• Kyungpook Mathematical Journal
• /
• v.60 no.4
• /
• pp.869-881
• /
• 2020

Most first kind integral equations are ill-posed, and obtaining their numerical solution often requires solving a linear system of algebraic equations of large condition number, which may be difficult or impossible. This article proposes a regularization-direct method to numerically solve first kind Fredholm integral equations. The vector forms of block-pulse functions and related properties are applied to formulate the direct method and reduce the integral equation to a linear system of algebraic equations. We include a regularization scheme to overcome the ill-posedness of integral equation and obtain a stable numerical solution. Some test problems are solved using the proposed regularization-direct method to illustrate its efficiency for solving first kind Fredholm integral equations.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.279-286
• /
• 2019

In this study, an experimental study on the tensile properties of steel fiber-reinforced ultra high strength concrete(UHSC) with a standard compressive strength of 180MPa was performed. Steel fibers with a volume ratio of 1% were mixed to prepare direct tensile strength specimens and prism specimens for the three-point bending test. The fabricated specimens were set up in the middle section of the specimen to induce cracks, and the test was carried out according to each evaluation method. First, the stress-strain curves were analyzed by performing direct tensile strength tests to investigate the behavior characteristics of concrete after cracking. In addition, the load-CMOD curve was obtained through the three-point bending test, and the inverse analysis was performed to evaluate the stress-strain curve. Tensile behavior characteristics of the direct tensile test and the three-point bending test of the indirect test were similar. In addition, the tensile stress-strain curve modeling presented in the SC structural design guidelines was performed, and the comparative analysis of the measured and predicted values was performed. When the material reduction factor of 1.0 was applied, the predicted value was similar to the measured value up to the strain of 0.02, but when the material reduction factor of 0.8 was applied, the predicted value was close to the lower limit of the measured value. In addition, when the strain was greater than 0.02, the predicted value by SC structural design guideline to underestimated the measured value.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1476-1484
• /
• 2021

The purpose of this study was to compare the golf performance on transcranial direct current stimulation(tDCS). Ten collegiate golfers were participated. SAMPutt basic unit was used to analyze the kinematic data of putter head. A putting platform and a tDCS were used for putting tasks. It was performed paired t-test to compare between before tDCS and after tDCS. A significant level of .05 using SPSS 24.0. Face at aim and backswing variables of putter head were significantly different during flat putting. Impact spot of putter head was significantly different during 2° of hook slope. However, there were not significantly different others slope angle. It was found that transcranial direct current stimulation had a positive effect on kinematic variables. Based on these results, further research is needed to confirm the effect of transcranial direct current stimulation on body stability during putting task.

• Asia Marketing Journal
• /
• v.15 no.2
• /
• pp.29-47
• /
• 2013

Distribution channel decisions involve long-term commitments with other firms that are very difficult to change or replace. In particular, marketing channel decisions in emerging markets are much more complicated due to unfamiliar conditions and problems such as lack of market data and distribution systems. Therefore, when a company considers changing or introducing a marketing channel in an area, it is much more difficult to judge its effectiveness in an emerging market than in a developed market. In this study, we investigate the development process of a new direct marketing channel of Hongfu Fertilizer Company (hereafter Hongfu), a medium-sized Chinese fertilizer manufacturer, and propose an approach to test the feasibility of this new marketing channel in the Chinese rural market. We measure the effectiveness of Hongfu's new marketing channel from two perspectives: i) from customers' perspective through direct responses of farmers, which showed that a new channel can increase the convenience and lower the purchasing costs for the farmers, and ii) from the company's perspective, by calculating the incremental profit of the company using the expansion factor (T/Q) method, which suggested that the execution of Hongfu's strategy to expand a new marketing channel will result in an increase in profits. The results of this study contribute to the development of a methodology to test the feasibility of a new direct marketing channel in the emerging markets such as the Chinese rural market. Traditional and indirect distribution channels in emerging markets are generally not very efficient and difficult to change. Especially, in emerging markets, like the Chinese rural market, the methods of testing channel feasibility must be different from that of developed markets. Considering market situations, market experiments can be more effective then systematic market surveys in testing channel feasibility in emerging markets. This study implies that managers must learn to cope with a transition from the traditional marketing channels in emerging markets. With the development in farmers' understanding of marketing concept, the transition from traditional marketing channel is unavoidable for all firms. Farmers in China are generally very conservative, however, their buying behaviors are changing. Therefore, fertilizer companies should try to adjust in accordance with farmers' demand characteristics that the efforts to meet the economic needs of farmers with new marketing channels as well as trust building are critical in the near future.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.69-82
• /
• 1999

Direct shear tests are perfromed for artifical joint models made of cement with 25 types of different strength and roughness. The tests consist of the multi-stage test which is a common test method for a single joint plane and the test method suggested by ISRM. Then, not only the differences of friction angles between the two test methods are compared, but is the effectiveness of the multi-stage test investigated. The average of friction angles measured from the multi-stage test is $6.4^{\circ}$ lower than that from the ISRM test. Although the strength and roughness of samples vary, the differences of friction angles between the two test methods are constant. The relationship between the shear stress and the normal stress measured from the multi-stage test is well correlate with the Patton's equation. Whereas, the Barton's equation is best fitted with those measured from ISRM test.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.9-21
• /
• 2021

