• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2003

As a compressed water is rapidly expanded through a nozzle, two-phase flow of vapor and liquid is formed in the nozzle due to the flash evaporation. In the present study, critical flow of two-phase fluids is analysized using an Isentropic-Homogeneous-Equilibrium model and a Leung model. Calculation results show that the choke of the two-phase flow can be two different types of continuous and discontinuous chokings. For the stagnation pressure below 10 Mpa it is found that the continuous choking, which is similar to the choking phenomenon of single-phase gas flow, is possible only when the degree of subcooling is less than 10K.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.43-57
• /
• 1999

The fluid flow and heat transfer in a thin liquid film are investigated numerically. The flow Is assumed to be two-dimensional laminar and surface tension is considered. The most important characteristics of this flow is the existence of a hydraulic jump through which the flow undergoes very sharp and discontinuous change. Arbitrary Lagrangian-Eulerian(ALE) method is used to describe moving free boundary and a modified SIMPLE algorithm based on streamline upwind Petrov-Galerkin(SUPG) finite element method is used for time marching iterative solution. The numerical results obtained by solving unsteady full Navier-Stokes equations are presented for planar and radial flows subject to constant wall temperature or constant wall heat flux, and compared with available experimental data. It Is discussed systematically how the inlet Reynolds and Froude numbers and surface tension affect the formation of a hydraulic jump. In particular, the effect of temperature dependent fluid properties is also discussed.

• Ceramist
• /
• v.23 no.1
• /
• pp.101-109
• /
• 2020

In this study, the phase transition behaviors of lead-free (Na_1/2Bi_1/2TiO₃)_(1-x)-(BaTiO₃)_x (NBT-BT) are investigated by using Brillouin spectroscopy. The elastic properties, sound velocity and absorption coefficient of NBT-BT are characterized as a function of temperature along different crystallographic axes. The temperature dependences of the elastic constants of NBT-BT near the morphotropic phase boundary are determined for the first time. The unpoled NBT-BT single crystals exhibits the typical relaxor behaviors, presenting broad acoustic and dielectric anomalies. The application of electric field induced discontinuous changes in the elastic properties at ~110℃, which indicates field-induced phase transition occurred. The electric field also changes the dielectric constant from more relaxor-like to ferroelectric-like dielectric behavior.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.1
• /
• pp.42-46
• /
• 2012

With the development of industry, more large-scale non-linear loads are added to existing power systems and they cause the serious power quality (PQ) problems to the nearby sensitive installations more and more. To protect the important loads and mitigate the impact of PQ disturbances on them, various compensating devices are installed. One of the most important control skills used in the compensating equipment at the load side is how fast they can recognize or detect the discontinuous abnormal PQ events from the normal voltage signal. This paper deals with two estimation methods for the fast detection and tracking of general PQ disturbances: Teager Energy Operator (TEO), which is a non-linear operator and used for a short time energy calculation, and Kalman Filter (KF), which is one of the most universally used estimation techniques. And it is also shown how to apply the TEO and the KF to detect the PQ disturbances such as voltage sag, swell, interruption, harmonics and voltage fluctuation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.262-275
• /
• 1994

SiC/C functionally gradient materials (FGM) were deposited on the graphite substrate by the chemical vapor deposition method. The best deposition conditions of SiC/C FGM were $1300^{\circ}C, H_2/[SiCl_4+CH_4]=10, CH_4/[$SiCl_4+CH_4]=0.5-0.6$. Despite of discontinuous input gas ratio change, the FGM of which composition was continuously changed could be obtained and continuous structural change without definite interfaces was confirmed by the SEM observation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.211-218
• /
• 2005

Switched Reluctance Motor(SRM) offers the advantages of simple and robust motor construction, high speed and high efficiency over a wide operating range of torque and speed, excellent controllability. However SRM has the disadvantages of high current harmonics, and low power factor because the required output of speed and torque is produced by the discontinuous and loss of power system, and brings about the incorrect operation of electronic system. This paper deals with an energy efficient converter fed SRM system with the reduced harmonics and improved power factor. The validity of the proposed scheme is verified via experiments. We are implemented the proposed control system using 80C196KC micro-controller.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.543-550
• /
• 2000

