, 신호의 기록시간)에 대해 살펴보았다. 이러한 결과를 기초로 두 가지 다른 충격위치에 대한 실험을 수행하고 그 결과를 가시화하였으며, 실제 충격위치를 정확하게 결정할 수 있음을 확인하였다. 여기서 제안한 방법의 특징은 단일센서를 사용하는 것과 시험체의 형상과 물성을 몰라도 된다는 점이다. 또한 판에서와 같이 분산성의 다중모드 파동이 발생하는 경우에도 특정 모드나 주파수에 의존할 필요가 없다. 따라서 기존의 충격위치 결정법에 비해 많은 장점을 지니고 있다.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.127-140
• /
• 1999

In this paper, a microscopic analysis of prefinitelv strained cement paste specimen was carried out. The microscopic behavior of concrete under triaxial stress must be fully understood in order to explain the additional ductilitv that comes from lateral confinement and to get microstructural information in large deformed and large strained concrete. The so-called "tube-squash" test was applied to achieve enormously high shear and deviatoric strain of concrete under extremly high pressure without fracture. Then, microscopic analyses by focusing on hydration and microstructure of Prefinitely strained cement paste were carried out on cored-out deformed and virgin (undeformed) cement paste specimens : the first specimen being 40 days old, the second one being one year old. The microscopic analysis bv Field Emission Scanning Electronic Microscope (FESEM) was carried out for comparison between the specimens after 40 days and those arter one year. For one year old specimens, X-Ray Diffractometer (XRD) analysis, Energy Dispersive x-rav Spectrometer (EDS) analysis, and Differential Thermal Analysis/Thermo-Gravitv (DTA/TG) analysis were also carried out to study the hydration and the microstructures of prefinitely strained cement paste specimen by focusing on the methodologies of their microscopic analyses. analyses.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.36.2-36.2
• /
• 2010

A small amount of Na incorporated in $CuInSe_2$ (CIS) absorption layer has become widely accepted as a requirement for efficient polycrystalline CIS solar cells. However, there is ongoing argument on the role of sodium incorporated in the absorber. In this paper, CIS absorption layers have been deposited using the three-stage co-evaporation process on Mo coated non-Alkali glass substrates. The NaF was evaporated during the second-stage with various fluxes. This paper is focusing on differences of micro-structure and composition ratio of the absorber realized with different Na contents and the variation of electrical properties of the cells with the corresponding absorbers. The analytical results of x-ray diffraction (XRD) patterns, field emission scanning electron microscope (FE-SEM), energy dispersive spectroscopy (EDS) and current-voltage characteristics will be discussed to investigate the effect of NaF flux on the CIS absorber formation and its cell performance.

• 패션비즈니스
• /
• 제17권4호
• /
• pp.40-57
• /
• 2013

In examining the relationship between fashion and art which are intimately interrelated, the body is a suitable subject in that it is the common object of representation. This study investigates and compares the images of the body in Francis Bacon's paintings from 1940s to 1970s and the formative aspect and aesthetic value of the abstract body images in Rei Kawakubo's designs since 1980s. The figures in Bacon's paintings are confusingly and atypically deformed as well as distorted, which are the combinations of the anatomies without references, not so much represented objects as experienced sense. Kawakubo's designs attempt to deform the body, moreover, she transforms the body; represent abstract forms without association with any other figures that exist, emphasizing sculptural or architectural shapes of garment. She suggests extensive visual language of dress by challenging the norms of beauty. The body in Bacon and Kawakubo's works is dispersive as well as complex in that the body images are deconstructed, fragmented, and exaggerated. Respectively, they articulate the perception of the body in postmodernism era by destroying the myth of subject; furthermore establish the aesthetics that transcend conventional ideals by reevaluating as well as refusing the standards of beauty.

• 한국가스학회지
• /
• 제12권4호
• /
• pp.63-68
• /
• 2008

본 논문은 적외선 센서의 광 강도 및 효율을 증가시키기 위해 새로운 오목한 반사 벽면(curved mirror surface)과 기존의 수직 반사 벽면(vertical mirror surface)구조와의 모의해석 및 실험 결과에 대해 기술하였다. 모의해석 결과 수직 반사 벽면을 사용했을 때 적외선 센서 필터 표면에 도달하는 광의 분포는 타원 형상으로 적외선 센서 표면에 도달함을 볼 수 있고, 오목한 반사 벽면을 사용하는 경우에는 광이 원형상으로 집광되는 것을 볼 수 있었다. 따라서 초기 평행광의 면적보다 작은 면적으로 집광됨으로 인해 단위면적당 광 강도는 향상되고, 이에 따라 광학적 센서의 출력전압은 향상될 것이라 예측되었다. 이 모의해석을 근간으로 하여 $25^{\circ}C$, 45%R.H.에서 이산화탄소를 0 ppm에서 2500 ppm까지 250 ppm 간격으로 주입시켰을 때, 오목한 반사 벽면의 광 공동이 수직 반사 벽면의 광 공동보다 출력전압이 약 200 mV 증가하였다.