• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.504-512
• /
• 2003

The plastic strain ratios(R-values) of low carbon steel sheets were determined by the automatic strain measurement method using two extensometers, the indirect photo method for the same tensile specimen during tensile test and the indirect method for the specimen after tensile test. The experimental results showed that the measured plastic strain ratios from the automatic strain measurement method using two extensometers coincided with those from the indirect photo method and the indirect method for all tensile specimens. In addition, the strain dependence of plastic strain ratios could be continuously recorded and the anisotropy of the strength coefficient, K, and strain hardening exponent, n, could be automatically calculated in three directions by computer through the use of two extensometers. The experimental results showed that the strain dependence of R-value was related to the anisotropy of strain hardening exponent in low carbon steel sheets.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.38-43
• /
• 2021

Photocurable hydrogels are widely used as 3D printing materials in tissue engineering (e.g., scaffold fabrication) as well as optical fibers (or optical sensors) materials. Photocurable hydrogels can control optical and mechanical properties such as chemical or fabrication conditions. In previous research, we introduced a new 3D printing method to fabricate a freestanding overhanging hydrogel structure without supporting structure. This study was measured and analyzed the difference of the mechanical properties of the photocurable hydrogel according to the light intensity using a micro tensile tester. In practically, it was difficult to perform a direct tensile test on a micro (less than 1 mm) size fiber. In this study, the tensile test of the hydrogel fibers could be measured simply and repeatedly using a paper carrier.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.8-15
• /
• 2020

The diffusion cell method is the main technique employed for the in vitro diffusion test of transdermal drug delivery preparations. Most existing transdermal diffusion devices use a water bath heating structure and direct current motor magnetic stirrer. However, these devices are confronted with problems, such as large volume, incompatible vertical and horizontal diffusion cells, few diffusion cell sets, and poor reliability. To overcome these deficiencies, the system adopts a dry heating method and uses a rotating magnetic field generated by the electromagnetic stirrer to drive the magnetic stirrer. Accordingly, the resulting device is characterized by a simple structure and small volume, convenient operation, compatible vertical and horizontal diffusion cells, and numerous diffusion cell sets. The reliability and practicability of the system is verified by the in vitro percutaneous permeability test of the bisoprolol patch.

• International Journal of Computer Science & Network Security
• /
• v.21 no.5
• /
• pp.192-198
• /
• 2021

Trustless, depression, happiness is a normal human emotion that everyone experiences at times. People face problems and hard circumstances every day due to an environment, social life, or traumatic developments in their lives. This study focused on a particular type of inconsistency patterns of behavior that experiences' students during the school time. Some students find depression interferes with their learning and test taking to such an extent that their grades are seriously affected. This study examined the awareness and readiness of a sample of Saudi Arabian high school teachers to recognize, understand, and respond to the ways in which students may respond to testing situations with depression. Findings suggest teachers learn from experience to use both direct and indirect ways to identify students with depression; employ test preparation and test taking strategies to help students reduce depression; and reach out to parents for additional assistance where teacher strategies are not sufficient.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.1
• /
• pp.55-81
• /
• 2000

This study examined nursing care in a Newborn Intensive Care Unit (NICU) by reviewing nursing activities for the newborns. Through direct observation, time used for nursing care according to the nursing activity, shift, day of the week, and position of the nurses was measured. This study was done on November 15, 21, 24, 1999 at a university medical center hospital and included eight nurses and 179 newborns as the study subjects. The data were collected from the medical records, and by using a nursing activity record for the NICU, and a nursing activity time record for the NICU. The first step in the data collection process was to develop a list of nursing activities which was done through a literature review, examination of medical affairs and duty records. Content validity was measured by a panel of three professors who were experienced clinicians. In the second step two pre-training sessions were held with three sophomore student nurses who then measured the time for each nursing activity using a stopwatch. The data were analyzed using frequencies for nursing activities, averages, percentages and ANOVA for differences between shift and between days of the week, and percentages and t-test for differences according to position of the nurse. The results are as follows: 1) The total number of activities was 156, direct or indirect nursing activities. Direct nursing activity classified according to physical, educational, emotional/social/economic/spiritual needs. There were 109 direct nursing activities in 16 fields. 2) The order of nursing activities, according to time required, was record keeping, nutritional care, measurement/observation, medication, hygiene care, examination and specimen collection, and checking supplies, and according to frequency, measurement/ examination, record keeping, nutrition care, hygiene care, elimination care and medication. 3) According to shift, direct care during the night shift at 313.4 minutes was the longest time and indirect nursing care during the night shift at 252.2 minutes was the highest time. 4) For days of the week, Monday had the highest time for direct care 275.8 minutes (34.6%) and Wednessday had the highest time for indirect nursing care 269.6 minutes (36.1%). 5) For nursing time according to position of nurse, general nurses had the highest for direct care (330.7 minutes), nurse managers for indirect nursing activities (239.0 minutes) and general nurses for individual private time (63.9 minutes). The results of this study show that the major nursing time consuming activities included record keeping, nutrition care and measurement/examination. For newborns, time needs to be allowed for care to be sensitive, sophisticated and specialized rather than concentrated on indirect nursing tasks such as record keeping. Therefore, it is imperative to develop computerized systems that support a systematic approach to record keeping which is more efficient. Moreover, nursing needs according to shift, day or position of nurse can be utilized in assessing nursing resources through a computerized process.

