• 자원환경지질
• /
• 제49권1호
• /
• pp.31-41
• /
• 2016

본 연구는 절리의 방향분포가 절리성 암반의 수리적 특성에 미치는 영향을 평가하기 위하여 등가파이프 연결구조에 기반을 둔 이차원 DFN(discrete fracture network) 유체유동 해석 프로그램 코드를 개발하고 수치실험을 수행하였다. 수치실험에 사용된 이차원 DFN 시스템은 경계효과를 고려하여 $32m{\times}32m$ 영역의 중앙에서 $20m{\times}20m$ 크기의 DFN 블록이다. 두 절리군을 사용하여 절리의 빈도와 길이분포를 고정하고 절리군 선주향의 평균과 표준편차를 달리하며 추계론적으로 생성한 총 15개의 DFN 블록에 대하여 매 $30^{\circ}$ 간격으로 회전하면서 총 12 방향으로 구현한 총 180개 DFN 블록에서 블록수리전도도가 산정되었다. 또한, 각각의 DFN 블록에서 이론적 블록수리전도도, 주 수리전도도텐서 및 평균블록수리전도도를 추정하여 비교분석한 결과, 절리군의 평균 교차각이 작을수록 절리 방향분포의 변동성이 이차원 DFN 시스템의 등가연속체 취급 가능성 및 블록수리전도 특성에 더욱 영향을 미치는 것으로 평가되었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2018-2030
• /
• 2015

A two stage ac drive configuration consisting of a single-phase line commutated rectifier and a three-phase voltage source inverter (VSI) is very common in low and medium power applications. The deterministic pulse width modulation (PWM) methods like sinusoidal PWM (SPWM) could not be considered as an ideal choice for modern drives since they result mechanical vibration and acoustic noise, and limit the application scope. This is due to the incapability of the deterministic PWM strategies in sprawling the harmonic power. The random PWM (RPWM) approaches could solve this issue by creating continuous harmonic profile instead of discrete clusters of dominant harmonics. Insufficient filtering at dc link results in the amplitude distortion of the input dc voltage to the VSI and has the most significant impact on the spectral errors (difference between theoretical and practical spectra). It is obvious that the sprawling effect of RPWM undoubtedly influenced by input fluctuation and the discrete harmonic clusters may reappear. The influence of dc link fluctuation on harmonics and their spreading effect in the VSI remains invalidated. A case study is done with four different filter capacitor values in this paper and results are compared with the constant dc input operation. This paper also proposes an ingenious RPWM, a ripple dosed sinusoidal reference-random carrier PWM (RDSRRCPWM), which has the innate capacity of suppressing the effect of input fluctuation in the output than the other modern PWM methods. MATLAB based simulation study reveals the fundamental component, total harmonic distortion (THD) and harmonic spread factor (HSF) for various modulation indices. The non-ideal dc link is managed well with the developed RDSRRCPWM applied to the VSI and tested in a proto type VSI using the field programmable gate array (FPGA).

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제28권10호
• /
• pp.699-705
• /
• 2001

최근 PC의 성능이 향상되고 디지털 신호처리 기술이 발달함에 따라 복잡한 계산을 필요로 하는 입체음향처리를 PC 상에서도 구현하는것이 가능하게 되면, 멀티미디어 분야에서 입체음향에 대한 관심이 고조되고 있다. 특히 2 채널 방식의 입체 음향 기술은 공간활용성과 경계성에서 우수하여 많은 연구가 진행되고있다. 2 채널 재생 방식에 있어서 위치음 효과는 비교적 단순한 반면에 이동음 효과는 특정점에서만 측정된 머리전달함수를 이용하여 이동하는 음을 생성해야 하기 때문에 해결해야 할 문제점이 많다. 본 논문에서는 입체음향을 2채널로 재생할 때 이동음 효과가 부드럽게 생성되도록 하는 방법에 대해 다루고자 한다. 특히 부드럽게 궤적을 생성하는 방법, 그리고 이동음의 출력이 이산적인 공간에서 부드럽게 연결되도록 하는 방법에 대해서 제안하고 실제 테스트를 통해서 그 유용성을 보여준다.

• 한국지진공학회논문집
• /
• 제9권2호통권42호
• /
• pp.47-58
• /
• 2005

이산폰툰형 부유식교량의 시간영역 지진응답해석을 지진파의 공간분포를 고려하여 수행하였다. 지반운동의 공간변화는 파의 통과 영향, 엇결성 뎡향 및 국부지반 영향을 반영하는 결맞음 함수 모델로 고려하였다. 부유식 교량의 상부구조는 공간뼈대요소와 탄성현수케이블요소를 이용하여 모델링 하였고, FHWA 가이드라인의 스프링 모델을 사용하여 교대의 지반 구조물 상호작용에 대한 영향을 고려하엿으며, 경계요소법으로 산정한 폰툰 동수력계수의 주파수 의종성을 고려하기 위해서 시간지연함수를 사용하였다. 지반운동의 공간변화를 고려한 다중지점 지진입력을 교량의 양단에 도입하였고 응답의 시간이력을 동시 가진 시와 비교하였다. 장주기의 동적특성을 갖는 이산폰툰형 부유식 교량의 지진응답 해석에서 지반운동의 공간분포를 고려할 경우에 주몰할만한 응답의 증폭이 나타날 수 있음을 확인하였다.

