• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.636-640
• /
• 2000

A novel integrated battery charger/discharger converter for a standardized battery module is proposed. Instead of using separate charger and discharger converters. it integrates these two converters into a single converter in order to minimize the size. the integrated charger/discharger converter not only regulates the solar array output power including the peak power tracking capability but also controls the battery charging/discharging current depending on the solar array output power and the load power. In addition it offers a regulated bus voltage which simplifies the power distribution/conversion for the pay load.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.625-630
• /
• 2005

In this paper, several energy recovery circuits (ERC) for the plasma display panel (PDP) are reviewed and classified in a manner of operation characteristics. A typical ERC using the Regenerative Transformer (RT) is introduced and compared with conventional ones. RT-ERC can achieve zero-voltage-switching (ZVS) for main full-bridge switches and zero-current-switching (ZCS) for the resonant switches and diodes. The charging/discharging energy of panel capacitance is efficiently recovered with the RT and without a sub-circuit. The presented circuit is verified with simulation and experimental results.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.45-48
• /
• 2003

Ramp-rate limitation is a serious obstacle for successful operation of fast charging and discharging magnet Ramp-rate limitation is hard to expect or fully investigate due to its electric and thermo-hydraulics couplings. In this paper, the simplest case of ramp-rate limitation is investigated with two-strand superconducting cable model considering transient heat transfer The simulation results are compared with the experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.932-939
• /
• 2012

This paper presents an equivalent circuit model of a LIPB (Li-Ion Polymer battery) for Hybrid Electric Vehicles (HEVs). The proposed equivalent circuit can be used to predict the charging/discharging characteristics in time domain as well as the impedance characteristic analysis in frequency domain. Based on these features, a one-cell model is established as a function of Depth of Discharge (DoD), and a 48-cell model for a battery pack was also established. It was confirmed by experiment that the proposed model predict the discharging and impedance (AC) characteristics quite accurately at different constant current levels. To check the usefulness of the proposed circuit, the model was used to simulate a motor driving circuit with an Insulated Gate Bipolar Transistor (IGBT) inverter and Brushless DC (BLDC) motor, and it is confirmed that the model can calculate the battery voltage fluctuation in time domain at different DoDs.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.82-90
• /
• 2015

This paper proposes an efficient bi-directional DC/DC converter topology using multi-phase interleaved method for power storage system. The proposed converter topology is used for a power storage system using a vanadium redox flow battery(VRFB) and is configured to enable bidirectional power flow for charging and discharging of VRFB. Proposed DC/DC converter of the 4 leg method is reduced to 1/4 times the rating of the reactor and the power semiconductor device so can be reduce the system size. Also, proposed topology is obtained the effect of four times the switching frequency as compared to the conventional converter in each leg with a 90 degree phase shift 4 leg method. This can suppress the reduction of the life of the secondary battery because it is possible to reduce the current ripple in accordance with the charging and discharging of VRFB and may increase the efficiency of the entire system. In this paper, it proposed bidirectional high-efficiency DC/DC converter topology Using multi-phase interleaved method and proved the validity through simulations and experiments.

• 수산경영론집
• /
• 제53권2호
• /
• pp.58-72
• /
• 2022

Fishery products play an important role in Korean food culture, and awareness of the safety of fishery products is increasing in the seafood market. Against this backdrop, Japan has announced a plan to release radioactive water to the sea from 2023. In the case of Korea, it is adjacent to the area to be discharged, so there are concerns about securing the safety of marine products. Therefore, it is necessary to analyze the change in perception and impact of marine product consumers due to the discharge of contaminated water and to study appropriate countermeasures when discharging contaminated water from nuclear power plants. In this study, the current status of radioactive contaminated water discharge in Japan was summarized, and a survey was conducted on the change in the consumption perception of marine products according to the discharge of contaminated water to analyze the factors affecting the consumption change of domestic consumers. According to the survey, 85.3% of the respondents said that it will affect the purchase of domestic marine products if Japan starts discharging contaminated water from nuclear power plants. Moreover, 85.5% of the respondents said it will affect the purchase of imported marine products.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.49-55
• /
• 2022