• Journal of Korean Academy of Nursing Administration
• /
• v.12 no.1
• /
• pp.63-75
• /
• 2006

Purpose: This study was aimed to specify roles of nurses from the anesthesia and recovery room by analyzing nursing activities as well as anesthesia nursing during surgery. Method: The objects were 12 RNs working in the recovery room of a university hospital located in Incheon. Self-report was performed by measuring stop-watch for five days from May 17th to May 21st in 2004. Research method was designed to record the time and frequency of the nursing activity from anesthesia and recovery room based on nurses' statement and other references for five days. The data were analyzed with descriptive statistics, ANOVA, and t-test via SPSS Win 10.0 program. Result: Nursing activities in anesthesia recovery room were classified into two different characteristics such as direct and indirect nursing activity. The activities consisted of 11 direct nursing areas and 39 nursing activities in anesthesia preparation room. The indirect nursing was classified into 8 nursing areas and 32 nursing activities. The direct nursing was classified into 12 nursing areas and 55 nursing activity. Also, the indirect nursing was classified into 7 nursing areas and 21 nursing activities in recovery room. In terms of prevalence of nursing activities in the anesthesia preparation room, observation and cooperation of anesthesia was the most prevalent activity, drug and eqipment management the second prevalent, and drug administration the third. On the other hand, in the recovery room, the most prevalent activity was vital sign checking and observation, the second most prevalent activity informative activity, and the third body temperature control. Nursing activity time was recorded according to the nursing characteristics. In the anesthesia preparation room, the direct nursing spent for 8092.20 minutes was larger than the indirect nursing spent for 7198.50 minutes. Also, in the recovery room, the direct nursing spent for 2361.16 minutes was larger than the indirect nursing spent for 1134.13 minutes. 4. Nursing activity time was compared to duty shifts. In the anesthesia preparation room, the direct nursing was more prevalent on day shift and the indirect nursing was prevalent on evening shift. However, in the recovery room, both direct and indirect nursing activities were prevalent on day shift. Conclusion: The role of anesthesia and recovery room nurses was analysed according to the time, frequency, and its characteristics.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.48-55
• /
• 2008

Purpose: We measured linear distances, angles and inclinations on the cast models of the noses, and compared these indirect measurements with the direct measurements obtained from the nose in order to validate the accuracy of the indirect anthropometry using the cast model. Methods: Subjects were 50 males and 50 females, medical students in twenties(mean 27.1 years). Cast models were made from the alginate impression material and the plaster. In direct anthropometry, 16 linear, 7 angular, and 2 inclination measurements between 11 landmarks on the nose were obtained using sliding caliper, spreading caliper, and fabric tape measure. At the same time, the same measurements were obtained from the cast models of the same people. Total 25 measurements were compared, and tested by the independent t-test of SPSS. Results: The standard values of Korean nose in twenties were obtained. 24 measurements except the columellar labial angle were not statistically different between the indirect anthropometry and the direct anthropometry. Conclusion: Indirect anthropometry on the cast model of the nose revealed no significant difference from the anthropometric measurement statistically, accounting for 24 in 25 measurements(96%). There are two possible reasons that caused the difference of columellar labial angle between direct and indirect anthropometry. First, the columellar labial angle could be decreased by protrusion of the lips which resulted from contracting mouth in which an drinking straw had been applied on the mouth corner for patients' respiration during making cast model. Second, it is generally known that the columellar labial angle could be measured larger when soft tissues were pressed by protractor in direct anthropometry. Using a drinking straw with greater diameter, and scheming respiration through the nostrils that patients don't feel discomfort, the more accurate data would be obtained from the indirect anthropometry using the cast models of the noses.

