• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.1-8
• /
• 2016

유가의 상승과 환경의 문제로 차량중량의 감소에 의한 차량연비를 개선하기 위하여 가연물인 플라스틱과 직물 등의 사용이 획기적으로 증대되어 주차장에서 화재가 발생하면 2000년대 중반 이전에는 한 두 대가 연소되고 마는 것과는 달리 주차된 차량 전체가 연소하는 화재가 많이 발생하였다. 본 연구에서 차량에 사용되는 플라스틱 등 가연물의 량을 확인한 결과 한 대에 316.2 kg으로 차량 전체무게 1935 kg 대비 16.34%가 되어 과거대비 10배 이상의 증가가 있었다. 또한 주차장의 소화설비로 스프링클러를 설치 시 물분무설비의 원래 성능대로 살수밀도를 $20lpm/m^2$를 사용할 것과 필로티 주차장에 호스릴이산화탄소소화설비 대신 적응성이 있는 포, 분말, 강화액 설비를 사용할 것을 요구하였다.

• 한국언론정보학보
• /
• 제59권
• /
• pp.71-91
• /
• 2012

송건호는 기자들을 대상으로 한 설문조사에서 '가장 존경하는 인물'로 선정된 바 있다. 송건호는 언론인으로 활동하며 언론이 정권의 탄압에 굴복하고, 정권의 특혜를 받으며 기업화되는 과정을 직접 경험했다. 그는 1975년에 "동아일보"가 정권의 탄압에 굴복해 기자들을 대량 해고하자 책임감을 느끼고 신문사를 퇴직했다. 그 후 그는 권력과 자본에 종속된 언론에 대해 더욱 예리한 비판을 가했다. 송건호 언론사상의 핵심은 언론이 권력과 자본으로부터 독립해 민족주의와 민주주의에 기여해야 한다는 것이다. 또한 그는 언론인이 기능인과 같은 역할만을 하는 것을 넘어서서 역사의식과 사회과학적 지식을 갖추고 활동해야 한다고 주장했다. 그의 언론사상은 또 다시 언론의 독립이 위태롭고 언론인의 기능인화가 드러나는 현재의 언론 현실에서도 여전히 유효하다. 그의 언론활동과 언론사상을 살펴보는 것은 미디어 환경의 변화 속에서 언론의 올바른 역할과 언론인의 바람직한 자세를 모색하는 데 도움을 줄 수 있을 것이다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권4호
• /
• pp.196-200
• /
• 2016

We have developed new electrostatic discharge (ESD) protection devices with, bidirectional flip chip transient voltage suppression. The devices differ in their epitaxial (epi) layers, which were grown by reduced pressure chemical vapor deposition (RPCVD). Their ESD properties were characterized using current-voltage (I-V), capacitance-voltage (C-V) measurement, and ESD analysis, including IEC61000-4-2, surge, and transmission line pulse (TLP) methods. Two BD-FCTVS diodes consisting of either a thick (12 μm) or thin (6 μm), n-Si epi layer showed the same reverse voltage of 8 V, very small reverse current level, and symmetric I-V and C-V curves. The damage found near the corner of the metal pads indicates that the size and shape of the radius governs their failure modes. The BD-FCTVS device made with a thin n- epi layer showed better performance than that made with a thick one in terms of enhancement of the features of ESD robustness, reliability, and protection capability. Therefore, this works confirms that the optimization of device parameters in conjunction with the doping concentration and thickness of epi layers be used to achieve high performance ESD properties.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.57-63
• /
• 2012

현대건축물의 고층화는 소화설비의 적용을 어렵게 하여 기존 방식으로는 소화설비의 적합한 기능 부여에 한계가 따르기도 한다. 그중에서 옥내소화전설비는 건축물에 많이 설치된 소화설비로서 화재 시 관계인이 밸브조작 및 호스와 노즐을 수동으로 사용해야하는 설비이다. 따라서 방수압력이 높은 경우 반동력이 커 옥내소화전설비 사용의 어려움과 호스의 파손 등의 문제가 발생할 수 있다. 이를 방지하기위해 사용되는 감압방식 중 옥내소화전방수구인 앵글밸브에 감압밸브를 부착하여 사용하는 경우가 많은데, 고층건축물인 경우 감압밸브의 설치에도 불구하고 방수압력이 높아 안정적인 사용이 어려운 경우가 발생한다. 이를 확인하기위해 오리피스의 직경에 따른 감압성능을 측정하여 이를 근거로 반동력을 산출하였다. 이의 결과로 고층과 같이 높은 압력이 요구되는 상황에서 안정된 감압을 위해서는 다양한 직경의 감압밸브의 생산이 요구된다는 것을 알 수 있었다.

