• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.9-16
• /
• 2013

In this research, the effect of a heating system, which is powered by direct solar energy accumulated in phase change material (PCM) as heat storage material installed on the floor surface, on the cooling load was studied. Cooling load of a test building designed for this research was measured with fan coil unit and factors affecting it were also estimated. Experiments were performed with and without PCM installed on the building floor to understand the effect of the PCM on the cooling load. Additionally, to confirm the experiments results, the prediction calculation formula by average outside temperature and integrated solar radiation was composed using multivariate regression model. The results suggested that the heating system with PCM on the floor surface has the potential to shift electric power peak by radiating heat, stored during the daytime in it, at night, not increasing the total cooling load much.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.85-91
• /
• 2021

With the social atmosphere of respect for human life and the increasing interest in safety of field workers, research and development is underway in various ways to transform direct live method into indirect live method in the field of distribution. As part of this measure, it was necessary to convert electric pole and complex facilities work from machining power distribution to indirect live operation, and install a straight connecting sleeve that connects cut wires for by-pass method, but it failed to meet the tensile strength standard when constructing a sleeve constructed by direct method. In this paper, the design factors were derived based on the case of overseas similar sleeves and the tensile strength evaluation of each variable was performed, based on the analysis of these test results, the method for securing tensile strength of straight-line access sleeves for indirect running was presented.

• Analyses & Alternatives
• /
• v.5 no.2
• /
• pp.3-38
• /
• 2021

Does Foreign Direct Investment (FDI) exacerbate income inequality in South Korea? If so, does rising income inequality come for the sake of economic growth? This study explores the impact of FDI on income inequality and growth in South Korea. To this end, we collect data on FDI and income inequality/economic growth at both national and provincial levels and empirically test their relationships in South Korea. The empirical results confirm our expectation that FDI magnifies income inequality. Furthermore, we fail to find a positive relationship between FDI and economic growth, implying that income inequality as a consequence of FDI does not come for the sake of economic growth in Korea. Findings suggest that more systematic research and nuanced policy design is necessary to circumvent the mechanisms at play that link the surge of FDI inflows and the exponential expansion of economic inequality.

• Journal of Korean Academy of Nursing
• /
• v.27 no.3
• /
• pp.614-626
• /
• 1997

The main purposes of the study were to develop and test a model which explains the dynamic relationship among factors reported as affecting to the quality of life of individuals with rheumatoid arthritis and to examine the relationship between self-help response and quaility of life. Data for the study were collected from March 1996 to December 1996 from 153 female patients who regularly visited a clinic for people with rheumatism. The patients were introduced to the investigators by nurses who worked at that clinic, and then the investigator interviewed the patients for 30 to 40 minutes to collect the data. Instruments used in the study were modified self-report questionaires from the ones which were already developed in previous studies or from related literature. Data analysis were performed using LISREL(Lineal Structural Relations) 8 program to test whether the proposed hypothesized model fit the collected data. To test the fitablity of the hypothesized model both a general fit measure and a detailed fit measure were used. Based on the test results from the various fit measures, the hypothesized model was found to be well suited to the real data. As characteristics related to illness becomes severe, the feasibility for these characteristics leading to the perception of uncertainty about the illness tend to increase, but, the direct effects from the illness characteristics(such as level of physical symptoms, sense of social-psychologic change, limitations of action) as they are related to the other intrinsic variables (self-efficacy or self-help behavior and quality of life), were found to be not significant. It was found that uncertainty had a direct effect on self-efficacy but did not have a direct effect on self-help behavior or quality of life. Also, it is noted that self-efficacy had a positive effect on self-help behavior and quality of life and there was a bilateral relationship between self-efficacy and self-help behavior. Lastly, the hypothesis proposed from the theoretical model in this study was supported basis of the results that self-help behavior provides both direct and positive effects to quality of life. Particularity, since a bilateral relationship was also found between self-help behavior and quality of life in the modified model, as self-help behavior increased, so did quality of life. And, reversely, as quality of life increased, so did self-help behavior. In conclusion, the results of this study suggest that focusing on both acquirement and reinforcement of adjustment factors or self-help behavior is more efficient than focusing on the characteristics of illness in establishing the stategies for improving quality of life of individuals with rheumatoid arthritis.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.45-55
• /
• 2009

