• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.229-235
• /
• 2009

Millimeter-scale aligned arrays of thin-multiwalled carbon nanotube (t-MWCNT) on layered Si substrates have been synthesized by oxygen-assisted microwave plasma chemical vapor deposition (MPCVD). We have succeeded in growth of vertically aligned MWCNTs up to 2.7 mm in height for 150 min. The effect of $O_2$ and water vapour on growth rate was systematically investigated. In the case of $O_2$ gas, the growth rate was ${\sim}22{\mu}m/min$, which is outstanding growth rate comparing with those of conventional thermal CVD (TCVD). Scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS), and Raman spectroscopy were used to analyze the CNT morphology, composition and growth mechanism. The role of $O_2$ gas during the CNT growth was discussed on.

• Membrane Journal
• /
• v.24 no.2
• /
• pp.151-157
• /
• 2014

In this study, the nanofiber composite membrane was prepared by electrospinning method with poly (ancrylonitrile) (PAN) and a dispersed solution of graphene oxide (GO) and $Fe_3O_4$ functionalized graphene oxide (M-GO) in dimethyl formamide (DMF). The pore-diameter of prepared membranes was controlled by change of those layers. It was confirmed with SEM that the nanofiber composite membranes having fiber size of 500 nm were prepared. It was found with Raman spectroscopy and EDS that GO and M-GO were well dispersed on those membranes. Final nanofiber composite membrane showed the similar pore properties ($0.21{\sim}0.24{\mu}m$/pore-size, 40% porosity) with the commercial membrane ($0.27{\mu}m$/pore-size, 55% porosity) and their water-flux results also showed the 200% higher flux than its PAN membrane. From these results, it was expected that the nanofiber composite membrane prepared by electrospinning method could be utilized as a water-treatment membrane.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1522-1522
• /
• 2001

Beverages based on fruit juices are among the most popular commercially available drinks. There is an ever-increasing demand for these juices in the market. Orange juice is one of the most common as well as most favorite flavor. The fruit processing industries have a tremendous responsibility of quality control. For quality evaluation estimation of various components of the juice is necessary. Sucrose, glucose, fructose, citric acid and malic acid are the prime components of orange juice. Little information is available on analysis of orange juice. However, conventional and general wet chemistry procedures are currently being used which are no longer desired by the industry owing to the time involved, labor input and harmful chemicals required for each analysis. Need to replace these techniques with new, highly specific and automated sophisticated techniques viz. HPLC and spectroscopy has been realized since long time. Potential of Near Infrared Spectroscopy in quantitative analysis of different components of food samples has also been well established. A rapid, non-destructive and accurate technique based on Near Infrared Spectroscopy for determination of sugars and organic acids in orange juice will be highly useful. The current study is an investigation into the potential of Near Infrared Diffuse Reflectance Spectroscopy for rapid quantitative analysis of sucrose, glucose, fructose citric acid and malic acid in orange juice. All the Near Infrared measurements were peformed on a dispersive NIR spectrophotometer (ELICO 153) in diffuse reflectance mode. The spectral region from 1100 to 2500nm has been explored. The calibration has been performed on synthetic samples that are mixtures of sucrose, glucose, fructose, citric acid and malic acid in different concentration ranges typically encountered real orange juice. These synthetic samples are therefore considered to be representatives of natural juices. All the Near Infrared spectra of synthetic samples were subjected to mathematical analysis using Partial Least Square (PLS) algorithm. After the validation, calibration was applied to commercially available real samples and freshly squeezed natural juice samples. The actual concentrations were compared with those predicted from calibration curve. A good correlation is obtained between actual and predicted values as indicated by correlation coefficient ($R^2$) value, which is close to unity, showing the feasibility of the technique.

• Journal of Conservation Science
• /
• v.22
• /
• pp.87-98
• /
• 2008

Microstructures and chemical compositions of 24 bronze mirrors recovered from the Korean peninsula were examined using the scanning electron microscope equipped with the energy dispersive spectrometer in an effort to characterize the treatments applied on their surface. Their provenance and chronology are mostly unspecified except for two objects from a Koryo burial site. In antiquity the surface of bronze mirrors was frequently finished by mere polishing when their tin content was high enough to guarantee the required reflectivity. In many cases, however, their surface was given a special treatment. The most typical treatment was to coat the surface with tin in two different processes referred to as wipe-tinning and amalgam-tinning. In wipe-tinning only tin was used, but in amalgam-tinning tin and mercury were used together. The surface was often coated with mercury in a process known as mercury-polishing. The present mirrors showed that all these techniques were in fact practiced, not only on the reflective surface but, in some cases, on the decorative surface. The detection of mercury played a crucial role in the assessment of a specific technique applied in each mirror. Mercury often remained in the substrate in the form of sulfide and thereby allowed the method of surface treatment to be estimated even when the coated layer was completely lost. The future study is expected to uncover the regional and temporal variation of the surface treatments to the better understanding of bronze mirrors with respect to provenance and chronology.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.116-121
• /
• 2007

TiNi shape memory alloy(SMA) was fabricated by PLD(plused laser deposition) using equiatomic TiNi target. Composition and crystallization of TiNi thin films which were fabricated in ambient Ar gas(200m Torr)and vacuum($5{\times}10^{-6}\;Torr$) were investigated. Composition of TiNi thin films was characterized by energy-dispersive X-ray spectrometry (EDXS) and crystallization was confirmed by X-ray diffraction (XRD). The composition of films depends on the distance between target and substrate but does not sensitively depend on the substrate temperature. It is found that the composition of films can be easily controlled when substrate is placed inside plume in ambient Ar gas. It is also found that the in situ crystallization temperature ($ca.\;400^{\circ}C$) in ambient Ar gas is lowered in comparison with that of TiNi film prepared under vacuum. The low crystallization temperature in ambient Ar gas makes it possible to prepare the crystalline TiNi thin film without contamination.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.1
• /
• pp.48-54
• /
• 1997

