• Title/Summary/Keyword: dispersion relationship

Search Result 205, Processing Time 0.027 seconds

Ostwald Ripening Stability of Curcumin-Loaded MCT Nanoemulsion: Influence of Various Emulsifiers

  • Kim, Sun-Hyung;Ji, Yeun-Sun;Lee, Eui-Seok;Hong, Soon-Taek
    • Preventive Nutrition and Food Science
    • /
    • v.21 no.3
    • /
    • pp.289-295
    • /
    • 2016
  • Curcumin is a flavonoid found in the rhizome of the turmeric plant (Curcuma longa L.) and has recently attracted interest because it has numerous biological functions and therapeutic properties. In the present study, we attempted to incorporate curcumin into medium-chain triglyceride (MCT) nanoemulsions (0.15 wt% curcumin, 10 wt% MCT oil, and 10 wt% emulsifiers) with various emulsifiers [polyoxyethylene (20) sorbitan monolaurate (Tween-20), sorbitan monooleate (SM), and soy lecithin (SL)]. The physicochemical properties of the nanoemulsions including the Ostwald ripening stability were investigated. The initial droplet size was found to be 89.08 nm for the nanoemulsion with 10 wt% Tween-20 (control), and when Tween-20 was partially replaced with SM and SL, the size decreased: 73.43 nm with 4 wt% SM+6 wt% Tween-20 and 67.68 nm with 4 wt% SL+6 wt% Tween-20 (prepared at 15,000 psi). When the nanoemulsions were stored for 28 days at room temperature, the droplet size increased as the storage time increased. The largest increase was observed for the control nanoemulsion, followed by the 4 wt% SL+6 wt% Tween-20 and 4 wt% SM+6 wt% Tween-20 systems. The Turbiscan dispersion stability results strongly supported the relationship between droplet size and storage time. The time-dependent increase in droplet size was attributed to the Ostwald ripening phenomenon. Thus, the Ostwald ripening stability of curcumin-loaded MCT nanoemulsions with Tween-20 was considerably improved by partially replacing the Tween-20 with SM or SL. In addition, curcumin may have acted as an Ostwald ripening inhibitor.

A Study on Improvement of Connection Method of Underground Parking Lot SP Equipment Water Supply Pipe for Effective Fire Activities (효과적인 소방활동을 위한 지하주차장 스프링클러설비 송수배관 연결방식의 개선에 관한 연구)

  • Son, Gae-Seong;Choi, Ji-Hun;Choi, Don-Mook
    • Journal of the Korea Safety Management & Science
    • /
    • v.17 no.4
    • /
    • pp.161-169
    • /
    • 2015
  • A fire sprinkler system is very important to extinguish fire in the building. The sprinkler system initiates sprinkler discharge if the detection system identifies a developing fire and opens the pre-action valve. However, pre-action fire sprinkler systems mainly installed in the underground parking lot at the apartment complex do not properly operate at fire if the connection type of fire sprinkler systems does not properly installed and operated. This study identified the relationship between fire dispersion & damage and the connection type of water supply in the sprinkler system from many fire cases at the apartment complex in South Korea. In addition, this study also identified the water supply differences and characteristics between South Korea and foreign countries. The main purpose of this study is also to improve the water connection types in the sprinkler system that can reduce the potential failures of pre-action valve operation through electrical signal system. The study also suggests the improvement plan for water connection types in pre-action fire sprinkler system that can minimize potential failure of pre-action fire sprinkler system. The suggestions for revising the fire safe standard in South Korea includes letting the water supply pipe of sprinkler system water inlet connect to the second side of pre-action valve and the water flow device that can minimize potential failure of sprinkler system.

A Study on the Variables Influencing on Adolescents Consciousness and Behavior in Pro-environmental Consumption - In Relation with Their Mothers' Pro-environmental Consuming Behavior - (청소년의 환경친화적 소비의식과 소비행동에 영향을 미치는 변수에 관한 연구 -어머니의 환경친화적 소비행동과 관련하여-)