The quality of railroad trackbed fills has been controlled by field measurements of density and bearing resistance of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. To overcome the defect, the compressional wave velocity was adopted as a control measure, in parallel with the advent of the new design procedure, and its measurement technique was proposed in the preliminary investigation. The key concept of the quality control procedure is that the target value for field compaction control is the compressional wave velocity determined at optimum moisture content using modified compaction test, and direct-arrival method is used for the field measurements during construction, which is simple and reliable enough for practice engineers to access. This direct-arrival method is well-suited for such a shallow and homogeneous fill lift in terms of applicability and cost effectiveness. The sensitivity of direct-arrival test results according to the compaction quality was demonstrated at a test site, and it was concluded that compressional wave velocity can be effectively used as quality control measure. The experimental background far the companion study (Park et al., 2009) was established through field and laboratory measurements of the compressional wave velocity.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.247-260
• /
• 2012

In order to reduce the amount of steel reinforcements in TBM tunnel segments, the use of Steel Fiber Reinforced Concrete(SFRC) is being tried. The steel fibers with higher aspect ratio than that used in tunnel shotcrete are preferred to compensate the deficiency in tensile strength of the segments. In this study, the tensile properties of SFRC with aspect ratio of steel fibers equal to 80 were evaluated through flexural test and Double Punch Test. In the results of flexural test, flexural strengths of the SFRC were increased about 30%~150% thanks to bond of steel fibers used to concrete and could be properly predicted by the equation proposed by Oh(2008). There was a great difference in the estimated direct tensile strengths of the SFRC by the equations presented in ACI and RILEM. It was found that the Double Punch Test could be suitable methodology to estimate the direct tensile strength presented in RILEM of the SFRC.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.481-486
• /
• 2017

This paper aims to evaluate the characteristics of direct and indirect effluents'toxicity level and difference between two test durations (24 h and 48 h) of test method. The proportion of the indirect effluent samples which exceeded the ecotoxicity permit limitations (TU 1 or TU 2) showed more than 2 times higher than that of direct effluent samples. However, effluent toxicity of Wastewater Treatment Plants (WTPs) indicated less than TU 1 regardless of influent toxicity. From this results, treatment process was thought to have a good efficiency. WTP Salinity was very similar between influent and effluent. This trend could be reconfirmed by the component ratio of ion concentration between them and $Na^+$, $SO_4^{2-}$, $C^-$ lions which have a greater percentage than other ions. In addition, in case of high salinity, toxicity value also showed high level. To judge from above results, indirect effluents which were exempted from application of ecotoxicity standards, may need a new effluent limitations regardless of the treatment efficiency of WTP. According to circumstances, effective countermeasure may need to restrain the discharge of salinity-contained effluents which came from indirect-effluent factories. Test duration comparative study indicated that 48 h results were higher toxicity (exceeding rate of ecotoxicity criteria) than 24 h by the 5 to 5.4 percentage. 24 h test duration seemed to be useful in case of rapid detection, whereas 48 h test method could be applied for reinforcement of ecotoxicity regulatory system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.290-293
• /
• 2017

A direct-connected, continuous type combustion test facility was developed to test a supersonic combustor model used in scramjet engines. The facility requirements were determined by assuming the flight speed of Mach 5, yielding the combustor inlet flow speed of Mach 2. Also the cross-section of the supersonic combustor under test was assumed as $32mm{\times}70mm$. As a result, the facility was designed to have the flow total pressure of 548 kPaA, total temperature of 1,320 K, and flow rate of 0.776 kg/s. The facility consists of a turbo type air compressor, electric air heater, vitiation air heater and a two dimensional facility nozzle to accelerate the flow to Mach 2. Also, an oxygen supply system was added to compensate the vitiation. The exhaust de-pressurization system is not added. Designed pressure, temperature, and flow rate were verified through the test operation of the facility.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1477-1478
• /
• 2004

Science the change of development methods and environment of the software is rapidly kept going in industry, previous manual test methods will not be able to guarantee the quality of software. Therefore the software test automation tools is being developed actively. And many of the tools which is reliable is applied and used in domestic organizations. Indirect test techniques currently are used For the improvement of the software quality, such as formal specification and design, structural programming. And also the various do direct test techniques are used to the measurement of software quality through the fault detection and modification, such as black box, which box and test automation tools. In this survey, the software test automation tools which predicate and access the software quality at the software development phase for the improvement of the software quality should be introduced.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.79-82
• /
• 2008

It has been reported that destruction test by core collection is the most reliable of the structural concrete strength in present building construction field. But it causes low efficiency by damage and cutting in structure due to the core collection. It also has some problems in repairing. Additionally in case of strength test with management specimen, different environment compared to the structure environment cause problems about estimation precise structure strength. Therefore, it is required to develop structure direct strength test that has test values and credibility above the ones obtained by core specimen collection strength test and seasonal specimen test to suggest a reasonable and practical management method of structural concrete.