• 한국건설순환자원학회논문집
• /
• 제2권3호
• /
• pp.188-195
• /
• 2014

방호 방폭용 뿜칠형 고성능 섬유보강 시멘트 복합재료(HPFRCC) 개발을 위한 기초적인 연구의 일환으로 페이스트, 모르타르 및 HPFRCC 각 단계에서 구성재료의 레올로지 특성을 평가하였다. 페이스트 단계에서 레올로지 실험결과, GGBFs 및 FA의 경우 혼합률 증가에 따라 소섬정도 및 항복응력은 감소되는 것으로 나타났으며, SF의 경우 혼합률 10% 이후부터 소성점도 및 항복응력이 급격하게 증가되는 것으로 나타났다. 모르타르 단계에서 레올로지 실험결과, 잔골재의 종류 즉, 잔골재의 입형 및 입도는 소성점도 및 항복응력에 많은 영향을 미치는 것으로 나타났으며, Vs/Vm의 변화는 항복응력 보다 소성점도에 더 큰 영향을 미치는 것으로 나타났다. HPFRCC 단계에서 유동성 및 레올로지의 실험결과, 섬유 혼입 후 유동성 및 섬유분산성 개선에는 SP 보다 VA가 더 유효한 것으로 나타났다.

• Applied Microscopy
• /
• 제32권4호
• /
• pp.311-317
• /
• 2002

입자 크기에 따라 상전이 경로가 달라지며 매우 큰 응집체로 존재하는 gibbsite 분말과 같은 재료의 정량적인 전이 구조 분석의 전제로서 입자 크기가 선택적인 TEM 시편의 준비가 절실히 요구된다. 입자 크기 선택성을 실현한 TEM 시편 준비의 방법론을 확립하기 위한 방안으로서 본 실험이 전개되었다. 약 1 wt%의 gibbsite 원료 분말을 에탄올 용매에 혼합 한 뒤, ball-milling에 의해 조분쇄 처리를 하고 증류수에 1 : 19의 비로 희석된 분산 조제, Darvan C, 0.25 vol%의 첨가와 함께 ultrasonic 처리를 하여 gibbsite suspension을 만들었다. 제조된 gibbsite suspension의 누적 농도 변화 관찰에 의한 침강 시간의 조정 후 정적 침강 분리에 의해 nm 크기별로 분리된 TEM 시편을 만들 수가 있었다. 시편의 전체적인 양상은 SEM으로 관찰하였고 개개 입자들의 morphology 는 TEM으로 분석하였다. 또한, 공정 과정 중의 상변화 가능성을 검토하기 위해 XRD 분석을 실시하였다.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• Archives of Pharmacal Research
• /
• 제28권6호
• /
• pp.736-742
• /
• 2005

Xyloglucan (XG), which exhibits thermal sol to gel transition, non-toxicity, and low gelation concentration, is of interest in the development of sustained release carriers for drug delivery. Drug-loaded XG beads were prepared by extruding dropwise a dispersion of indomethacin in aqueous XG solution (2 wt.-$\%$) through a syringe into corn oil. Enteric coating of XG bead was performed using Eudragit L 100 to improve the stability of XG bead in gastrointestinal (GI) track and to achieve gastroresistant drug release. Release behavior of indomethacin from XG beads in vitro was investigated as a function of loading content of drug, pH of release medium, and concentration of coating agent. Adhesive force of XG was also measured using the tensile test. Uniform-sized spherical beads with particle diameters ranging from 692 $\pm$ 30 to 819 $\pm$ 50 $\mu$m were obtained. The effect of drug content on the release of indomethacin from XG beads depended on the medium pH. Release of indomethacin from XG beads was retarded by coating with Eudragit and increased rapidly with the change in medium pH from 1.2 to 7.4. Adhesive force of XG was stronger than that of Carbopol 943 P, a well-known commercial mucoadhesive polymer, in wet state. Results indicate the enteric-coated XG beads may be suitable as a carrier for oral drug delivery of irritant drug in the stomach.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.227-232
• /
• 2008

화장품용 천연계면활성제를 개발하기 위해 도라지(platycodon grandiflorum) 껍질에서 유기용매를 이용하여 추출물을 얻었다. 도라지 추출물의 화장품용 계면활성을 측정하기 위해 계면장력, 용해도, 기포력, 분산력, 유화력, 유화활성, 유화안정성을 측정하였고 피부자극을 평가하기위해 첩포시험을 실시하였다. 도라지 사포닌 함량이 0.005 wt%일 때 castor oil에 대한 계면장력은 11.5 dyn/cm로 비교대상인 Tween 40이나 quillaja bark보다 낮은 계면활성을 보여주었다. 도라지 추출물은 화장품에 유상으로 사용되는 olive oil, soybean oil, canola oil에 대해서도 우수한 유화활성과 유화안정성을 나타내었다. 2~5%의 도라지 추출물과 글리세린을 사용한 피부자극 시험에서는 도라지 추출물은 약간의 피부자극을 보여 주었다. 결론적으로 도라지 추출물은 화장품용 계면활성력은 양호하나 다소의 피부자극을 보여주었다.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.37-44
• /
• 1986