• Korea Journal of Hospital Management
• /
• v.14 no.3
• /
• pp.23-48
• /
• 2009

The purpose of this study was to provide criteria which help executives to make decisions through the analysis of profitability of ultrasonography conducted in each medical department. In order to achieve such purpose, the study conducted break-even analyses on three medical departments of a university hospital in which has used ultrasonography was largely conducted in diagnosing diseases and performing surgeries. The research was carried out from January to June 2008. The data necessary for calculating cost, were collected using by computerized data. The results of the study were summarized as follows. 1. The Cost structure of each medical department: The Cost of ultrasonography was divided into direct cost and indirect cost through the categorization by cost object. Labor cost accounted for the largest portion of the direct cost with 69.3% in the department of obstetrics and gynecology, 67.4% in the department of radiology and 58.2% in the cardiac ultrasonography center, which followed by the depreciation cost of ultrasonography equipment. The calculation of the average material cost of each ultrasonographic test by medical test found that the cardiac ultrasonography center took first place with 2,355 won, followed by the department of obstetrics and gynecology with 266 won and the department of radiology with 233 won. As for the power cost of ultrasonography equipment, the department of radiology took fist place with 442,000 won. The power cost, however, did not affect much the cost price, because it accounted for only a small portion of the cost. As for indirect cost, the cardiac ultrasonography center ranked first with 7,156,000 won. Building depreciation cost accounted for the largest portion of the indirect cost. 2. Break-even analysis: Under the supposition that cost price can be divided into fixed cost and variable cost, a break-even analysis was conducted using the cost price confirmed through the cost structure of each medical department. As for the average customary charge of ultrasonography test conducted in each medical department, the department of obstetrics and gynecology charged 24,627 won, the department of radiology 53,179 won and the cardiac ultrasonography center 65,174 won. According to these results, the charges of ultrasonography test imposed by the department of radiology and the cardiac ultrasonography center wre enough to surpass break-even levels, but the charge imposed by the department of obstetrics and gynecology was not enough to offset the cost price. In conclusion, labor cost accounted for the largest proportion of cost price of ultrasonography test conducted in diagnosing diseases and performing surgeries in medical departments, followed by the fixed cost of ultrasonographic equipment depreciation cost. In medical department where the current charge of ultrasonography test turned out not to offset cost price through the break-even analysis of ultrasonographic equipment, ways to reduce fixed cost which accounts for the largest proportion of the cost price should be sought. Even medical departments whose current charge of ultrasonography test is enough to surpass break-even level are required to work for efficient management and cost reduction to continuously generate profits.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.23-34
• /
• 2020

In this paper, we proposes a method to automatically construct SHACL schemas for RDF knowledge graphs(KGs) generated by Direct Mapping(DM). DM and SHACL are all W3C recommendations. DM consists of rules to transform the data in an RDB into an RDF graph. SHACL is a language to describe and validate the structure of RDF graphs. The proposed method automatically translates the integrity constraints as well as the structure information in an RDB schema into SHACL. Thus, our SHACL schemas are able to check integrity instead of RDBMSs. This is a consideration to assure database consistency even when RDBs are served as virtual RDF KGs. We tested our results on 24 DM test cases, published by W3C. It was shown that they are effective in describing and validating RDF KGs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.697-704
• /
• 2016

Coal modified by acid treatment was investigated to analyze the correlation between the cell performance and electrochemical parameters in a direct carbon fuel cell (DCFC). The fuels were subjected to thermogravimetry analysis, gas adsorption test, and X-ray photoelectron spectroscopy to investigate the fuel properties and surface characteristics. After the treatment of raw coal, the thermal reactivity of the treated fuels increased, and the specific surface area decreased, though the mean pore diameters of three fuels were similar. The coal treated by $HNO_3$ showed the highest ratio of oxygen to carbon, and also an increase in the surface oxygen groups on the fuel surface. Through comparison between the fuel surface properties and electrochemical performance, it was confirmed that the surface oxygen groups have an influence on the improvement in the DCFC performance.