• Applied Microscopy
• /
• v.31 no.4
• /
• pp.367-374
• /
• 2001

Leaves of two developmental stages of Salsola species, young and mature, were examined to reveal the structural and functional relationships in the photosynthetic tissue using anatomical and ultrastructural criteria. Both young and mature leaves had Kranz anatomy of the Salsolid type with two layers of chlorenchyma on the leaf periphery: an outer layer of palisade mesophyll cells and an inner layer of compact bundle sheath cells with centripetally arranged organelles. The chlorenchyma was continuous in young leaves , while it was discontinuous in mature leaves. The main vascular bundle occupied the central position in the leaf. but the small peripheral vascular bundles were in contact with the chlorenchyma. Structural dimorphism of chloroplasts was obvious in bundle sheath cells of mature leaves exhibiting noticeable grana reduction, whereas mesophyll cell chloroplasts had well developed grana in all cases. Plasmodesmata were less numerous and rather simple in young leaves relative to well-developed secondary plasmodesmata of the later stage. According to the current data, features of two stages of Salsola leaves corresponded to NADP-ME bio-chemical subtype on the basis of photosynthetic cell ultrastructure. Implications of developing such anatomical and ultrastructural data of Sulsola species and biochemical characteristics reported in other C-4 species have been discussed.

• Korean Journal of Animal Reproduction
• /
• v.12 no.3
• /
• pp.141-147
• /
• 1988

These experiments were carried out to develop new techniques for in vitro separation of x-and Y-bearing spermatozoa. The results obtained in these experiments were summarized as follows: 1. Following centrifugation of discontinuous percoll density gradient, populatin of spermatozoa increased progressively from low to high density. The highest concentration of spermatozoa was observed at the 4th fraction which included 36.6% of spermatozoa. 2. As increasing percoll concentration, the higher motility index was obtained and the highest motility index(74.2) was obtained at the 5th fraction. 3. The percentage of B-body bearing spermatozoa following percoll density gradient centrifugation was decreased from 39.7% to 25.6%. 4. The sperm population following chromatography by sephadex gel and percoll density gradient centrifugation was decreased in 1st, 5th and 6th fractions but the reverse was turn for 2nd, 3rd and 7th fractions, and the highest sperm concentration was observed at the 7th fraction which included 37.4% of spermatozoa. 5. Motility index of spermatozoa was increased from 77.6 to 79.4 after the sephadex gel filtration, however it was decreased at all fractions after percoll density gradient centrifugation. The lowest motility index(33.2) was obtained from the 7th fraction. 6. The rate of B-body bearing spermatozoa was shown the trend to decrease by the sephadex gel filtration and the trend was accelerated by the percoll density gradient centrifugation. The lowest percentage of B-body bearing spermatozoa, 12.0% was obtained from the 5th fraction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.316-329
• /
• 1983

The formation and structure of the shelf front in the eastern part of the Yellow Sea are studied on the basis of oceanographic data collected in August, 1982 and February, 1983. This paper also describes the distribution of planktonic organisms of the shelf front. In summer the shelf front is formed in the area ($126^{\circ}02^'E-126^{\circ}05^'E$) ca. 20 miles from the shore at the depths of 15-25 m. in winter, however, no distinct shelf front is formed. Based on the cluster analysis of surface phytoplankton the species composition shaws a discontinuous pattern in the vicinity of the shelf front in summer, 1982. A similar trend is observed in distribution of some copepod species in winter, l983.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.135-140
• /
• 2006

In the experimental study of $N_2$ purge cold flow test of impinging(FOOF) injector for determining of instability region, the whistling sound which has a specific frequency is generated. The frequency of whistling is proportional to the gas flow velocity in part of the oxidizer orifice and due to the coupling of the vibrating gas column and the natural frequency of pipe-orifice shape, the discontinuous jumping phenomena arises. The whistling phenomena have no effect on the combustion instability. Compared the damping factor of 1T1L mode with the hot fire test, the instability region of $N_2$ purge cold flow test is very much like that. It means that flow instability by impinging or mixing of jet is the main reason of combustion instability of impinging injector(FOOF) in the hot firing test.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.129-142
• /
• 2016

The underground cavity known as one of the reasons of ground surface settlement is a discontinuous character. Therefore, it is limited to analyze with continuum analysis. In this research, The spherical underground cavity affecting the ground surface settlement is studied with Discrete Element Method. Ground properties, depth and diameter of the spherical underground cavity are chosen as factors of the spherical underground cavity and the effect of the each factor variations on the ground surface settlement is analyzed. Relative depth to the diameter of the spherical underground cavity is also studied. The result of the research suggests the basis of underground cavity collapse prediction and standard of support.