  • Yee, Kyung-Eun;Lee, Ki-Young
    • Journal of Family Resource Management and Policy Review
    • /
    • v.12 no.3
    • /
    • pp.119-145
    • /
    • 2008
  • This study was designed to verify the influence of mothers on their young adults in pro-environmental consuming consciousness and behavior. The compiled data are based on the responses of questionnaires from 278 young adults who reside in Seoul, Korea. The data were analyzed by frequency, standard deviation, mean, unitary dispersion, rank revolution analysis, analysis of variance (ANOVA), and multiple regression analysis by SPSS 14.0K for Windows. This study has discovered the following: First. A mother's pro-environmental consuming behavior is one of the most important factors significantly influencing a young adult's consciousness and behavior. Second. A friendly and positive consciousness about the environment enhances pro-environmental consuming behavior. A close inter-relationship exists between consciousness and behavior. However, some significant discrepancy was found between pro-environmental consuming consciousness and pro-environmental consuming behavior; that is, the level of pro-environmental consciousness was higher than the level of pro-environmental behavior. Third. Sensitivity to environmental information influenced pro-environmental consumption consciousness and behavior. Female students are more concerned about and sensitive to environmental matters than are male students. Fourth. Among the subordinate dependent variables, recycling behavior is most influenced by independent variables. Among the pro-environmental consuming behavior sector, a mother's disposal behavior exerts the most influence on the young adult's behavior. In the results of this study, it is pointed out that it is absolutely necessary fur young adults to bring up their practice level of pro-environmental purchase and consuming behaviors, and it is advised that appropriate and relevant education programs should be developed.

  • PDF

Effect of Middle-school students' food behabior on health condition and degree of study accomplishment (중학생의 식행동이 건강상태와 학업성취도에 미치는 영향)

  • 하점순
    • Journal of the Korean Home Economics Association
    • /
    • v.33 no.3
    • /
    • pp.225-242
    • /
    • 1995
  • This study was undertaken to review the relationship between middle-school students' food-behavior and their health conditions/school performances. For this purpose, 495 male and female middle-school students were sampled form seven middle schools located in Seoul for a questionnaire survey. The surveyed data were analysed with simple frequency, percentage, t-test, chi-square test, dispersion analysis, Pearson's correlation and hierarchical multiple-regression analysis which make use of the SPSS/PC+ package system. The results of survey can be summarized as follows; Most of students had three meals a day regularly, but some female students used to skip breakfast or supper. The amount of a mael was adequate. Their main night-smacks were fruits. The problem perceived by students was unbalanced meal ; Female students took more snack than that of male students. They usually took a snack a day. All students tended to take delicious snacks. The most favorate smack of students was fruits. Most students did not suffer any serious diseases, but some had one or more respiratory diseases. Female students had some or other physical troubles in their eyes, mouth, digesting organs, muscle/bone, skin and had fatigue. Female students had mental problems of depression, uneasiness and hostility. The average I.Q. of students was 117.4, and those who had higher I.Q. got much higher scores. The regularity and amount of meal and intake of animal food were all positively related with the growth of height and weight. And the taller, the higher I.Q. they had. Those students who took meals three times regularly and adequately, who had no coffee and snack and who took balanced meals were healthier in both physical and mental terms. In particular, those who had adequate amount of breakfast regularly were not only healthier but also had higher I.Q. and school performance.

  • PDF

Research Investigations at the Municipal (2×35) and Clinical (2×5 MW) Waste Incinerators in Sheffield, UK

  • Swithenbank, J.;Nasserzadeh, V.;Ewan, B.C.R.;Delay, I.;Lawrence, D.;Jones, B.
    • Clean Technology
    • /
    • v.2 no.2
    • /
    • pp.100-125
    • /
    • 1996
  • After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

  • PDF

Concept and Range of Industrial Cluster (산업클러스터의 개념과 범위)

  • Kwon, Ohyeok
    • Journal of the Korean Geographical Society
    • /
    • v.52 no.1
    • /
    • pp.55-71
    • /
    • 2017
  • This paper points out the semantic unclearness of the jargon "cluster" and suggests the substitution of "industrial cluster" for "cluster". Industrial cluster is the intersection of industrial agglomeration and cluster phenomenon while the actual concept of cluster includes not only industry cluster but also political administration cluster, science research cluster, art cluster, religion cluster, education cluster, etc. Partially reconstructing the concept and significance of industry cluster, industrial cluster is a geographic agglomeration of interconnected productional businesses in a particular industry, forming close industrial networks. The advantage of the agglomeration includes reducing the transaction cost between the businesses, promoting technological innovation and dispersion, facilitating the utilization of the professional workforce, sharing and connecting the external customer. Moreover, this paper discusses the range of the industrial cluster and its distinctness from the other similar concepts. There is a need to discriminate it from the other related jargons and to clarify their relationship. In particular, there is a task to eradicate the mixed usage of industrial cluster with the jargons related to space for learning and innovation.