• 소음진동
• /
• 제4권3호
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.891-897
• /
• 2013

The power system frequency plays an important role in monitoring and controlling the power system. The frequency can be measured through discrete Fourier transform (DFT) coefficients of its positive fundamental frequency. The accuracy of the frequency estimate is severely affected by noise in the power system signal and the leakage effect of the negative fundamental frequency in DFT. This paper proposes a DFT-based frequency estimation algorithm to cope with the noise as well as the leakage effect. In this algorithm, two suitable digital filters are introduced to reduce efficiently frequency estimate error due to the noise. These filters are designed to use a digital bandpass filter and a second-degree integrator. The effectiveness of the proposed algorithm in reduction of frequency estimate error is verified through simulations on noise, harmonics and frequency deviation.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 추계학술대회
• /
• pp.38-41
• /
• 1990

A new spline function for resampling discrete signal adaptively is proposed. In general, B-spline function is used for an image interpolation because of its smoothness and continuity, but accompanies a large amount of blurring effect. Hence, we developed a new spline function to remedy this effect, with two procedures ; deblurring of Gaussian blurring and diminishing of aliasing effect caused by deblurring procedure. The proposed function has a parametric expression with $\alpha$ which is related to the variance of Gaussian blurring model. Locally adaptive resampling scheme is obtained by changing a according to statistical characteristics of an image. The proposed, interpolation function shows edge-sharpening effect as well as noise smoothing, with comparison to the conventional schemes.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.105-130
• /
• 2015

In this paper, the classical continuum mechanics is adopted and modified to be consistent with the unique behavior of micro/nano solids. At first, some kinematical principles are discussed to illustrate the effect of the discrete nature of the microstructure of micro/nano solids. The fundamental equations and relations of the modified couple stress theory are derived to illustrate the microstructural effects on nanostructures. Moreover, the effect of the material surface energy is incorporated into the modified continuum theory. Due to the reduced coordination of the surface atoms a residual stress field, namely surface pretension, is generated in the bulk structure of the continuum. The essential kinematical and kinetically relations of nano-continuums are derived and discussed. These essential relations are used to derive a size-dependent model for Mindlin functionally graded (FG) nano-plates. An analytical solution is derived to show the feasibility of the proposed size-dependent model. A parametric study is provided to express the effect of surface parameters and the effect of the microstructure couple stress on the bending behavior of a simply supported FG nano plate.

• 지질공학
• /
• 제29권4호
• /
• pp.383-391
• /
• 2019

Bio-grouting based on microbial-induced calcite precipitation (MICP) is recently emerging as a novel and environmentally friendly technique for improvement of coarse-grained ground. To date, the mechanical behaviour of bio-grouted coarse-grained soil with different calcite contents and grain sizes still remains poorly understood. The primary objective of this study is to investigate the influence of calcite content on the mechanical properties of bio-grouted coarse-grained soil with different grain sizes. This is achieved through an integrated study of uniaxial loading experiments of bio-grouted coarse-grained soil, 3D digitization of the grains in conjunction with discrete element modelling (DEM). In the DEM model, aggregates were represented by clump logic based on the 3D morphology digitization of the typical coarse-grained aggregates while the CaCO₃ was represented by small-sized bonded particle model. The computed stress-strain relations and failure patterns of the bio-grouted coarse-grained soil were validated against the measured results. Both experimental and numerical investigation suggest that aggregate sizes and calcite content significantly influence the mechanical behaviour of bio-cemented aggregates. The strength of the bio-grouted coarse-grained soil increases linearly with calcite content, but decreases non-linearly with the increasing particle size for all calcite contents. The experimental-based DEM approach developed in this study also offers an optional avenue for the exploring of micro-mechanisms contributing to the mechanical response of bio-grouted coarse-grained soils.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.315-327
• /
• 2002

본 연구의 목적은 패널영역을 고려한 2차 탄소성힌지해석을 이용한 평면 강뼈대구조물의 이산화 최적설계알고리즘을 개발하는데 있다. 강뼈대구조물의 일반적인 해석은 구조물의 거동에서 패널영역 변형의 효과를 고려하지 않는다. 최적설계의 목적함수는 강뼈대구조물의 중량을 함수로 취하였으며, 제약조건식은 하중저항계수법(AISC-LRFD1994)시방규정을 근거로 하였다. 강뼈대구조물의 해석에서 현실적인 모델 사용의 중요성을 입증하기 위해 접합부 모델에서 패널영역을 고려하지 않은 수치해석과의 비교로부터 이 모델의 타당성이 판명되어진다. 개발된 알고리즘은 범용 프로그램인 SAP2000의 치적설계결과와 비교하여 본 연구에서 개발된 최적화 알고리즘의 타당성을 입증하였다. 이 연구의 결과는 일반적인 강뼈대구조물의 설계방법보다 패널영역의 거동을 고려한 최적설계 알고리즘이 더 경제적인 설계라는 것을 나타내었다.