• 에너지공학
• /
• 제7권2호
• /
• pp.202-208
• /
• 1998

원자력 발전소의 증기방출계통에는 상당수의 산업공정에서 보여지는 바와 같이 배관을 통해 응축성 기체를 침수 분사시켜 응축시키는 과정이 포함된다. 본 연구에서는 증기방출계통 파이프와 지지문의 설계에 사용되는 동적 하중을 계산하기 위하여 증기방출 과도현상에 대한 해석을 특성기법을 사용하여 수행하였다. 해석모델은 마찰이 존재하는 균일한 배관을 통해 증기가 수조로 방출되는 경우에 대하여, 증기유량 및 배관 내에 원래 존재하고 있는 공기와 물의 방출유량 등을 고려하였고 압력 및 열원, 밸브, 분지관 등을 포함하였다. 배관의 유동 특성과 동적 하중을 계통 압력, 배관 길이 및 침수 깊이의 변화에 따라 계산하였다. 계산 결과 공기와 물의 경계에서의 배관의 동적 하중, 배관 내의 물 제거 시간 및 물 이동 속도 등은 계통 압력뿐만 아니라 배관 길이 및 침수 깊이의 영향을 받는 것으로 확인되었다.

• Clinical and Experimental Reproductive Medicine
• /
• 제10권1호
• /
• pp.25-37
• /
• 1983

A group of 180 men who visited Urology Department of Severance hospital, including 115 patients with nongonococcal urethritis (N.G.U.), 27 patients with prostatitis, 13 patients with gonococcal urethritis (G.U.) and 25 healthy medical student controls were investigated for the isolation of Ureaplasma urealyticum (T-strain mycoplasma) from the specimen of ureaplasma discharge, urine and semen. Taylor-Robinson media of T-broth and T-agar was used for the isolation of Ureaplasma urealyticum. To the best of our knowledge, the study on the culture of Ureaplasma urealy ticum was reported for the first time in Korea. The followis g results were obtained: 1. The isolation rate of Ureaplasma urealyticum in nongonococcal urethritis (53.0%) revealed highest of those in the other three groups of prostatitis, gonococcal urethritis and control (40.7%,38.4% and 16.0% respectively). 2. As for the specimens, urethral discharge revelaed higher isolation rate of Ureaplasma urealyticum (54.6%) than first voided urine (50.0%). 3. The more consorts patients had, the higher positive culture rate of Ureaplasma urealyticum were revealed. The isolation rate in case of more than one causal in nongonococcal urethritis (27.8%) revealed much higher than in case of marital only (5.2%), one regular (6.1%) and one causal 03.9%). 4. 2.6% of isolation rate of Ureaplasma urealyticum revealed in patients with nongonococcal urethritis who visited the clinic in later than 4 weeks after the symptoms developed. However, the isolation rate in patients who visited within 4 weeks revealed 50.3%. The lower isolation rate of Ureaplasma in the late treatment seekers might be probably due to the suppression effect against Ureaplama urealyticum from the possible previous self antibiotic treatment. 5. Attachment of Ureaplasma urealyticum mostly to the neck and head portion of the spermatozoa seemed to playa role to affect the motility of sperms.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.24-29
• /
• 2005

An experimental study was presented for extinguishing characteristics of liquid fuel fire by water mist($Dv_{0.99}{\leq}200{\mu}m$) containing potassium acetate and sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing additives, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space. During the experiments, flame temperatures were measured, and concentrations of oxygen and carbon monoxide were analyzed by a combustion gas analyzer. The average evaporation rate of water droplet containing additives was lower than that of pure water at a given surface temperature and decreased with the concentration increase due to the precipitation of salt in the liquid-film and change of surface tension. In case of using additives, the fire extinguishing times was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium or sodium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4 MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• 설비공학논문집
• /
• 제25권7호
• /
• pp.371-376
• /
• 2013

Recently, many studies related to reducing the energy consumption in data centers have been conducted. These studies have mainly focused on the air intake and exhaust system of a computer room air handling unit (CRAH) in the server room, diffuser type, suppression and discharge of the heat generated from the server, and the air-side economizer system. In this study, the energy consumption of the conventional central chilled water cooling system is compared with the energy consumption of the air-side economizer system. We also examined how changes of differential pressure by each filter have influenced energy consumption, using the power usage effectiveness (PUE). Results show that the PUE was improved, and energy consumption decreased, by applying the air-side economizer system.

• 한국분말재료학회지
• /
• 제13권6호
• /
• pp.408-414
• /
• 2006

[ $MoSi_2$ ] alloys with Al, B or Nb were prepared by an advanced consolidation process that combined mechanical alloying with pulse discharge sintering (complex forming) to improve the mechanical properties. Their microstructure and mechanical properties were investigated. The $MoSi_2$ alloys fabricated by complex forming method showed very fine microstructure when compared with the sample sintered from commercial $MoSi_2$ powders. Alloys made from powders milled in Ar gas had fewer silica or alumina phases as compared to their counterparts sintered from powders milled in air. In densification of the sintered body, addition of B was more effective than Al or Nb. Both Victors hardness and tensile test indicated that the alloy fabricated by the complex forming method showed better properties than the sample sintered from commercial $MoSi_2$ powders. The Al added alloy sintered from the powders milled in air had the superior mechanical properties due to the suppression of $SiO_2$ and formation of fine $Al_2O_3$ particles.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.