  • PDF

Hydraulic Evaluation and Performance of On-Site Sanitation Systems in Central Thailand

  • Koottatep, Thammarat;Eamrat, Rawintra;Pussayanavin, Tatchai;Polprasert, Chongrak
    • Environmental Engineering Research
    • /
    • v.19 no.3
    • /
    • pp.269-274
    • /
    • 2014
  • On-site sanitation systems are typically installed to treat grey and toilet wastewaters in areas without sewer and centralized treatment systems. It is well known that, due to inappropriate design and operation, treatment performance of these systems in developing countries is not satisfactory in the removal of pathogens and organic matters. This research aimed to investigate the hydraulic conditions occurring in some on-site sanitation systems and the effects of hydraulic retention times (HRTs) on the system performance. The experiments were conducted with a laboratory-scale septic tank (40L in size) and an actual septic tank (600L in size), to test the hydraulic conditions by using tracer study with HRTs varying at 12, 24 and 48 hr. The experimental results showed the dispersion numbers to be in the range of 0.017-0.320 and the short-circuit ratios in the range of 0.014-0.031, indicating the reactors having a high level of sort-circuiting and approaching complete-mix conditions. The removal efficiency of $BOD_5$ was found to be 67% and the $k_{30}$ values for $BOD_5$ was $2.04day^{-1}$. A modified complete-mix model based on the relationship between $BOD_5$ removal efficiencies and HRTs was developed and validated with actual-scale septic tank data having a correlation coefficient ($R^2$) of 0.90. Therefore, to better protect our environment and minimizing health risks, new generation toilets should be developed that could minimize short-circuiting and improving treatment performance.

Detection of Land Subsidence and its Relationship with Land Cover Types using ESA Sentinel Satellites data: A case study of Quetta valley, Pakistan

  • Ahmad, Waqas;Kim, Dongkyun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.148-148
    • /
    • 2018
  • Land subsidence caused by excessive groundwater pumping is a serious hydro-geological hazard. The spatial variability in land use, unbalanced groundwater extraction and aquifer characteristics are the key factors which make the problem more difficult to monitor using conventional methods. This study uses the European Space Agency (ESA) Sentinel satellites to investigate and monitor land subsidence varying with different land covers and groundwater use in the arid Quetta valley, Pakistan. The Persistent Scattering Differential Interferometry of Synthetic Aperture Radar (PS-DInSAR) method was used to develop 28 subsidence interferograms of the study area for the period between 16 Oct 2014 and 06 Oct 2016 using ESA's Sentinel-1 SAR data. The uncertainty of DInSAR result is first minimized by removing the dynamic effect caused by atmospheric factors and then filtered using the radar Amplitude Dispersion Index (ADI) to select only the stable pixels. Finally the subsidence maps were generated by spatially interpolating the land subsidence at the stable pixels, the comparison of DInSAR subsidence with GPS readings showed an R 2 of 0.94 and mean absolute error of $5.7{\pm}4.1mm$. The subsidence maps were also analysed for the effect of aquifer type and 4 land covers which were derived from Sentienl-2 multispectral images. The analysis show that during the two year period, the study area experienced highly non-linear land subsidence ranging from 10 to 280 mm. The subsidence at different land covers was significantly different from each other except between the urban and barren land. The barren land and seasonally cultivated area show minor to moderate subsidence while the orchard and urban area with high groundwater extraction rate showed excessive amount of land subsidence. Moreover, the land subsidence and groundwater drawdown was found to be linearly proportional to each other.

  • PDF

Investigation of wave propagation in anisotropic plates via quasi 3D HSDT

  • Bouanati, Soumia;Benrahou, Kouider Halim;Atmane, Hassen Ait;Yahia, Sihame Ait;Bernard, Fabrice;Tounsi, Abdelouahed;Bedia, E.A. Adda
    • Geomechanics and Engineering
    • /
    • v.18 no.1
    • /
    • pp.85-96
    • /
    • 2019
  • A free vibration analysis and wave propagation of triclinic and orthotropic plate has been presented in this work using an efficient quasi 3D shear deformation theory. The novelty of this paper is to introducing this theory to minimize the number of unknowns which is three; instead four in other researches, to studying bulk waves in anisotropic plates, other than it can model plates with great thickness ratio, also. Another advantage of this theory is to permits us to show the effect of both bending and shear components and this is carried out by dividing the transverse displacement into the bending and shear parts. Hamilton's equations are a very potent formulation of the equations of analytic mechanics; it is used for the development of wave propagation equations in the anisotropic plates. The analytical dispersion relationship of this type of plate is obtained by solving an eigenvalue problem. The accuracy of the present model is verified by confronting our results with those available in open literature for anisotropic plates. Moreover Numerical examples are given to show the effects of wave number and thickness on free vibration and wave propagation in anisotropic plates.

Effect of the Alignment of Milled Carbon Fiber Dispersed in Various Solvents (Solvent 별 분산에 따른 Milled Carbon Fiber의 배열성 연구)

  • Lee, Sung-Kwon;Choi, Sung-Woong
    • Composites Research
    • /
    • v.35 no.1
    • /
    • pp.47-51
    • /
    • 2022
  • In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiberreinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.