In this study, the difference between the preservative efficacy test (PET) used for water dispersion formulations and PCPC (personal care products council) guidelines alternative test method, direct contact membrane method, and surface mold test should be studied to determine what should be considered during preservative efficacy test of water non-dispersible formulations. We conducted improved PETs when using the alternative test method compared with the test methods used for stick and pressed powder. There was no significant improvement between water-in-silicon emulsions and loose powder using alternative test methods. When we checked the results of the presence and absence of the preservative system for each product, we could see that there were differences in testing methods. As a result, improved levels of results could be obtained using both existing and alternative test methods when measuring preservatives for water non-dispersible formulations. In addition, in the case of stick and pressed powder, the results were more effective when the preservative test method applied to the consumer's method of use was applied.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.6
• /
• pp.484-488
• /
• 2013

Objective : To examine the synergistic effects of both computer-assisted cognitive rehabilitation (CACR) and transcranial direct current stimulation (tDCS) on cognitive function in patients with stroke. Methods : The current double-blind, sham-controlled study enrolled a total of 11 patients who were newly diagnosed with stroke. The patients of the tDCS group (n=6) completed sessions of the Korean computer-assisted cognitive rehabilitation program five times a week for 30 minutes a session during a mean period of 18.5 days concomitantly with the anodal tDCS over the bilateral prefrontal cortex combined with the CACR. The patients of the control group (n=5) also completed sessions of the sham stimulation during a mean period of 17.8 days. Anodal tDCS over bilateral prefrontal cortex (F3 and F4 in 10-20 EEG system) was delivered for 30 minutes at an intensity of 2 mA. Cathode electrodes were applied to the non-dominant arm. All the patients were evaluated using the Seoul Computerized Neuropsychological Test (SCNT) and the Korean Mini-Mental State Examination. Results : Mann-Whitney U test revealed a significant difference between the two groups. The patients of the tDCS group achieved a significant improvement in the post/pre ratio of auditory continuous performance test and visual continuous performance test on the SCNT items. Conclusion : Our results indicate that the concomitant use of the tDCS with CACR to the prefrontal cortex may provide additional beneficial effects in improving the cognitive dysfunction for patients with stroke.

• PNF and Movement
• /
• v.11 no.2
• /
• pp.9-19
• /
• 2013

Purpose : Study on the effects of attention(working memory) for normal adults by applying transcranial Direct Current Stimulation(tDCS). Methods : There are two groups of 10 random people aged between 20 to 30, one is an experimental group(stimulation) and the other is a comparison group(simulate stimulation). For the 1st da y, pre-stimulation test is executed, and for the 2nd day to the 4th day, tDCS is applied stimulated both on the right prefrontal lobe and the left occipital lobe through the electrode. The stimulation lasts for 15 minutes with voltage power of 1mA for each day. The post-stimulation test is executed on the day of 5th. In this paper, a FAIR attention test is used for measuring the attention. Results : As the result of the experiment, there are significant gaps both on the value of P, the ability of selective attention, and the value of C, the consistent ability after the stimulation on right prefrontal and left occipital lobe. And there is no significant gap on the value Q, the quality(Control). However, all the P, Q, and C values are increased according to the average value between the pre-stimulation test and the post-stimulation. Conclusion : Finally, ability of selective attention and self-control, and consistent attention is progressed by applying the tDCS to the normal people.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.3
• /
• pp.79-87
• /
• 2022

Background: The purpose of this study was to examine the effect of transcranial direct current stimulation (tDCS) on the pain and balance of patients who receive total knee arthroplasty (TKA). Methods: This study subjects were 24 patients in Hospital T, located in Daegu, South Korea who received TKA after being diagnosed with degenerative arthritis. The subjects were randomly divided into and experimental group and a control group, with each group including 12 patients. Both group received superfical thermal therapy, interferential current therapy (ICT), and continue passive motion (CPM), which are conventional knee therapy on the knee joint. The experimental group received the tDCS treatment three times a week for three weeks, from October 1st to October 20th. The visual analogue scale and Wii Balance Board system were used to measure the pain and balancing ability, respectively, of both groups. In the statistical result analysis, to compare about pre and post test difference in each groups was accomplished. Statistical analysis of independent t-test and paired t-test were conducted using SPSS version 23.0. Results: After three weeks of intervation, there were significantly difference in balance ability in pre and post test in the tDCS group. VAS decreased significantly in both groups(p<.05), There was a significantly difference in pain, balance ability in the tDCS group compared to the sham group. Conclusion: These results indicate that applying tDCS together with conventional knee joint therapy for TKA patients is effective in promoting the patients' recovery.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.101-110
• /
• 2008

This paper investigates the mechanical characteristics of monofilament-reinforced bottom ash mixtures for recycling dredged soil. Reinforced bottom ash mixture is a lightweight soil added with monofilament in order to increase its shear strength. Test specimens were fabricated by various mixing conditions including monofilament content, its length and its diameter. Then several series of unconfined compression tests and direct shear tests were performed to investigate mechanical characteristics of reinforced lightweight soil. The experimental results indicated that stress-strain behaviors of reinforced lightweight soil were strongly influenced by mixing conditions of monofilament content, its length and diameter. The compressive strength of reinforced lightweight soil generally increased by adding monofilament. In this test, the maximum increase in compressive strength was obtained at 0.5% content and 4cm length of monofilament. These results were similar to those of direct shear tests. The unconfined compressive strength of reinforced lightweight soil with monofilament of 0.25mm in diameter was greater than that of reinforced lightweight soil with monofilament of 0.5mm in diameter.