• Geomechanics and Engineering
• /
• v.14 no.5
• /
• pp.421-428
• /
• 2018

In deep mining, the lateral deformation of strip coal pillar appears to be a new characteristic. In order to study the lateral deformation of coal-mass, a monitoring method and monitoring instrument were designed to investigate the lateral deformation of strip coal pillar in Tangkou Coalmine with the mining depth of over 1000 m. Because of without influence of repeated mining, the bedding sandstone roof is easy to break and the angle between maximum horizontal stress and the roadway is small, the maximum lateral deformation is only about 287 mm lower than the other pillars in the same coalmine. In deep mining, the energy accumulation and release cause a discontinuous damage in the heterogeneous coal-mass, and the lateral deformation of coal pillar shows discontinuity, step and mutation characters. These coal-masses not only show a higher plasticity but also the high brittleness at the same time, and its burst tendency is more obvious. According to the monitoring results and theoretical calculations, the yield zone of the coal pillar width is determined as 15.6 m. The monitoring results presented through this study are of great significance to the stability analysis and design of coal pillar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.314-319
• /
• 2005

To compare two different schemes, continuous scheme (CS) and discontinuous scheme (DCS), of once-weekly ovum pick up (OPU) with ultrasound-guided follicular puncture technique, Holstein heifers were randomly divided into two groups of five. After characterization of their two normal estrous cycles, the heifers were subjected to consecutive 20 weeks of once-weekly OPU under two schemes: the CS (one week interval between continuous OPU, total 100 OPU sessions performed) and the DCS (OPU fixed to the day 3 and day 10 of each estrus). Then, the status of ovaries and artificial insemination results were observed. On oocyte yield, the total number of punctured follicles using DCS was lower than that using CS, but the mean numbers of punctured follicles and recovered oocytes per session were higher in DCS than CS group. So the total number of recovered oocytes was similar in both groups. There were also no differences in the quality of recovered oocytes, nor in the developmental ability of oocytes fertilized in vitro between groups. The heifers in the DCS group showed regular estrous cycles with stable estrous signs through the periods of before, during, and after OPU, while those in CS group showed longer estrous cycles and less estrous signs during and/or after OPU compared with before period. Furthermore, the mean number of inseminations required for obtaining pregnancy after completion of the experiments was lower in DCS than CS group. The research demonstrates that similar quantity and quality oocytes can be achieved, and the side effects on donors are lower in DCS that needs fewer OPUs than CS group, and DCS is superior to CS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.758-761
• /
• 2007

Digital signal processing technique is applied in wide fields such as speech processing, image processing and spectrum analysis. Therefore, in order to do frequency selective operation digital filter is used in stead of analog filter and sharp filter characteristics can be implemented. Since finite impulse response (FIR) digital filter as nonrecursive type represents linear phase response characteristics and is always stable and is used in fields regarding wave information importantly such as data transmission. And due to frequency characteristics, in order to remove the Gibbs phenomenon generating around a discontinuous point, filter is designed through window function method. Therefore, in this paper to improve performance of FIR digital filter, a modified window function was applied. And the proposed method was compared with conventional methods using peak side-lobe and transition properties in simulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.3
• /
• pp.120-125
• /
• 2002

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. In the switching-mode power converter, the output voltage is generally controlled by varying the duty ratio of main switch. When a converter operates in steady state, duty ratio of the converter is kept constant. So the power of switching noise is concentrated in specific frequencies. Generally, to reduce the EMI and improve the immunity of converter system, the switching frequency of converter needs to be properly modulated during a rectified line period instead of being kept constant. Random Pulse Width Modulation (RPWM) is performed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300V/1kW with 5%~30% white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• Tunnel and Underground Space
• /
• v.21 no.2
• /
• pp.138-144
• /
• 2011

Mine closure does often accompany the flooding of mine galleries due to ceasing a pumping operation. When a mine gallery is flooded, rocks around the gallery are fully saturated and the gallery is subject to a water pressure. The uniaxial unconfined compressive strength of a rock depends on its water content and decreases as the water content increases. A water pressure may originate the crack growth of a rock or the discontinuity growth of rock mass. Although the water in a gallery will give some support pressure inside the gallery, the degradation of rock mass properties caused by a water pressure will reduce the stability of the gallery. In this study, 2-dimensional discontinuous and 3-dimensional continuous numerical analyses have been conducted to evaluate an effect that a reduction of rock mass properties around the gallery induced by a water pressure has on the stability of mine gallery. The numerical analyses show that a reduction of rock mass properties caused by a water pressure increases displacements of rock mass around mine gallery. 2-dimensional model is found to give larger values of displacement than 3-dimensional model.