Yttria-antimonia-stabilized zirconia was investigated with respect to the amount of $Sb_2O_3$ addition in the range of 0.5~5mole% to the base composition of $(ZrO)_{0.92}(Y_2O_3)_{0.08}$ The sinterbility modulus of rupture Vickers hardness evaporation of components phase form-tion and mcicrostructure were evaluated with antimonia content. Also two probe A. C conductivity measurement was subjected to all specimens and the best results are achieved with 1mol% $Sb_2O_3$ as a sinter agent and relative density of~98% obtained at 140$0^{\circ}C$ and this composition has a maximum electrical conductivity due to the possible substition of $Sb^{3+}$ for $Zr^{4+}$ site. The effect of $Sb_2O_3$ on the electrical conductivity of th bulk and the grain boundaries has on investigated using frequency dispersion analysis (5~106 Hz) Antimonia addition has a negative in-fluence on both the bulk and the grain boundary conductivity except for a 1 mon% addition. The additive antimonia has improve a modulus of rupture to 60~MPa due to metastable-tetragonal phase apparence and decrease the hardness with increasing the $Sb_2O_3$ content.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.18.2-18.2
• /
• 2010

For the past a few years, we have intensively researched the printable inorganic conductors and ZnO-based amorphous oxide semiconductors (AOSs) for thin-film transistors. For printable conductor materials, we have focused on the aqueous Ag and Cu ink which possess a variety of advantages, comparing with the conventional metal inks based on organic solvent system. The aqueous Ag ink was designed to achieve the long-term dispersion stability using a specific polymer which can act as a dispersant and capping agent, and the aqueous Cu ink was carefully formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. For printable ZnO-based AOSs, we have researched the noble way to resolve the critical problem, a high processing-temperature above $400^{\circ}C$, and recently discovered that Ga doping in ZnO-based AOSs promotes the formation of oxide lattice structures with oxygen vacancies at low annealing-temperatures, which is essential for acceptable thin-film transistor performance. The mobility dependence on annealing temperature and AOS composition was analyzed, and the chemical role of Ga are clarified, as are requirements for solution-processed, low-temperature annealed AOSs.

• 폴리머
• /
• 제24권6호
• /
• pp.744-750
• /
• 2000

PU계 유겔화제를 제조하기 위하여 soft segment로서 친유성을 갖는 polyether계 polyol인 PPG와 PTMG를 사용하고 hard segment로는 TDI를 사용하였다. PPG와 PTMG의 평균 분자량을 각각 1000, 2000, 3000으로 변화시키며 실험한 결과, PPG의 경우 분자량이 증가할수록 유겔화율은 290%에서 130%로 감소하였으며, PTMG의 경우 분자량이 증가할수록 310%에서 250%로 감소하였다. 친수성인 EG를 투입한 경우에 유겔화율은 EG를 첨가하지 않은 경우보다 약 2배 증가하였다. 이는 친수성기의 함량이 증가할수록 물/기름 혼합물에서의 prepolymer의 분산도 증가에 기인한 것으로 판단되며 PPG의 유겔화율은 290%에서 1120%로 증가하였고, PTMG의 유겔화율은 310%에서 1310%로 증가하였다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.68-78
• /
• 2006

In the past few years, considerable efforts have been directed towards the further development of Urea-SCR(selective catalytic reduction) technique for diesel-driven vehicle. Although urea possesses considerable advantages over Ammonia$(NH_3)$ in terms of toxicity and handling, its necessary decomposition into Ammonia and carbon dioxide complicates the DeNOx process. Moreover, a mobile SCR system has only a short distance between engine exhaust and the catalyst entrance. Hence, this leads to not enough residence times of urea, and therefore evaporation and thermolysis cannot be completed at the catalyst entrance. This may cause high secondary emissions of Ammonia and isocyanic acid from the reducing agent and also leads to the fact that a considerable section of the catalyst may be misused for the purely thermal steps of water evaporation and thermolysis of urea. Hence the key factor to implementation of SCR technology on automobile is fast thermolysis, good mixing of Ammonia and gas, and reducing Ammonia slip. In this context, this study performs three-dimensional numerical simulation of urea injection of heavy-duty diesel engine under various injection pressure, injector locations and number of injector hole. This study employs Eulerian-Lagrangian approach to consider break-up, evaporation and heat and mass-transfer between droplet and exhaust gas with considering thermolysis and the turbulence dispersion effect of droplet. The SCR-monolith brick has been treated as porous medium. The effect of location and number of hole of urea injector on the uniformity of Ammonia concentration distribution and the amount of water at the entrance of SCR-monolith has been examined in detail under various injection pressures. The present results show useful guidelines for the optimum design of urea injector for reducing Ammonia slip and improving DeNOx performance.

• 폴리머
• /
• 제26권4호
• /
• pp.445-451
• /
• 2002

본 연구에서는 실리카의 표면처리를 위해 실란 커플링제인, ${\gamma}$-methacryloxy propyl trimethoxy silane (MPS), ${\gamma}$-glycidoxy propyl trimethoxy silane (GPS), and ${\gamma}$-mercapto propyl trimethoxy silane (MCPS) 등을 사용하여 실리카 흡착특성과 기계적 계면물성에 대하여 고착하였다. 실란처리에 따른 실리카의 평형 확산압력, 표면 자유에너지, 비표면적을 BET법을 이용한 $N_2$/77 K 기체 흡착을 통하여 알아보았다. 본 실험결과 신란처리에 의해 실리카 표면에 도입된 비극성 관능기로 인해 실리카의 비표면적, 평형 확산압력, 표면 자유에너지의 비극성 요소가 증가하였으며 결과적으로 실리카/고무 복합재료의 기계적 계면 물성인 tearing energy ($G_{mc}$)가 향상되었음을 확인할 수 있었다. 그리고 MPS로 표면처리한 경우가 GPS, MCPS에 비해서 우수한 기계적 계면물성을 나타남을 관찰할 수 있었다.