• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.179-186
• /
• 2017

Technology forecasting is predict future trend and state of technology by analyzing the results so far of developing technology. In general, a patent has novel information about the result of developed technology, because the exclusive right of technology included in patent is protected for a time period by patent law. So many studies on the technology forecasting using patent data analysis has been performed. The patent keyword data widely used in patent analysis consist of occurred frequency of the keyword. In most previous researches, the continuous data analyses such as regression or Box-Jenkins Models were applied to the patent keyword data. But, we have to apply the analytical methods of discrete data for patent keyword analysis because the keyword data is discrete. To solve this problem, we propose a patent analysis methodology using Bayesian Poisson discrete model. To verify the performance of our research, we carry out a case study by analyzing the patent documents applied by Apple until now.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.26-34
• /
• 2019

In this paper, a coarse lunar soil model is developed using discrete element method and its computed physical properties are compared with those of the actual lunar soil for its validation. The surface of the actual moon consists of numerous craters and rocks of various sizes, and it is covered with fine dry soil which seriously affects the landing stability of the lunar lander. Therefore, in consideration of the environment of the lunar regolith, the lunar soil is realized using discrete element method. To validate the coarse model of lunar soil, the simulations of the indentation test and the direct shear test are performed to check the physical properties(indentation depth, cohesion stress, internal friction angle). To examine the performance of the proposed model, the drop simulation of finite element model of single-leg landing gear is performed on proposed soil models with different particle diameters. The impact load delivered to the strut of the lander is compared to test results.

• Steel and Composite Structures
• /
• v.28 no.4
• /
• pp.427-438
• /
• 2018

Static stability is a decisive factor in the design of domes. Stability-related external factors, such as load and supports, are incorporated into structural vulnerability theory by the definition of a relative rate of joint well-formedness ($r_r$). Hence, the instability mechanism of domes can be revealed. To improve stability, an optimization model against instability, which takes the maximization of the lowest $r_r$ ($r_{r,min}$) as the objective and the discrete member sections as the variables, is established with constraints on the design requirements and steel consumption. Optimizations are performed on two real-life Kiewitt-6 model domes with a span of 23.4 m and rise of 11.7 m, which are initially constructed for shaking table collapse test. Well-formedness analyses and stability calculation (via arc-length method) of the models throughout the optimization history demonstrate that this proposed method can effectively enhance $r_{r,min}$ and optimize the static stability of shell-like structures. Additionally, seismic performance of the optimum models subjected to the same earthquake as in the shaking table test is checked. The supplemental simulations prove that the optimum models are superior to the original models under earthquake load as well.

• Transactions of Materials Processing
• /
• v.26 no.1
• /
• pp.18-27
• /
• 2017

A comparative study was performed on strain-compensated Arrhenius-type constitutive models established with two regression methods: polynomial regression and regression Kriging. For measurements at high temperatures, experimental data of 70Cr3Mo steel were adopted from previous research. An Arrhenius-type constitutive model necessitates strain compensation for material constants to account for strain effect. To associate the material constants with strain, we first evaluated them at a set of discrete strains, then capitalized on surrogate modeling to represent the material constants as a function of strain. As a result, disparate flow stress models were formed via the two different regression methods. The constructed constitutive models were examined systematically against measured flow stresses by validation methods. The predicted material constants were found to be quite accurate compared to the actual material constants. However, notable mismatches between measured and predicted flow stresses were revealed by the proposed validation techniques, which carry out validation with not the entire, but a single tensile test case.

• Structural Engineering and Mechanics
• /
• v.74 no.2
• /
• pp.201-214
• /
• 2020

This study aims at evaluating composite moment frame structures (CFS) using wavelet analysis of the displacement behavior of these structures. Five seismic damage mitigation systems' models of 9-story CFS are examined namely, basic (Model 1), reinforced (Model 2), buckling restrained braced (BRB) (Model 3), lead rubber bearing (LRB) (Model 4), and composite (Model 5) moment frames. A novel integration between continuous and discrete wavelet transforms is designed to estimate the wavelet power energy and variance of measurements' behaviors. The behaviors of the designed models are evaluated under influence of four seismic loads to study the dynamic performance of CFS in the frequency domain. The results show the behaviors of models 3 and 5 are lower than other models in terms of displacement and frequency performances. Model 3 has been shown lower performances in terms of energy and variance wavelets along the monitoring time; therefore, Model 3 demonstrates superior performance and low probability of failure under seismic loads. Furthermore, the wavelet variance analysis is shown a powerful tool that can be used to assess the CFS under seismic hazards.

• International Journal of Contents
• /
• v.8 no.2
• /
• pp.19-22
• /
• 2012

New and handoff calls control mechanisms are the key point to wireless cellular networks. In this paper, we present an adaptive algorithm for dynamic channel allocation scheme with guard channels and also with handoff calls waiting queue ensuring that handoff calls take priority over new calls. Our goal is to find better tradeoff between handoffs and new calls blocking probabilities in order to achieve more efficient channel utilization. Simpy is a Python based discrete event simulation system. We use Simpy to build our simulation models to get analytical data.

• Journal of the Korean Statistical Society
• /
• v.23 no.1
• /
• pp.63-78
• /
• 1994

For discrimination with binary variables, reformulated full and first order Bahadur model with incomplete observations are presented. This allows prior probabilities associated with multiple population to be estimated for the sample-based classification rule. The EM algorithm is adopted to provided the maximum likelihood estimates of the parameters of interest. Some experiences with the models are evaluated and discussed.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.624-628
• /
• 2000

이 논문에서는 이산형 상태 공간 모델에서의 새로운 FIR 필터를 제안한다. 선형성, 무진동성, FIR 구조, 초기 조건과의 무관성등을 디자인 과정에서 고려해서 성능 지표를 최소화 하는 필터를 구한다. 성능지표로는 구간에서 외란 에너지와 현재 추정 에러의 최대 이득으로 생각하며, 이 지표는 일반적인 성능지표와는 다르다. 제안된 필터는 배치 형태로 먼저 구하고, 점화식 형태로 바꿀 수 있음을 보인다. 제안한 필터는 확률론적 시스템의 이동 구간 무편향 FIR 필터(RHUFF)와 유사함을 보인다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.276-277
• /
• 2006

Estimation of power system frequency is an important task because frequency deviation is a good indicator of the system abnormal operating conditions. The algorithms, curve fitting, technique using Taylor series, deviation of phasor angle of fundamental waveform using DFT (Discrete Fourier Transform) and Prony method, are tested under operation of the frequency relaying by using EMTP MODELS. The performance of methods is compared with the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.52.1-52
• /
• 2002

Young Sam Lee : He is currently a PhD candidate student. His research interest includes time-delay systems, signal processing, and receding horizon control. Wook Hyun Kwon : His research interest includes time-delay systems, signal processing, receding horizon control, and robust control. He is the president of IFAC 2008 which is to be held in Korea. Soo Hee Han : He is currently a PhD candidate student. His research interest includes time-delay systems, signal processing, receding horizon control, and communication.