Rock slopes along the road or railroad are affected by temperature and therefore experienced iterative freezing-thawing process between winter and early spring. The purpose of this study is to analyze the stability of rock slopes which are influenced by the deterioration due to the freezing-thawing. The analysis is the homogenization method which evaluates the strength property of discontinuous rock mass, and as a strength failure criterion, Drucker-Prager failure criterion is used. The deterioration property of real rock is obtained by a freezing-thawing laboratory test of tuff and this property of deterioration is quantitated and used as a basic data of stability analysis for rock mass. To evaluate the deterioration depth due to the freezing-thawing in situ rock slope, one dimensional heat conductivity equation is used and as the result I can find that the depth of which is affected by a temperature. After the freezing-thawing depth of model slope is determined, we analyze the pattern of rock mass stength value of rock slope model which excesses the limit of self-load.

• Journal of Families and Better Life
• /
• v.25 no.3 s.87
• /
• pp.151-168
• /
• 2007

The purpose of this study was to investigate the causal relationship of kindergarteners' alphabet knowledge to their ability to read words, in connection with the features of the Korean alphabet 'Hangul'. A total of 289 children aged four to six from three kindergartens in Busan participated in the study. The main results are as follows. To begin with, the participants showed continuous development in the knowledge of consonant names, vowel sounds, the vowel stroke-adding principle, and the alphabet composition principle. Meanwhile, discontinuous development was found in the knowledge of consonant sounds and the consonant stroke-adding principle, which indicated that kindergartners could show differential speed in various sub-skills of literacy development. The kindergartners' naming of consonants developed before their recall of consonant sounds, and the knowledge of consonant sounds had an effect on the knowledge of vowel sounds. Children had difficulty in treating more complicated letters of the alphabet stroke-adding principle test, and eve syllables of the alphabet composition principle test. Most importantly, the children's alphabet knowledge was strongly related to their ability to read words written in Hangul, as kindergarteners with a greater knowledge of alphabet names, sounds, and principles were shown to read words better.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.691-699
• /
• 2004

SRM(Switched Reluctance Motor) drives require the accurate position information of the rotor. These informations are generally provided by a tacho generator or digital shaft-position encoder These speed sensors lower the system reliability and require special attention to noise. This paper describes a new approach to estimating SRM speed from measured terminal voltages and currents for speed sensorless control. The described method is based on the sliding mode observer. The rotor speed and position observers are estimated by the adaptation law using the real and estimated currents. However, the conventional adaptive sliding mode observer based on the variable structure control theory has some disadvantages that the estimated values including the high-frequency chattering and the steady state error generated due to the infinite feedback gain chosen and the discontinuous control input. To reduce the chattering and steady state error, an integrator is also inserted in the sliding mode observer strategy. The described adaptive sliding mode observer decreases the vibration to the switching hyper-plane of the sliding mode by adding integrator. The described methodology incorporates the Lyapunov algorithm to drive the rotor speed and the stator resistance such that it can overcome the problem of sensitivity in the face of SRM parameter variation. Also, without any mechanical information. The rotor speed of SRM is obtained form adaptive scheme. The described method is verified through the simulation and experiment.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.2
• /
• pp.29-32
• /
• 1998

When rendering polyhedral models, normal vectors at polygon vertices are necessary for smooth shading. The most commonly used technique of approximating a vertex normal vector by averaging normal vectors of faces around the vertex yields, however, different results on different tessellations Further, continuous deformation of models may cause abrupt discontinuous changes in normal vector directions. In this paper, a variation of the above technique is proposed to avoid these problems. Specifically, it uses a weighted average of normal vectors of faces around the vertex, where the weight of a face being the angular span of the two edges incident on the vertex.