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. The copper-tolerant bacteria, Pseudomonas stutzeri which possessed the ability to accumulate copper, was isolated from mine wastewaters polluted with various heavy metals. The characteristics of copper accumulation in the cells and the recovery of the copper from the cells accumulating zinc, were investigated. Removal rate of copper from the solution containing 100mg/l of copper by copper-tolerant bacteria was more than 78% at 2 days after inoculation with the cells. A large number of the electron-dense granules were found mainly on the cell wall and cell membrane fractions, when determined by transmission electron microscopy. Energy dispersive X-ray spectroscopy revealed that the electron-dense granules were copper complex with the substances binding copper. The copper accumulated into the cells was not desorbed by deistilled water, but more than 80% of the copper accumulated was desorbed by 0.1M-EDTA solution. The residues of the cells after combustion at $550^{\circ}C$ amounted to about 23.2% of the dry weight of the cells. EDS analysis showed that residues were relatively pure copper compound containing more than 78.4% of copper.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.769-774
• /
• 2005

Fluosilicic acid(H2SiF6) is recovered as an aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded H3PO4 or HF. Generally, fluosilicates are the salts produced by the reaction of H2SiF6 and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. This study was performed to know mechanical properties and watertightness using fluosilicates based composite made from fluosilicates and other compounds. Mix proportions for experiments were modulated at 0.45 of water to cement ratio and $0.0-2.0\%$ of adding ratio of fluosilicates based composite. Evaluation for mechanical properties of concrete was conducted to know fresh state of concrete, hardening state of concrete, and watertightness. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. In addition. Scanning Electron Microscopy(SEM) and Energy Dispersive X-Ray(EDX) used for investigating micro-structure and atomic component distributed in hardened concrete. It is ascertained that characteristics of mechanical properties and watertightness was more improved than non-added because of packing role of fluosilicates based composite and pozzolanic reaction of soluble $SiO_2$. Also, concrete added fluosilicates based composite had a tendency to delay setting time and only $0.5\%$ addition of fluosilicates based composite delayed 150 minutes compared with non-added.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.313-320
• /
• 2016

The aim of this study was to obtain information on the ancient material of cast bronze through an investigation of the microstructure and impurity characteristics of the casting. Three Koryo bronze coins were analyzed using an optical microscope, scanning electron microscope, and electron dispersive X-ray analyses were used to determine the composition of the specimens. The three coins had 4 phases: ${\alpha}phase$, ${\delta}phase$, Pb, and impurities ($Cu_2S$). $Cu_2S$ was found to exist near Pb or in ${\delta}phase$. $Cu_2S$ is the inter mediate product of copper ore refining. Therefore, the copper ore was not completely refined. To find out the characteristic of $Cu_2S$, we melt 1)Koryo bronze coin and 2)$Cu_2S$ and Pb powder at 1273 K. The reaction between $Cu_2S$ and Pb at 1273 K yielded fine Cu and black gas, which was identified to be PbS and is presented below: $Cu_2S+Pb{\rightarrow}PbS{\uparrow}+2Cu$.

• Journal of Dairy Science and Biotechnology
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2007

Contents of scorched particles in infant formula were studied to provide a scientific evidence for standardization of Food Regulation in Korea. The specification of scorched particles in infant formula in Korea was satisfied with CODEX, USDA and so on. But food regulations for scorched particles in baby food are not mentioned in Korea. Nowadays social interests of scorched particles in infant formula are being increased in the respect of safety for baby food. The composition and contents of scorched particles were analyzed with Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer(SEM-EDS) and Inductively Coupled Plasma Mass Spectrometer(ICP-MS). The results indicate that the scorched particles consist Ca, Na, Fe, Mg and trace elements derived from the ingredient of infant formula. Infant formula are composed of milk, skimmed milk, whey, mixed vegetable oils, minerals and vitamins. These results also show that the contents of scorched particles of infant formula in Korea are little or similar level to those reported in other countries. In general, heavy metals derived from scorched particle are originally used as a source of minerals in infant formula. And it has been thought that they doesn't effect on Provisional Tolerable Weekly Intake set by FAO/WHO for contents and composition of scorched particles.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.296-313
• /
• 2014

A QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) multiresidue method was developed for the simultaneous analysis of 124 pesticides in soil by LC-MS. The procedure involved liquid extraction of soil immersed with 0.2N $NH_4Cl$ by acetonitrile with 1% acetic acid, followed by anhydrous $MgSO_4$ and sodium acetate, and dispersive SPE cleanup with $MgSO_4$, primary secondary amine (PSA) and $C_{18}$. The extracts were analyzed with LC-MS/MS in ESI positive mode. Standard calibration curves were made by matrix matched standards and their correlation coefficients were higher than 0.99. Recovery studies for the validation were carried out using two type soils, loam and sandy loam, at four concentration levels (0.005, 0.01, 0.02, and 0.1 mg/kg). The recoveries of pesticides were in the range of 70-120% with < 20% RSD except 4 pesticides, Benfuracarb, Ethiofencarb, Pymetrozine, and Pyrethrin. This result indicated that the method using QuEChERS and LC-MS/MS could be applied for the simultaneous determination of pesticide residues in soils.