The design of a battery package and a BMS module for applications using seawater rechargeable batteries, which are known as next-generation energy storage devices, is proposed herein. Seawater rechargeable batteries, which are currently in the initial stage of research, comprise primarily components such as anode and cathode materials. Their application is challenging owing to their low charge capacity and limited charge/discharge voltage and current. Therefore, we design a method for packaging multiple cells and a BMS module for the safe charging and discharging of seawater rechargeable batteries. In addition, a prototype seawater rechargeable battery package and BMS module are manufactured, and their performances are verified by evaluating the prevention of overcharge, overdischarge, overcurrent, and short circuit during charging and discharging.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.679-685
• /
• 2008

This paper describes the degraded properties of between the charge and discharge current for ${\gamma}$-ray irradiated in electric power cable rubbers using in nuclear power generating station. The charge and discharge current of degradation in EPR(Ethylene Propylene Rubber), which were irradiated with the radiant capacity of 0.033 Mrad/h, have been measured in order to investigate the influence of the atmosphere(in amount of reinforcing agent, moisture absorption and heat treatment) on electrical properties. When ${\gamma}$-ray were irradiated on the EPR with more reinforcing agent from 4 to 40 Phr, charge and discharge currents was increase due to the amount of reinforcing agent. It was verified that the discharging and charging currents irradiated by ${\gamma}$-ray were higher than those that was not irradiated. The amount of the degraded current was more after moisture absorption than before moisture absorption. The charge and discharge current after heat treatment was similar to that of before heat treatment and it was decreased with the time elapsed. As these properties related with ${\gamma}$-ray irradiation dose, it is suggested that these properties can be utilized as a index of irradiation degradation.

• 전기전자학회논문지
• /
• 제13권1호
• /
• pp.49-56
• /
• 2009

본 논문에서는 철도 시스템에 에너지 저장장치를 도입하여 충 방전을 통한 가선전압의 안정화와 회생에너지의 효율적인 사용을 모의하였다. 이를 위해 간단한 철도 모델과 적절한 제어기법을 제시하였다. 가선전압의 영역을 제어가 필요한 두 영역과 정상운전 영역으로 구분하여 전압제어를 하고, 슈퍼커패시터의 전류제한을 충족시키기 위하여 전류제어를 병행하였다. 이를 바탕으로 에너지의 저장, 방출을 시뮬레이션을 통하여 확인하였고, 철도의 운전 상태에 따라 에너지 충 방전을 통한 에너지 효율을 살펴보았다.

• 항공우주기술
• /
• 제9권2호
• /
• pp.176-184
• /
• 2010

지구 저궤도 위성의 임무 운용 시 전력 시스템을 안전하고 운용하고 에너지 균형을 만족하는 임무를 설계하기 위해 계획된 임무에 대한 전력 파라미터를 예측해야 한다. 이 논문에서는 다양한 미션 프로파일에 대해 위성의 생성 전력, 소모 전력, 배터리 방전 정도(Depth of Discharge, 이하 DoD), 버스 전압, 충/방전 전류 등을 예측함으로써 미션의 유효성 및 에너지 균형을 검증하기 위한 전력 시뮬레이터를 제안한다. 제안된 전력 시뮬레이터에는 인공위성의 생성 전력을 모사하기 위해 태양전지판(Solar Array, 이하 SA)의 모델, SAR (Solar Array Regulator)의 3가지 동작 모드를 구현하였다. 또한 소모 전력을 모사하기 위해 버스 및 탑재체의 각 유닛 별 소모 전력, Unit on/off configuration, 탑재체 운용 모드 등을 고려하였다. 버스 전압 및 충/방전 전류를 예측하기 위해 배터리 및 주변 회로를 모델링하고 임의의 DoD, 충방전 전류에 대해 배터리 전압 및 버스 전압을 예측한다. 구현된 전력 시뮬레이터를 이용해 에너지 균형을 분석하고 임무 계획의 적합성을 쉽게 판단할 수 있다.